New REAR AXLE and rear end restoration on my Citroen Berlingo Multispace
HTML-код
- Опубликовано: 8 май 2021
- This is a long one but I take you through replacing the rear axle on the floor with no ramp on my 2006 Citroen Berlingo Multispace. It's an easy enough job but I carried out a mountain off jobs while the axle was off :)
Thanks to IMAXLES for providing the replacement unit super quick :)
You can buy refurbished units at:
www.imaxle.co.uk/
I ended up going full in , under sealing it and replacing the below parts:
Shock Absorbers eBay Link:
ebay.us/ZgtFTp
Rear Brake Lines eBay Link:
ebay.us/mAplvr
Brake Shoes & Cylinder eBay Link:
ebay.us/hGxHAI
Hub Nut & Cover Set eBay Link:
ebay.us/AnsVIs
Rear Flexi Hose Brake Pipes eBay Link:
ebay.us/tgx2qM
Exhaust Middle Section eBay Link:
ebay.us/8wToPu
Exhaust Rear Section eBay Link:
ebay.us/6aaQ5t
Exhaust Clamp eBay Link:
ebay.us/Jgnur5
Wheel Cylinder Bolts eBay Link:
ebay.us/3nnGNy
40mm Hub Nut Socket eBay Link:
ebay.us/TDtnwS
Join this channel to get access to perks:
/ @projectfearn 
Авто/Мото
Well done fella! What an epic rear end restoration with so many fiddly jobs to do - made even more fiddly setting up a camera to film it for our enjoyment. Thanks again for the content mate. Great to see the Berlingo living on for a good few more years!
Thanks phil😎
Excellent job, well done 💯✅ Congratulations & wish you many years of safe motoring in the Clean Berlingo 🏆
Watched all your videos on this car which led me to buy an 06 Partner in Feb 👍. Your rear wiper video was the perfect help. Whilst the Rear axle isn’t bad, it needs doing by the end of the summer so this was perfect timing. Would do sooner but Service, Cambelt, Water pump and power steering rack are up first (it was dirt cheap)!
Best car I’ve ever bought, nothing it can’t do.
I've just bought another with a broken rear axle. I'm going to do the video again but in much move detail and break it down into specific parts so it's not just one long video 😎
@@projectfearn yes I’ve seen your post, can’t wait mate.
as much as that’ll help me come the time, it’ll make for great watching! Agree with your comment in your recent video, the Berlingo/Partner just have that wide appeal to so many. Great channel too 👍
🤙🤙🤙
Hello,
I made it to the end me too!
Thanks a lot for a great video. It will be helpful when it is time to change the axel on my Berlingo.
I will also watch your second Berlingo axel video.
Thank again
Glad it helped!
Thanks for taking the trouble to make this video. Really enjoyed watching it all. I've got a 2000 1.9 diesel which I love but having to look for a petrol one as I'm driving in London sometimes. It is interesting that ' rear axle corrosion' appears as an advisory on MOTs on these Berlingos quite a bit.
Yeah the surface rust looks alot worse than it is. Like flacking paint coming off the torsion bars etc. I've made another set of videos doing an axle on my parents blue berlingo pal 👍
I wondered if you considered leaving the axle in situ and pulling off the trailing arms and renewing the bearings yourself. Seems to be possible.
If it was a couple of years old yes but with most of these cars and the surface corrosion I can't imagine it being a fun job. Plus as you can see in both my axle videos, other parts are shot too. You'd deffo need a set of burner bottles 😎
Nice job mate 👍 thats kept you busy! Loved the video thanks
Cheers mate. Actually enjoyed making this one for a change. 😎
Good job, plenty of content, good luck on the MOT
Cheers pal :)
Well done mate ! Danny the Peugeot legend now 💪
Wow wow wow. Its a Citroen mate
Berlingo wanted must have a new rear axle and whatever you did to it lol. I made it to the end and I am going to bed now. Top video buddy. I would of thrown it on the lawn and gone down to pub 🤣🤣🤣
🤣🤣
I love my old 03 plate berlingo my back axle is toast as well its rubbing on the inner arch now
Bloody hell. I have another berlingo which needs an axle and will be doing another video on this :)
Selling us English Citroën vehicles is France's revenge for Agincourt 😂
They are gifts mate not revenge ha 😉
@@projectfearn Each to their own poison lol. At the age of 85, I have worked (professionally) on many vehicles of many types & by many manufacturers & Citroëns are just not my cup of tea. But hey, great video nevertheless👍
Cheers pal 👍 what's your favourite motor pal?
Great video mate I have a berlingo and think they are brilliant keep safe mate
Cheers Martin
Excellent work!
Thank you 😊
Hey I ain't going nowhere till I've seen this.😂😂😂❤️✌️👊
😎😎😎
Nice video buddy you done well on your own well done buddy
Thanks Gordon. I really enjoyed this one pal. I took my time and it turned out sound in the end 😎
This torsion bar rear.. is this the part that fails ?
amazing how bits of wood help out...surprisingly halfords dont sell em.. :)
great attention to detail with the abs brackets.... ive got some stuff called vatcan... they use it on ships..
show car now..you need some under led lights to hightlight the work...
its always a question of far you go..
enjoyable watch with my sausage roll..
thanks Danny..
N x
Cheers Neil mate 😎
She looks the business in red 😍
Hi Danny! Do you have any videos on replacing the front springs?
hi danny
i made it to the end!!!!
Great job done, to say you only had one pair of hands to get that axle up and in position, but how much as it cost in the end, it seemed like it was one thing after the other. But i admire your staying power, i'm the same if its worth doing do it right !!
regards
kev
I think in total maybe around £350 I think. I have another berlingo with a knackered axle so I will do another video split into parts with more of a cost breakdown in it. 😎
@@projectfearnThanks. look forward to that.
🤙🤙🤙
Good stuff thanks
Thanks Kevin 😎
Hi Danny, love the videos as much as I love my own berlingo. I've lowered the front of mine by 60mm and am planning to do the rear too. Any chance of doing a video or rearing the lower? Unless you want to do it for me??? :-)
I think if you have the original axle on pal you are going ylto have a nightmare. Imaxles do refurbished axles and you can ask them to set the ride hide before ordering I think. Danny
Great video! I tried to follow some of the links that you provided, is ther a generic list of spares needed (once you purchase the axle) of the bits and bobs that are the 'usual suspects' that need replacing when doing this job? A parts list of sprts? Pug Partner 2006 (M59)
On ebay you can put your car details in and find the correct parts. Check out my other videos on the blue berlingo. I go through all the parts and costs 💯
Thanks. Ebay is def a rabbit hole......
I know mate. Danny
I know mate. Danny
Max L watched with interest as I'm doing a similar job on my 2005 Berlingo. Problems so far brake shoes incorrectly fitted, all brake pipe nuts rounded, suspect wrong rubber pipe brackets fitted, brackets retainer clips missing, hard to locate spares for brake clips, hand brake routed wrong inside drum, all springs mounte behind shoes, hub nuts overtightened, Bearing dry and noisy.
Any idea where I can get the pipe brackets? This is the only job left.
Pipe brackets are going to have to be made mate as they turn yo dust. Danny
je moznost pri repase napravy zadnej upravit svetlu vysku podvozku?
I had to do mine in my van on the side of the road
Haha that's grim mate 😅 😂 🤣
What are the symptoms for bad rear axle? Thanks for the video!
You can usually hear the axle clunking like a really metallic noise. If you jack the car up you can also rock the wheel and see the movement in the trailing arm. I have another one I'm doing in the next couple of weeks and will go into a lot more detail :)
@@projectfearn Perfect, thank you for answering! :)
You are welcome 😎
@@projectfearn when you mean clunking, is that when going over bumps or when standing on the "back" and push/jump the vehicle up/down? :)
Over bumps and also driving etc. 😎
Fancy doing mine for me 😊
🤣🤣🤣🤣
Hi Dan, my rear axle went yesterday when coming back from my hols in poole (cost me £450 to get car recovery = 150 miles "ouch", I love my 2005 Berlingo desire 2.0HDI - Question;- How long would it take to remove old axle and fit a refurb axle?.........I gonna use a mobile mechanic who does my servicing to take a look.
Dayum pal. That is a big recovery charge pal. He could easily have it done in a day if everything comes off easily and nothing else needs replacing like shocks or brake lines etc pal. How bad has the axle gone? Is it not driveable at all?
@@projectfearn Hi Dan, thanks for replying mate, we drove it to a MOT station in poole, he jacked it up either side ( wheel loose on one side (80% off side) when he moved it from top to bottom) and said it was the axle - Really bad on one side (nearside) = total calapse on (near side) and 80% on the other side (offside), the car was and is driveable for short distance = but not safe for a long distance or low speed driving, but my friend weighs 193 KG = he was sitting in the rear where it calapsed before we set off - Im hoping no welding needs doing or wether to scrap the car?.........whats your thoughts?....is it worth repairing?.........or try to buy another vehicle?
Are you on Instagram pal? Drop me a message, search for projectfearn or drop me an email danny@projectfearn.co.uk
@@projectfearn Not on instagram, but will email you,....thanks Dan
No worries :)
What are the symptoms of the rear axle being faulty
Usually one side will make a noise. The bearing on the trailing arm collapse and make a horrible metallic clunking noise. You can also feel play in the bearing at the early stages. It's a really poorly designed axle. My car got to around 100,000 miles before I needed to change it and the blue one got to around 140000 miles I think. 😎
Usually one side will make a noise. The bearing on the trailing arm collapse and make a horrible metallic clunking noise. You can also feel play in the bearing at the early stages. It's a really poorly designed axle. My car got to around 100,000 miles before I needed to change it and the blue one got to around 140000 miles I think. 😎
@@projectfearn thanks for the reply that sounds like what's happened on mine how long before they become undrivable
I'd be getting it replaced as soon as you can pal. How many miles has it done?
Hi Danny, I was looking for your email in the about section. I just had a few questions about the berlingo multispace.
danny@projectfearn.co.uk
@@projectfearn thanks Danny
@@projectfearn Hi Danny I sent you an email. Having problems with a berlingo I bought just looking for advise.
I've seen them pal. Once I get a minute I will get a reply over to you mate :)
@@projectfearn thanks Danny sorry ya I understand it was the weekend and you need a break from work like us all. Apologies for my impatience I was just a bit worried about my berlingo. Chat to ya when your free thanks 👍
Hi buddy who did you order the axle from ?
Paul In N ireland
Hi mate. Company is in the description IMAxles :)
In below the van and no pins in your axle stands? 🤔
They are on their lowest setting as you can see in the video so a pin isn't used or will fit in as the holes only start when you jack the car up even higher. The rear wheels are placed under the vehicle too for extra safety. 😎