Thank you very much for this tutorial. I've successfully done the rotors and pads on my MK7.5R, incase anyone is interested, I went with the "cheaper route"- I purchased a ELM327 OBD2 Scanner and used an app called Carista to open my Electronic Parking Brakes.
Thank you for this tutorial! It was very helpful. (It came out three days after I ordered new rear carrier bolts from FCP - whoops) One important thing this video didn't mention - some rear pads will need to reuse that metal shim on the outside pads. The TEXTAR pads needed this shim since there was way too much play.
Thanks for the video very well explained , it helped me do my brakes much faster so good ATE designed this rotor to be removed without removing the caliper bracket.
A nice, well-presented, very helpful instruction video - thanks. Of interest, after reinstalling everything do you use the diagnostic software to end the procedure first and then pump brake pedal pressure, or pump the brakes and then end the procedure? Or doesn’t it matter either way😅
I notice the old out board pad had a silver coloured shim cover on it, and this wasn't moved over to the new pad. Is that right, is that silver shim cover not really required for the new pad?
Hi Jefferson, some pad manufacturers will often include them based on the sizing of the backplate, not mandatory, only to be used if part of the pad replacements you are installing.
Yea it won’t affect it and you don’t want your battery dying either. When you put everything back together. Turn the ignition back on and code it to close
@fcpeuro I figured. Only problem now is one of my lug bolts is seized right on. I have a 1/2in impact wrench with 1600lbs of nut busting torque. Not even that is breaking it free. Might have to drill it out.
More than likely, they are using existing tooling to create these pistons, vs creating new tooling and adding an unneeded cost when manufacturing. This is just my guess! -Mike
@@brdpit Not worth the risk. Save a few bucks and risk ruining the calipers. VW manual clearly states if you force pistons back without doing the diagnostic procedure the epb motors will be damaged. Some idiots are even telling viewers to dismantle the motors which VW warn against doing.
Lol wtf. It doesn’t matter if a rotor is scratched, it’s going to get all scratched up anyways from the brake pads rubbing up against it. My new rotors from the dealership also were scratched
Fantastic video. Did the whole job in about 2 hrs with high confidence since all the details were provided. Thanks!
Nice work, Jay!!!
What obd eleven do You need
So no need to replace the rear carrier bolts since we can slide the rotors around them. Pretty slick! Thanks for the video.
Thank you very much for this tutorial.
I've successfully done the rotors and pads on my MK7.5R, incase anyone is interested, I went with the "cheaper route"- I purchased a ELM327 OBD2 Scanner and used an app called Carista to open my Electronic Parking Brakes.
We're glad it was helpful!
@@fcpeuro Silly question, but would this step be needed if the vehicle is a manual? I'm assuming no?
yes as long as u have electric park brake, doesnt matter if its automatic or manual@@KaputtEqu1pment
@@KaputtEqu1pment not needed. You are right. Just did mine.
Fantastic video, quality camera angles and instructions perfect. Im about to get mine done and ur info helps heaps
Good demonstration. Thank you!
I can retract the park brakes with OBD11. 👍
Absolutely useful video. Thank you so much for it, I changed brake pads without effort✌🏼✌🏼
Thank you for this tutorial! It was very helpful. (It came out three days after I ordered new rear carrier bolts from FCP - whoops) One important thing this video didn't mention - some rear pads will need to reuse that metal shim on the outside pads. The TEXTAR pads needed this shim since there was way too much play.
Thanks for the video very well explained , it helped me do my brakes much faster so good ATE designed this rotor to be removed without removing the caliper bracket.
Thank you for this Video. Very informative & clear.
Thank you 🤙🏻
Great video😊
A nice, well-presented, very helpful instruction video - thanks.
Of interest, after reinstalling everything do you use the diagnostic software to end the procedure first and then pump brake pedal pressure, or pump the brakes and then end the procedure? Or doesn’t it matter either way😅
Thank you for watching! We end the parking brake procedure, then pump the pedal a few times before taking it out for a test drive.
How do you know when you dont have to use the special tool that twists the piston in? Is that only on cars with the electronic parking brake?
7:49 what liquids did you use to clean up the calipers and carrier?
thank you so much for sharing this video. - will this be same for VW GTI 2018 model?
Thank you for watching! The same general process will apply to your GTI!
You can use the obdeleven to enter service position. I have it so that’s a bonus
Great note!
Same here. They are worth having to do tweaks e.t.c
I have a MK7 Sporstvan. Do I have to remove the carrier or can I also slide the rotors around? Thanks!
Can you reuse the silver plate in front of the outer pad as it was originally? Does it fit with these aftermarket pads?
Do you close the electronic parking brake first and then pump the brake peddle or doesn’t it matter?
Thanks
Great diy as always 😎💪
Thank you for the tutorial 👍.
Does this apply to a 2017 VW Alltrack with manual transmission with hill descent control??? Thanks!!
I notice the old out board pad had a silver coloured shim cover on it, and this wasn't moved over to the new pad. Is that right, is that silver shim cover not really required for the new pad?
Hi Jefferson, some pad manufacturers will often include them based on the sizing of the backplate, not mandatory, only to be used if part of the pad replacements you are installing.
"calibrated wrist" 💯😄
Can the ignition be shut down after opening the brakes by OBD and while working on the brake? Or has the ignition to be on all the time?
Yea it won’t affect it and you don’t want your battery dying either. When you put everything back together. Turn the ignition back on and code it to close
Are the GTI non performance pack rear rotors the same, where you don't need to remove the carrier to remove the rotor?
Been a while, but yes same setup no need to remove caliper housing
So I have a 2019 golf r I can use a standard piston compressor tool for rear calipers? I thought it was rotated ?
Hi Travis, as shown here, they do not need to be spun in, your 19' model should be the same!
I have a 2018 Volkswagen Golf TSI Highline. Do I need that computer to read my car even though my parking brake is manual?
You will not need a scan tool if you do not have an electric parking brake!
@fcpeuro I figured. Only problem now is one of my lug bolts is seized right on. I have a 1/2in impact wrench with 1600lbs of nut busting torque. Not even that is breaking it free. Might have to drill it out.
You dont need any autel or other scan tool. Unplug electric brake motor wire and apply 12v. This saves lots of cash for a one time job
How come there are notches on the piston if they don’t need to wind back?
More than likely, they are using existing tooling to create these pistons, vs creating new tooling and adding an unneeded cost when manufacturing. This is just my guess!
-Mike
I have just a normal pull handle for my e brake do I still need the 808?
No need! Just make sure it's down before you start your brake job.
Is there a good way to retract the electronic parking break without a scan tool?
Nope
Yes, remove the electric motor and manually twist it back. ruclips.net/video/5kWHFDzoWyk/видео.html Easy.
@@MoistVW yes you can, plenty of videos how.
@@brdpit Not worth the risk. Save a few bucks and risk ruining the calipers. VW manual clearly states if you force pistons back without doing the diagnostic procedure the epb motors will be damaged. Some idiots are even telling viewers to dismantle the motors which VW warn against doing.
Need obd eleven .
👍👏👌
Your packing system sucks
My new rotors arrived scratched
Shipping box was filled with paper
Nothing else to protect the rotors.
Lol wtf. It doesn’t matter if a rotor is scratched, it’s going to get all scratched up anyways from the brake pads rubbing up against it. My new rotors from the dealership also were scratched