I make an Industrial Style Wall Coat Rack using Tow Hooks and Rebar.
HTML-код
- Опубликовано: 21 ноя 2021
- In this video, I make an Industrial Style Wall Coat Rack using Tow Hooks and a Rebar rod to give it a real industrial decor look.
It was a good MIG welding project for me, I love the old-style rustic industrial decor.
The wide steel plate is 3mm thick, 550mm long, and 75mm wide.
The other steel plate is 6mm thick, 520mm long, and 50mm wide.
The big Rebar is 20mm rebar and the small rebar is 12mm
The main tools used were welding Magnets, a MIG welder, angle grinder, locking Pliers, and a Drill.
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Tools / Supplies, I often use are.
Marking out Tools
Markal Silver-Streak Metal Marker Round: amzn.to/3mTJDHt
Milwaukee 4pk Inkzall Black Ultra Fine Point Pens: amzn.to/2WKKpeE
Milwaukee Inkzall Jobsite Fine Point Black Permanent Marker 12 Pack: amzn.to/3kHrXfo
Locking Pliers - Vise Grips
MILWAUKEE 10” Locking Pliers, Curved Jaw: amzn.to/3zzJH2u
Milwaukee 6" Long Nose Locking Pliers: amzn.to/3jyVLeS
Milwaukee 6” Locking Clamp Regular Jaws: amzn.to/3jB94eI
KNIPEX Tools Long Nose Grip Pliers: amzn.to/3ByD1SP
Magnets
Magnetic V-Pads Kit, Magnets On Both Pad Face & Bottom: amzn.to/3DCya4W
Mini Magnetic Fabrication Square Magnets Angles: 30°, 60°, 45°, 90°: amzn.to/2WN9Fkr
“L” shape Corner Square Magnets 12°, 90° & 60° Angle Setting: amzn.to/2YaZXsU
My camera set-up.
Canon EOS M6 Mark II Camera 15-45mm Lens: amzn.to/3DNnn83
VideoMicro Rode Compact On-Camera Microphone: amzn.to/3QkUBnK
Camera Tripod Vanguard Alta Pro 2: amzn.to/3yB8hP5
The Brand of the Drill bits, and cutting/flap discs, is "Alpha" If you can't get them at your local hardware shop, here is a link to Alpha Tools: alphatools.com.au
As an Amazon Associate, I earn from qualifying purchases. This means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make more videos like this one. Thank you very much for your support!
►►Subscribe to our Channel for more videos ►► bit.ly/2ULxLJogavinclark
Always use all the correct safety gear, and use your tools safely, I am not a good role model for this.
Hope you found something of use in my video or at least found it entertaining.
Gavin Clark DIY - Развлечения
Восхитительный результат ! Но через неделю всё покроется ржавчиной...
Большое спасибо, я рада, что вам понравилось. Я часто использую Penetrol Rust Treatment Penetrates Rust 300g Aerosol Spray, а затем наношу два верхних слоя полуглянцевого прозрачного покрытия. Это то, что я использовал в надписи на арматуре на задней части моего верстака, вот ссылка на это видео. ruclips.net/video/JA-wk62Zghk/видео.html Я стараюсь не комментировать отделку, Как в каком климате вы находитесь, внутри-снаружи, много дождя, гололед, вы хотите долговременно и редко трогать, или воск с протиранием каждый год. Вот почему у меня нет мнения. Пожалуйста, спросите кого-нибудь в вашем районе, что вам следует использовать, я чувствую, что это лучший способ узнать, что будет лучше для вас. Спасибо за ваш комментарий.
Waow SUPER KREATIF,, sangat luar biasa,,, Mantap,,, selalu berkarya,,, sukses selalu GBU
Salam dari Holland
Terima kasih banyak, saya senang Anda menyukainya. Salam dari Australia.
Вы настоящий мастер! Я тоже себе по вашему образцу сделал полачку. Супруге очень понравилось. Спосибо вам. Подписался на ваш канал😊.
Спасибо большое, я рада, что вам понравилось, ценю ваш комментарий. Желаю вам всего наилучшего в ваших будущих проектах.
Керемет Гажап жебер 👍👍👍✊✊💯
Чоң рахмат, сизге жакканына кубанычтамын.
Hermosa obra de arte..!!! Felicitaciones..!!!!
Muchas gracias, me alegro que les haya gustado.
Hola Galvin buenas tardes por aquí 🇦🇷, me alegro ver sus vídeos nuevamente después de bastante tiempo, muy buen consejo, excelente trabajo artesanal cómo siempre... muchas gracias por subir el video, mis saludos atentamente desde la Patagonia norte Argentina 🇦🇷💪🏻
Muchas gracias, agradezco tu comentario. He tenido algunas cosas que hacer últimamente, así que no pude hacer un video. Saludos desde Australia.
Как всегда, отличная работа! Спасибо!)
Большое спасибо, я рада, что вам понравилось.
Parabéns, você é um ótimo profissional.
Muito obrigado, agradeço seu comentário.
Another brilliant no nonsense, easy to follow video and a great coat rack.
Thank you very much, I appreciate your comment.
Hi,
You always have a really cool idea.
Many thanks for this tutorial.
Thank you very much, I appreciate your comment.
Как и всегда на высоте!!!!Очень интересная идея!!!👍👍👍
Большое спасибо, я рада, что вам понравилось.
Really like your rebar ideas! We recently built a new garage to house my car collection, and plan to build most of the shop cabinet door hardware, man door hardware/latches, display hangers, and coat hooks using your style of ironwork (will not do exact copies, these are uniquely yours). Additionally we have nickel plated some of our creations, and also used some brass, bronze, or copper fitting like the mounting screws for example. Gun blueing fluid makes a great finish if you want something darker, and for exterior use we plan to just let them rust, and maybe clear coat in the future! You have been an amazing inspiration of ideas, keep it up, thanks!
Thank you very much Bert, you copy whatever you like I am glad I could give you some ideas, your garage is going to look great. Thank you for your comment I wish you the best.
Just a Wonderfully. EXCELLENT. THANKS FOR YOUR.
Thank you very much, I am happy you liked it.
Heavy duty .love it .got to make 1 or 2
Thank you very much, I am glad you liked it.
Браво майсторе както винаги оригинален и собствен почерк на продукта!
Благодаря ви много, радвам се, че ви хареса.
Really liking the industrial look thanks Gavin great content as always.
Thank you very much, I appreciate your comment.
Hi Gavin its Dean, the guy who asked if I could make the beltbuckle hook for my daughters new house. I just wanted to tell you it was a complete surprise, and her and her husband went nuts over it. Thank you for allowing me to copy your work. it is truly the coolest stuff.you are very creative. Thank you. If you really want I can send you a picture of it. Cheers.
Thank you very much. No problem, I am so happy they loved what you made, when someone you know makes you something it means far more than any bought item you could have given them, it is a real gift. I would love to see it, my email is in the top menu on my channel, click "ABOUT" it's over the right-hand side, them down the bottom of the dropdown, click business enquires, I am looking forward to seeing it. Thank you Dean
Hi from Argentina!! Thanks for your videos!!!
Thank you very much, I am happy that you liked them. Greetings from Australia.
Top notch - great looking piece - thank you
Thank you very much Ken, I am glad you liked it.
Great video tutorial as usual..Thank you..
Thank you very much, I am glad you liked it.
🇧🇷 Mestre do Vergalhão 👍👏👏👏👏
Muito obrigado Calango, agradeço seu comentário.
Excelente como siempre, saludos Gavin.
Muchas gracias, agradezco tu comentario.
I'm from Saudi Arabia... You are a professional artist in metal shaping... I will try to imitate your works
Thank you very much, I am happy that you liked it and wish you the best for your projects. Greetings from Australia.
Fantastic absolutely beautiful thanks again 👍
Thank you very much, I appreciate your comment.
Отлично! Мне очень понравилось. Спасибо за идею
Большое спасибо, я рада, что вам понравилось.
I love your creativity and the different methods you are using to handle with the metal thank you very much
Thank you very much, I am glad you liked it. I appreciate your comment.
Awesome!! You gave me some ideas on minimum welding tricks!! love the counter sink trick.. Bravo!!
Thank you very much, I am glad you liked it, I wish you the best for your projects.
Отличная работа,как всегда 👍💪🔥🔥
Большое спасибо, я рада, что вам понравилось.
Beautiful piece of craftsmanship Gavin! So clean and precise
done, nice video!
Thank you very much, I appreciate your comment.
Parabéns Gavin. Novamente somos surpreendidos com um belo trabalho. Saudações aqui do Brasil.
Muito obrigado, fico feliz que tenha gostado. Eu aprecio seu comentário. Saudações da Austrália.
Ficou lindo, parabéns.
Muito obrigado, fico feliz que tenha gostado.
Muy lindo Gavin, me gustó mucho. Saludos cordiales.
Muchas gracias, agradezco tu comentario. Saludos desde Australia.
Merci pour ton très bon travail 👍👍👍
Merci beaucoup, je suis heureux que cela vous ait plu.
Thanks Gavin you give me a lot of good ideas your doing great
Thank you very much, I wish you the best for your projects
Great idea for all your homemade tool.
Thank you very much, I am glad you liked it. On your channel that "DIY Metal Lathe Cross Slider and Compound Slider" you made the video of is an awesome unit.
Eso es un trabajo bien hecho. Exelente
Muchas gracias, estoy feliz de que te haya gustado.
Excelente trabajo de nuevo Gavin, el mejor de los éxitos en tus siguientes proyectos, estamos atentos 👍👏
Muchas gracias, estoy feliz de que te gusten los proyectos que hago, tengo muchas más ideas. Saludos desde Australia.
Me encanta ver sus trabajos, enhorabuena, un saludo desde España
Muchas gracias, me alegro que te guste, agradezco mucho tu comentario.
Belle réalisation. Merci pour cette vidéo très détaillée .
Merci beaucoup, je suis heureux que cela vous ait plu.
Beautyful piece.
Thank you very much, I am glad you liked it.
Lovely
What I saw today is amazing. I wish you more success
Thank you very much, I am glad you liked it, and I appreciate your comment.
молодец)))) спасибо вам за творчество ))
Большое спасибо, я рада, что вам понравилось.
That's the good thing about living in a country where there is access to good tools to be able to do good projects, here in my country there are only poor quality imitations, I liked your project very good.
Thank you very much, I am happy that you liked it. Yes, I am very lucky to live where I do and have access to these things. Greetings from Australia.
Gorgeous!!!
Thank you very much, I am glad you liked it.
Как всегда всё супер!!!👍👍👍
Большое спасибо, я ценю ваш комментарий.
You are an amazing craftsman.
Thank you very much, I appreciate your comment.
I love what you do everything you make is beautiful and strong you have a good imagination and talent I love your video
Thank you very much D R, I appreciate your comment.
Great coat rack Gavin, this would look good on any wall in the shop or house. Take care.
Thank you very much Steve, I appreciate your comment.
Всё супер. Классно, попробую повторить.
Большое спасибо, я желаю вам всего наилучшего в вашем проекте.
Как всегда отлично👍👍👍 Хочу дать вам идею. Я себе уже сделал. Попробуйте сделать из арматуры чесалку для спины. Очень мужская вещь получилась.
Хых!Красавец!Хорошая идея.Жаль,на работе арматура только 12 и выше...Больно суровая чесалка выйдет.Челябинская.Хотя...А почему бы и да.
Большое спасибо, я рада, что вам понравилось. Что такое «гребешок для спины», если у вас чешется спина и он имеет форму небольшого гребешка? Спасибо
Best job mr gavin 🙏💪💪💪
Thank you very much.
j'aime beaucoup ce que vous faites !!😃👍👍
Merci beaucoup, j'apprécie votre commentaire.
Excelente trabajo
Muchas gracias, me alegra que te haya gustado.
Excelente trabajo 👍👌
Muchísimas gracias.
This is one of the nice piece I love it
Thank you very much, I appreciate your comment.
The most murderous coat rack I have ever seen sure to last forever 👍 nice work
Thank you very much, I am glad you liked it.
Belo trabalho, parabéns.
Impressive! Regards from Argentina!
Thank you very much, I am happy that you liked it. Greetings from Australia.
Great work Gavin!!
Thank you very much Earl.
Your style is truly unique and excellent. Outstanding video quality. Top notch.
Thank you very much, I appreciate your comment.
The man the legend!!! Again another Great idea!
Thank you very much, I appreciate your comment.
Beautiful 😊
Thank you very much, I am happy that you liked it.
Brilliant job Gav 🔨👍😊
Thanks mate, glad you liked it.
great job, thanks for share it
Thank you very much, I am happy that you liked it.
Muy creativo amigo 👍 🇺🇾
Muchas gracias, estoy feliz de que te haya gustado.
Hello Gavin toujours top et magnifique avec un très beau rendu bravo bye bye de France
Merci beaucoup, j'apprécie votre commentaire. Salutations d'Australie.
как всегда-очень круто!!!
Большое спасибо, я рада, что вам понравилось.
I love it. Nice work
Thank you very much.
Very cool!
Thank you very much.
Thanks for another great build and design. I'm impressed with your cutting disc skills when making the flat spots on the rebar. I would have cut too deep.
Thank you very much, I appreciate your comment.
Great work again Gavin, very nice mate.
Thank you very much Matt, I am glad you liked it.
Awesome work . Yet again 👍👌
Thank you very much, I am glad you liked it.
Good Job Saludos desde mexicali bc México
Muchas gracias, estoy feliz de que te haya gustado. Saludos desde Australia.
COOL!
Thank you very much.
Ciao bellissimo attaccapanni bravo realizzato in maniera impeccabile complimenti!!!👍🏼👍🏼👍🏼
Grazie mille, sono felice che ti sia piaciuto.
Muito bom, vou fazer essa,,,
Muito obrigado, desejo o melhor para o seu projeto.
Excelente
You are a master
Thank you very much, I am glad you liked it.
Another great project! When is Alpha coming out with a “Gavin Clark Edition” rebar bender? Ha! I bet you’d still prefer your pipes! Any new rebar knots planned?
Thank you very much Tom, Alpha gear is great but I do love my two pipes for bending, Hahaha. I do have knots on my list to do, I should pull my finger out and have a play and see if they can be done. thank you for your comment Tom.
Yeahhhh, I wanna see rebar bending Gavin Clark - but bet they won’t do as good a’job!
@@yorkshirejoinery2869 Hey Al I hope everything is going well with you Mate 🥃 👍 😊
🇧🇷🇧🇷🇧🇷 fantástico 👏👏👏🙏🏼
Muito obrigado, fico feliz que tenha gostado.
good one Gav
Thanks Paul.
Ata boy Gavin. Great job as usual! Cheers
Thank you very much Dean.
You had me hooked from the start Gav. Great video as always mate. Cheers
Thank you very much Samuel, I am glad you liked it.
Nice one Gavin.
Thank you very much.
Top demais
That’s awesome I’ve got a a bunch of naiwawlls that’s piney vernacular like I said you piney
Hi John I think I would fit right in in Jersey pines, looks great in google.
U r jst great man
Thank you very much.
another great vid Gav
Thanks Dmac, I see you have been catching some nice red fin fish lately on the videos on your channel, wishing you the best mate.
@@GavinClarkdiy thanks mate
God Job sir
Thank you very much.
Good luck master 💎
Thank you very much.
Nice work👌
Thank you so much 😀
Крючки тоже можно было сделать из арматуры, не обычно получилось бы. Но видос все равно огонь! 👍
Большое спасибо, я рада, что вам понравилось. Да, я согласен, что крючки могут быть сделаны из арматуры, я сделаю это в более позднем видео. Именно тогда, когда я увидел крючки, которые я использовал в этой стойке, у меня появилась идея для видео. Спасибо за ваш комментарий и предложение.
Master
Thank you very much, I am happy that you liked it.
Maaaate these are getting better and better 😲👌👍🍻
Thanks Mate, I appreciate your comment.
Good 👍👍👍
Thank you very much.
👏👏👏👏good
Thank you very much.
Muy lindo trabajo
Mucha prolijidad
Quisiera saber qué le pasan para que no se oxide el metal gracias
👍👍👍👍👍
Muchísimas gracias. A menudo uso Penetrol Rust Treatment Penetrates Rust 300g Aerosol Spray, y luego aplico dos capas de acabado de Semi-Gloss Clear Coat. Eso es lo que usé en las letras de las barras de refuerzo en la parte posterior de mi mesa de trabajo, aquí está el enlace a ese video. ruclips.net/video/JA-wk62Zghk/видео.html Trato de no comentar sobre acabados, según el clima en el que te encuentres, si es de adentro hacia afuera, mucha lluvia, hielo, quieres mucho tiempo y pocas veces toques, o una cera con una toallita cada año. Es por eso que no tengo una opinión. Pregúntele a alguien en su área qué debe usar, creo que esta es una mejor manera de averiguar qué sería mejor para usted. Gracias por tu comentario.
Maravilhoso esse suporte.....twm algum modelo usando derradura de cavalo ??
Muito obrigado, fico feliz que tenha gostado. Não, eu não fiz nada com ferraduras.
Olá 😎🙏👍 ótimo
Wonderful job. What type of varnish or protection do you use on your jobs to protect them from rust?
Thank you very much. I often use Penetrol Rust Treatment Penetrates Rust 300g Aerosol Spray, and then put two topcoats of Semi-Gloss Clear Coat. That is what I used on the rebar lettering on the back of my workbench, here is the link to that video. ruclips.net/video/JA-wk62Zghk/видео.html I try not to comment on finishes, As what climate you are in, is it inside-outside, lots of rain, ice, do you want long term and rarely touch, or a wax with a wipe over every year. That is why I have no opinion, Please ask someone in your area what you should use, I feel this is a better way to find out what would be best for you. Thank you for your comment.