WOW! This car turned out so dang cool in the end. that 2 seconds shaved off the stock pull in a quarter is HUGE! Everyone in lower DAs is going to see amazing times on that ethanol tune, can't wait!
A lot of these parts are currently in pre-rudction and coming soon. This series is a big teaser, but we will do a post on all the parts once they are all on the market for sure.
Anyway too make a pop tune for this platform instead of the burbles ?? Stage 2 right now would love too get some more aggressive pops, and super excited to see what e85 does!!
Check out the B9 2.0T Tuning product page on our website, we added power figures and dyno graphs for TrueFlex. performancebyie.com/collections/ecu-software-tunes/products/ie-audi-b9-a4-a5-performance-ecu-tune
No worries, we're filming the inside scenes with a full size camera on 3 suction cups and a 3rd holding an audio collector all to the inside of the windshield. What you're actually hearing is the audio recording the vibration of that rig setup coming through. We will figure a cleaner audio solution on the next series. ✌️
It will at a later date. We are still working on support for the B9.5 models due to changes within the ECU impacting flashing protocols. But we are working on it and will have support as soon as we can.
I just saw I responded to your other comment, but we haven't seen any transmission issues with this DSG, we've pushed them up to 378HP and 456 FT-LBS with our Trueflex file.
There are some 2024 models that we can tune currently and some that we cannot for the S4/S5's. If you contact us via email, our support team can assist you in finding out if we can tune yours.
when are these build parts gonna show up on the website? 3m tape holding on lip spoilers always gives me the heebeegeebeez...no confidence what so ever.
ECS Tuning did a good job on a quality spec adhesive (many factory parts are held on the same way). We have full confidence these body upgrades will stay put. All the iE parts teased in this series will be coming out periodically, starting with the TrueFlex tune and sensor harness kit in the next couple weeks.
The front lip does have some screws to help hold it on. I will say I have no idea where they got that double sided tape but it is some very sticky stuff. I don’t have any worry of those things coming off the car.
Please, in the future try to start tuning cars for fully built Customers with fully built cars, please lots of potential still left in the car that’s untapped.
WOW! This car turned out so dang cool in the end. that 2 seconds shaved off the stock pull in a quarter is HUGE! Everyone in lower DAs is going to see amazing times on that ethanol tune, can't wait!
Glad you enjoyed it! Yes, in better conditions those before/after numbers are only going to get more dramatic, B9 A4 owners are going to LOVE it.
@@IEtunedwhen are you going to post the hp figures on the website
When does the HPFP and flex fuel kit hit the site?
@@k5warrior115 When the tune and supporting hardware drops, in the next few weeks.
@@Kevin_Morales 1-3 weeks from now. :)
Great series guys! Looking forward to seeing more content like this in the future!
We loved doing this! Definitely more like this to come in the future.
Ok that sounds pretty good, well done guys.
Our engineering team has spent countles shours working on an exhaust design that cancels out the B9 A4/A5 weird RPM rasp. It turned out amazing.
you guys did good D looks good man
We agree, the car turned out, dare we say... perfect?
You guys have a blog post with parts list for this build? This thing came out dope!
A lot of these parts are currently in pre-rudction and coming soon. This series is a big teaser, but we will do a post on all the parts once they are all on the market for sure.
Anyway too make a pop tune for this platform instead of the burbles ?? Stage 2 right now would love too get some more aggressive pops, and super excited to see what e85 does!!
E85 is going to be a lot of fun!!
interesting😀
Any update on when new parts and tunes will be released? Super excited, can't wait to sell my liver for more power :)
Many new B9 parts coming soon!
Great work, exterior looks awesome. What size wheels and were spacers needed?
19x8.5 ET35, no spacers needed!
🙏🏼
can you give a rough estimate on the power on this build?
Check out the B9 2.0T Tuning product page on our website, we added power figures and dyno graphs for TrueFlex.
performancebyie.com/collections/ecu-software-tunes/products/ie-audi-b9-a4-a5-performance-ecu-tune
Any comparison of the sway bars versus stock?
We will have the data posted when they hit the website. Stay tuned!
When will the ethanol tune and parts be dropped?
Keep an eye out on our social channels in the next 1-3 weeks. ;)
Did you investigate that rattle over bumps? It’s been there since the stock test video
No worries, we're filming the inside scenes with a full size camera on 3 suction cups and a 3rd holding an audio collector all to the inside of the windshield. What you're actually hearing is the audio recording the vibration of that rig setup coming through. We will figure a cleaner audio solution on the next series. ✌️
Will this all be applicable to 9.5? Just seems like the platform is left out 😭
It will at a later date. We are still working on support for the B9.5 models due to changes within the ECU impacting flashing protocols. But we are working on it and will have support as soon as we can.
Keep us posted on the b9.5! Cant wait for the future@@IEtuned
Hi IE, i thought the transmission in the b9 can only handle around 250hp? Whats going on lol
I just saw I responded to your other comment, but we haven't seen any transmission issues with this DSG, we've pushed them up to 378HP and 456 FT-LBS with our Trueflex file.
@IEtuned well shit IE when are those parts coming out?! You got me moist 😏
i have a 2024 audi s5 can i stage 2 that?
There are some 2024 models that we can tune currently and some that we cannot for the S4/S5's. If you contact us via email, our support team can assist you in finding out if we can tune yours.
Wheel and tire specs?
We did 19x8.5 et 35 235/35R19 no spacers although I probably will add some spacers in the future.
when are these build parts gonna show up on the website? 3m tape holding on lip spoilers always gives me the heebeegeebeez...no confidence what so ever.
ECS Tuning did a good job on a quality spec adhesive (many factory parts are held on the same way). We have full confidence these body upgrades will stay put.
All the iE parts teased in this series will be coming out periodically, starting with the TrueFlex tune and sensor harness kit in the next couple weeks.
The front lip does have some screws to help hold it on. I will say I have no idea where they got that double sided tape but it is some very sticky stuff. I don’t have any worry of those things coming off the car.
Please, in the future try to start tuning cars for fully built
Customers with fully built cars, please lots of potential still left in the car that’s untapped.
We have much planned for the B9 2.0T platform, this is far from the end of our develop-ment for the MLB engine.