I obtained donor eis add key password, I ran erase procedure on donor eis BUT the erase procedure did not both disactivate and depersonalize, the erase procedure only disactivated. The donor eis shows to still be personalized. Now what? Do I go ahead with writing original broken vehicle eis with key password to donor eis or do I write original donor eis read/backup and run the erase procedure again to hopefully get both activate and personalization to show no?
I’ve got a solution, $30k, nastf and you can program the keys after you buy them from the dealer. Been reading some Abrites stuff and starting to get into fbs4 but it’s more so for modules to be reused, etc even though they say you can’t.
hi there , at 15:02 , you put a new 16 digits key password different than the password you pulled it out from the key at minute 10:39 , can you tell me how you got this number ? and where you got it from ? thank you
Hey Brother, you can go to auteltech.coza . Follow the instruction and book the diagnostic tool consultation service. After you book I will call you up and align you with a unique package based on the problems I see.
Hello, The vehicle is an FBS3. I actually made a mistake when identifying the vehicle as its not a 2014 as listed on my title and presentation. I was an error on my part
@@AutelConsultancy damn sorry u can’t change it hope people don’t start thinking we can do fbs4 with aftermarket tools also u should of used the preface lift e class as all facelift ones are fbs4
@@DavidPetrisor Im sure there might be some people who find out the hard way if they didn't pay attention the vehicle selection I did ( and if they didn't read the comments section) . But if they watch my videos I always preach to check by VIN if the function is there on the tool before you commit. I got alot of comments of people who watched a you tube procedure, then when they bought a tool only to find out the the function isn't their for the VIN they are working on. Hopefully the audience learns the procedure versus the error
IM508: $1,417.05 XP400: $838.89 G-Box3: $158.71 APB102: $44.50 We're already past $2000 and we haven't even talked parts yet. This is not practical at all, we need a solution that does not require selling off your firstborn child to afford the tools.
Your kit is still missing some items. If your focus is on the lowest price you should consider a different company. This tool isnt cheap and its not for everyone.
This guy is really knowledgeable!! Has anyone retained him as a consultant and paid the $200 fee??
I obtained donor eis add key password, I ran erase procedure on donor eis BUT the erase procedure did not both disactivate and depersonalize, the erase procedure only disactivated. The donor eis shows to still be personalized. Now what? Do I go ahead with writing original broken vehicle eis with key password to donor eis or do I write original donor eis read/backup and run the erase procedure again to hopefully get both activate and personalization to show no?
Hello, good luck. Is there a solution to program a second key for Mercedes-Benz FBS 4?
Honestly I have never found an solution for this.
I’ve got a solution, $30k, nastf and you can program the keys after you buy them from the dealer.
Been reading some Abrites stuff and starting to get into fbs4 but it’s more so for modules to be reused, etc even though they say you can’t.
Hello. Great job there. I have FBS4 TCM which is brand new. Is it possible for me to code it to the car with im508??
Your going to need the correct tool strategy to do this procedure.
Well done
hi there , at 15:02 , you put a new 16 digits key password different than the password you pulled it out from the key at minute 10:39 , can you tell me how you got this number ? and where you got it from ? thank you
That's what I'm confused about
Impressive
Good day , I'm from Nigeria, I want to buy autel im608 pro from you
Hey Brother, you can go to auteltech.coza . Follow the instruction and book the diagnostic tool consultation service. After you book I will call you up and align you with a unique package based on the problems I see.
Does this MB was with FBS4 system or FBS3? Thanks! Because some manipulations can be done only with ABRITRES so far, of course if system is FBS4.
Hello, The vehicle is an FBS3. I actually made a mistake when identifying the vehicle as its not a 2014 as listed on my title and presentation. I was an error on my part
@@AutelConsultancy Its not big problem :) just asking for assurance :) great video, thank you! :)
There are a few 2014 with old system@@AutelConsultancy
@@AutelConsultancySalut merci pour la vidéo je peux avoir ton adresse mail
@@mamoudousawadogo8029 Hello , I work by appointment only. Whats the problem your having?
Good morning I would like to get in touch with you. My phone with all my contacts was destroyed.
Ill send you an email
The facelift e350 is a fbs4 system how can u virgin and adapt a fbs4 system
This isn’t possible on a 2014 only 2013 and older so u should fix ur title people will think u can do this to the fbs4 system which u can’t
@@DavidPetrisor Hey Dave. You are correct this is an error on my part. I cant change the video unfortunately.
@@AutelConsultancy damn sorry u can’t change it hope people don’t start thinking we can do fbs4 with aftermarket tools also u should of used the preface lift e class as all facelift ones are fbs4
@@DavidPetrisor Im sure there might be some people who find out the hard way if they didn't pay attention the vehicle selection I did ( and if they didn't read the comments section)
. But if they watch my videos I always preach to check by VIN if the function is there on the tool before you commit. I got alot of comments of people who watched a you tube procedure, then when they bought a tool only to find out the the function isn't their for the VIN they are working on. Hopefully the audience learns the procedure versus the error
That is fbs4 2014 year w212 . You choose car 2010-2013. But your car 2014
His car cant be 2014 its a mistake has to be 2013 or under
Bro before we start our lesson lets go to the gym😂😂😂
That is a fbs4
All W212 in 2014 year is FBS4 !!!!!! Change the name video
Hi said the car 2014. But choose 2010-2013😂
Aligned or sold him the correct tool… 🤔
I did both. He got tired of buying the wrong tools and he also realized the vendors who him the tools didnt offer any training for his problem.
The car is not a 2014
Everyone there is an issue with the title this is 2013. We all know this isn't possible in 2014 as it uses the newer security. Let's move past that!!!
IM508: $1,417.05
XP400: $838.89
G-Box3: $158.71
APB102: $44.50
We're already past $2000 and we haven't even talked parts yet. This is not practical at all, we need a solution that does not require selling off your firstborn child to afford the tools.
Your kit is still missing some items. If your focus is on the lowest price you should consider a different company. This tool isnt cheap and its not for everyone.
Who are using a 2012 information
Yes its is a mistake on my part. My subscribers notified me in the comment section when I published the video
😂
Bro that's a very very misleading video