Thank you! Your video helped me. I've used SKF 608 2RSH C3 bearings instead. I had to use striker and hammer to remove bearings because they didn't go freely as yours. I also used bearing press tool and old bearing instead of piece of wood and hammer to install new bearings.
At 2.08 before using the hammer heat the case leave to cool , then spray WD40 to soak in for an hour and then use hammer. The reason is that the bearings can jam in the case leaving them in while the shaft alone comes out, soheating will expand and contract the metal and WD40 will help loosen the bearing
I over heated my barings by turning weat to flower. Because there is no wetness to cool things off. But id do it again because it took lots of times anyways and it's easy to buy and put in new barrings : )
That is called the "O ring". It is used to create a watertight seal. Google it to check online or you can find it at your local hardware shop. Here is the link for any spare parts: blendermart.com/ocart/index.php?route=product/product&product_id=51
I was hoping this would help me, but when both of your bearings just hopped out with the rotating pin I realised this wasn’t going to help me😅 both my bearings are stuck inside. I have now used some 5-56 on the bearings. Going to slam the pin back in and then out again. Hopefully the bearings will join. Otherwise a nice video!
Morate zamijeniti semering pa tek lezaje.Ako ostavite stari semering vodace za par dana proci kroz lezaji,i niste nista uradili.Znaci kad skidate lezaje ide sve u kompletu ali prvo semering..👍👍
Thank you! Your video helped me. I've used SKF 608 2RSH C3 bearings instead. I had to use striker and hammer to remove bearings because they didn't go freely as yours. I also used bearing press tool and old bearing instead of piece of wood and hammer to install new bearings.
I dont have a mini press or a vice grip. Seeing your method helped me.
The bearings are 608zz, am I right?
Very very helpful video
Thank mate
Keep it up 👍
Thank you lot.. love from India
At 2.08 before using the hammer heat the case leave to cool , then spray WD40 to soak in for an hour and then use hammer. The reason is that the bearings can jam in the case leaving them in while the shaft alone comes out, soheating will expand and contract the metal and WD40 will help loosen the bearing
what size is the container bearing?
22 mm..
Here is a more detail link : blendermart.com/ocart/index.php?route=product/product&product_id=51
Ya kha mila ga
I over heated my barings by turning weat to flower. Because there is no wetness to cool things off. But id do it again because it took lots of times anyways and it's easy to buy and put in new barrings : )
what size of bearing?
22*8*7
muchas gracias amigo, muy buen video, ahora podré cambiar los baleros de mis aspas, saludos desde Cancun
san po makabili bering
Ye base wala ring kaha milega
Como retirar a este do rolamento
Wonderful instruction.
اين يوجد قطع الغيار بالدار البيضاء
From where I can get this ring which you open in the beginning what it is called my jar ring is free please help
That is called the "O ring". It is used to create a watertight seal. Google it to check online or you can find it at your local hardware shop. Here is the link for any spare parts: blendermart.com/ocart/index.php?route=product/product&product_id=51
This was exactly what happened to my blender and the technician told me that I would have to buy another blades
I can't get both bearings out...
I was hoping this would help me, but when both of your bearings just hopped out with the rotating pin I realised this wasn’t going to help me😅 both my bearings are stuck inside. I have now used some 5-56 on the bearings. Going to slam the pin back in and then out again. Hopefully the bearings will join. Otherwise a nice video!
Saan po nakakabili ng bearing nyan thank you po 😊
ser saan makabili ng machine blender bearing sa akin sira na.
Thank you!
Morate zamijeniti semering pa tek lezaje.Ako ostavite stari semering vodace za par dana proci kroz lezaji,i niste nista uradili.Znaci kad skidate lezaje ide sve u kompletu ali prvo semering..👍👍
بلعراق قيمته عشر الاف كامله لان ماعدنه بوشه لاكن انته مضبوط
thank you
عدي خلاط ينضح ماي نفس هذا الصلحته
Mal muy mal! no cambio el retenedor ! El eje No se golpea directo!
podrías explicar en un video cual es la forma correcta por favor?
DON'T BUY those cheapie things off of Flea bay!, We got one I think I used it maybe 3 times....Locked up like a bank on Labor day😡😡 Total JUNK!.
Kode bearing
Thank you