Fixing Problems With Slots and Tabs
HTML-код
- Опубликовано: 2 авг 2024
- 👉👉👉Click on Show More for video mentions and special links!👈👈👈
👉👉👉
Ever tried resizing slots and tabs only to find out too many pieces are moving. Or the wrong pieces are moving. This video show me fixing problems with slots and tabs in one of my very own files. The more I work with Lightburn the more I learn and share the knowledge with you.
================================
Video Mentions:
hobowithwood.com
patreon.com/hobowithwood
===================================
Use the link below to get your Monport CO2 and save an additional 10%.
Monport Lasers:
hobowithwood.com/monport
Use Coupon code:
👉 Hobo10 👈
For a 10% discount on all lasers!
===================================
COOL LINKS:
Any level of support would be greatly appreciated.
Monthly Options
/ hobowithwood
One Time Donations
www.paypal.me/youtubehobo
Super Cool Workbench:
hobowithwood.com/VevorWorkbench
Stainless Steel Shelving Unit:
hobowithwood.com/VevorStainle...
This is a link to the Atomstack website:
hobowithwood.com/Atomstack
ATOMSTACK P9 M40 - A Great Small Laser!
hobowithwood.com/AtomstackP9
Comgrow Comgo Z1 The Ultimate Package
hobowithwood.com/ComgrowZ1Ult...
Comgrow Desktop Laser Engraver Enclosure
hobowithwood.com/ComgrowDeskt...
Perfect paper for cutting with your laser.
Hammermill Cardstock, Premium Color Copy, 32 lb, 11" x 17"-1 Pack (250 Sheets) - 100 Bright, Made in the USA Card Stock, 120024R
hobowithwood.com/80lbCardstock
Clock Mechanism link
hobowithwood.com/ClockMech
2.5" Dice Blanks
hobowithwood.com/diceblanks
Baltic Birch Plywood, 3 mm 12" x 12"
hobowithwood.com/3mmBalticBirch
1/16" Basswood 12" x 12"
hobowithwood.com/ThinBasswood
===================================
Some of these links are affiliate links, but will not cost you a penny more!
Using them helps to support the channel!
#lightburn #lightburn software #hobo with wood #laser engraver
Excellent! I didn't know about putting nodes in the middle so they don't change size. Now, when you want to cut one or many shapes without leaving the shapes open, you must change the mode of the layer from "line" to "fill", then make the cut and finally change back to line mode.
Steve, I would like to say first, thanks for your videos, and second, You look so much younger with your new haircut.
Thanks! 😃
Thank you, Hobo. Have a biscuit.
Breakfast in the morning! Yippee! Thank you.
👍👌
I love this project. Saw the first video and was very sad I couldn't find the file when it was offered for n/c. Can I adjust slots and tabs in Corel 2024?
The file is available on my website. hobowithwood.com/product/nightstand-bookmark/ IF it was offered for n/c at one time, it was most likely for a short period of time after it was released. I will do this sometimes with a new file. I haven't used any Corel products since CorelDRAW in the 90's. Not familiar with any of Corel's capabilities.
Great video but I still can't get the resize slots in selection tool to work. when I pick Slot depth ,slot width, or tab height I never get the blue line with the arrows showing what direction will be adjusted. Is there a setting in lightburn I need to switch on for this to work.
Nope. I'm sure it is something VERY simple you are missing. But if you are doing EVERYTHING I demonstrated AND still not seeing the slots, there are a couple of reasons that could happen. Please send the specific file or the single piece in a design you are having trouble with. I will look at it for the Gremlins and make a video showing you the problem and the fix. hobowithwood@gmail.com
Could it be. Only just a suggestion are you uncoupling before going to the node application. Only a thought
Sorry ungrouping I meant to say.
Last night I purchased your halloween lantern design, but after watching this video I still can't resize the tabs and slots. Any suggestions?
Glad we got the straightened out. So many people don't increase the tolerance in the resizing tool, it's not funny.