I have the exact same washer (WM3370hwa) that won't spin and gives the LE code. I have tried three new rotation sensors, the door lock, inspected the pump, tested wire harnesses for continuity and a few other tests as shown in the service manual. Still won't spin and gives the LE error. Board replacement next?
@@onlineappliancetech I checked the three terminals on the stator and all three combinations, 1-2, 2-3 and 3-1 had readings of 11.3 ohms, within the range of 5-15 ohms as shown in my SM. If there is a different test I am missing, I'd be keen to hear about it. Thanks.
@@gsd7065 did you check wiring harness from the main board to hall sensor? Sometimes they will be a cut wire, between MPC to hall sensor. I would check that before replacing MPC.. It is the 3 DC wires. Crazy over the last 250 washer with this LE code it's always be Hall Sensor.
Worked, tjank you. LG wanted $400.00 just to come out and look at it.
Thank you for your kind words! I'm happy I could help you avoid that hefty fee.
Hi, do they sell this hall sensor part at any stores? or special order
Thanks
Thank you for taking the time to comment! Your support means a lot to me!
I have the exact same washer (WM3370hwa) that won't spin and gives the LE code. I have tried three new rotation sensors, the door lock, inspected the pump, tested wire harnesses for continuity and a few other tests as shown in the service manual. Still won't spin and gives the LE error. Board replacement next?
Did you check the motor for continuity?
@@onlineappliancetech I checked the three terminals on the stator and all three combinations, 1-2, 2-3 and 3-1 had readings of 11.3 ohms, within the range of 5-15 ohms as shown in my SM. If there is a different test I am missing, I'd be keen to hear about it. Thanks.
@@gsd7065 did you check wiring harness from the main board to hall sensor? Sometimes they will be a cut wire, between MPC to hall sensor. I would check that before replacing MPC.. It is the 3 DC wires. Crazy over the last 250 washer with this LE code it's always be Hall Sensor.
And if everything fails it's the motor control board. that happened to me.
The 20kg LG wash and dry front loader don't use sensor so what can do
Hi is there a way you can bypass the sensor?
sorry they are not🙃