Видео

You are a gem and a lifesaver. I was feeling overwhelmed, thinking another issue and money I'd have to come up with. Being a widow of several years, I've had to figure everything out. You've made this task so simple. Worked perfectly. Thank you!

GFE28GSKKSS not cooling, changed the fan motor because I saw the ice build up. Tested the fan I took out and it worked but I put the new one in anyway. Didn’t work… freezer is fine. I’m stumped. If doesn’t seem to be running though. When I open the fridge door I can’t feel it. Even with the new fan. Any advice from anyone would be appreciated

I was able to get this working. However, it failed on me again after 6 months or so. Fixed is several times. Now the dryer is doing it! So frustrated!!

My model number is LMXS28626S/08 What is the assembly part number as you suggested Thank you

This worked perfectly and saved me such a headache! Thank you!!!

I change the solenoid and change the igniter and NOTHING HAPPENS

Damn that dryer is filthy 🙁

I'm buying a washer and dryier combo from someone buy they are having the same code problem for the dryier Can I get it home and replace this part and know that it works without the hose being hooked up.

Worked like a charm moms happy again😊

The beginning of the video as you’re turning it on you mention you’re listening for for a click and if that’s the case, it’s telling you it’s good so if we hear a click, I’m assuming it means good. ?

Hi this is Milano thank you for sharing this cool video. kind of gives me an idea of this could be the similar problem that I’m having at first our KitchenAid went out from the self cleaning mode. The door was locked. There was nothing on the panel. Everything was blank so I had replaced the thermal fuse with the clear Jacket behind the control panel I got the power and open the door. Everything seems to be working but not heating so this is something that looks like what’s going on my question. I have a similar if not the same unit here is my model number can you tell me if that’s the same process. KOSE507ESS02 KitchenAid wall oven not heating. Seems like it could be that thermal fuse your indicating but not sure if it’s the same location where it would be in. And the same process of removing please advise. Thank you.

It's often the filter and not the filter housing. that's the problem. They're very inconsistent about manufacturing the plastic tabs on the filters. The clear giveaway is I could get the oil filter, same model filter, back in many times without a problem. If it was the housing I wouldn't be able to consistently get it back in.

Do you have a link for the display panel too? I need both.

Mines a WT7300CW, I need the hole top half…

I couldn't figure it out, got tired of using a cooler. Called GE and they sent a Tech. The main board was bad.

I watched many tuto on replacing this part and yours is by far, the best. Thank you . We can SEE what you are doing, with tips and tricks on how to reinstall that ring. Again thanks.

Mr. Online Appliance Tech: Your video was perfect. You saved me HUNDREDS of dollars. Easy to understand instructions. Very detailed. Great close-ups. THANK YOU SO MUCH!!

Hell ya 🎉. This saved me so much time and money. The washer lid broke, I replaced the whole door. I still didnt work. I noticed the latch was broken on the new lid. Luckily the old lid latch was still good. I knew I was gonna break this thing if I didn’t look it up. Thanks a bunch.

Great video and tutorial! You saved me hundreds of dollars. Bought the new igniter and installed just as you said. Works great!

I have this washing machine. Tonight it started making some noise withing 5 minutes of washing and now the sensing, done and lock lights keep flashing at the same time and then the done light flashes right after. Do you know what code this is? I'm been trying to figure out what caused this and how to fix it. Any help would be appreciated. Thank you.

THANK YOU SO MUCH! Your video instructions were so clear and perfectly paced! This is the first time I repaired an appliance!

Our freezer and convertible drawer are both malfunctioning, our fridge is only 2.5 years old, but both drawers are not getting as cold as they are supposed to be (also means no ice). Is there a common problem here since a lot of these comments have similar issues? Of course it only has a 1 year warranty and it would take GE a month or more to get to us. We've been having the issues for a couple of months and just dealing with not being able to use it but tonight it started getting really loud too. F0200 F0304 F0313 F0202 We've pulled it out and cleaned it good, unplugged it for a few days to let it fully "defrost" but there was very little water honestly. I don't see any ice buildup anywhere in the coil/ near the condenser. Just trying to figure out what to try next.

GE PVD28BYNFS- Mine is saying NC on the door and when you pull out the freeer drawer the temp just blinks.....you can do anything on the door or drawer controls. Where would you start? I checked board on top of freezer door.....no wire broken or singed. Not sure where to go from here

Any idea where to get the boot or gasket replacement for the fan ? Having a hard time finding it

what if the pump is good? i can hear and feel the pump going…

My dryer drum isn’t moving very easily after installing a new pulley and belt. Suggestions? Maybe my belt is too tight or the wrong size?

This worked for me 👍🏻

Excellent video and presentation… You were exact with your instructions, provided insightful tips and very professional throughout the entire video… keep up the great work!!

Thank you bud. A coin got into one of the plastic paddles!! Banging around every rotation. Had to open it up as far as the top piece then 2 screws to get off the paddle. Im 25c richer 😂. But more importantly not a single scratch broken clip during the process thanks to your vid.

Helped me a lot

I found the 2 pins going to the ice maker's heating element temp sensor badly corroded. Clean up the best I could, still got temp sensor faults and no ice. Sensor is out at 28k ohms when bench testing at room temp. Seems wrong, but I don't know for sure. You have any specs for this by chance? Thanks!

Great and most helpful video. Thanks

Thanks so much for the video! Great information and saved me from thinking I had to pay someone or buy a new unit. Thanks so much for posting!!

Thank you for the video 👍

My display stopped displaying. Refrigerator is correct temp and freezer works. I don’t know what to do.

Great video! Thanks!

Thank you so much for your awesome video. Great easy fix. Saved me many dollars.

Great video! This helped me troubleshoot my exact fridge. Thank you for the detailed video and part number.

Can you run the service mode while the door is open? For example, I want to turn on the water for the ice maker and see what happens when the water comes on. Mine seems to be splashing when it comes on. Thanks.

I have a gfe28gskkss and when I tested it on 47 both numbers stood a left and right stood at 00 and the fridge started making noise in the fan area have any suggestions ?

i LOST THAT METAL CYLINDER BETWEEN THE THE COIL AND POST? WOULD YOU HAPPEN TO KNOW WHERE i COULD BUY ANOTHER? I HAVE LOOKED AND ASKED BUT cAN NOT FIND ON.

What size star bit did you use?

Does anyone know if it is possible to set hardware options through the screen or with a firmware update? I replaced the LED screen and the option to turn on/off the second ice maker is missing?

How do we know we have the right adapter for the valve connection at 6:16? As long as it is threading is it good or should we try to get exact measurements? I bought a kit but I’m confused about the pipe sizes.

Saved the day for me! Saved my wallet too!

Samsung support sucks. My washer was less than 2 yrs old and the drain pump went already. Ended up fixing it myself. It was actually not that hard, thanks to your video.

Fantastic video. For me, reattaching the belt was a little tricky, but I got it! Thank you so much for a great video.

Mine sounds squeaky also but I feel it's just a coin or something stuck behind the drum gasket? Any suggestions?

I have a Krsc700hps an on test 39, I do not received an output, only a blank screen all other tests pass. Any ideas?

Thanks for your video. I noticed that there was a difference on the plastic part under the agitator, there are holes on the new part that do not exist under the old agitator, which prevents dirt from accumulating between the top part and the bottom part, did you make a special order?