Building a Keezer
HTML-код
- Опубликовано: 7 сен 2024
- They say you haven't lived until you've served your own draft beer on tap in your personal boozer. For this you'll need a keezer and that's exactly what Ed and Andrew build in this video using an old chest freezer.
🍺 EQUIPMENT (from regulator to tap) 🍺
-Regulator
www.themaltmil...
-Beer Pipe 3/8"
a1barstuff.co....
-Manifolds
brewkegtap.co....
-Keg Quick Disconnects
amzn.eu/d/hOZNo0k
-John Guest Fittings for Keg Quick Disconnects
brewkegtap.co....
-John Guest Fittings for Pipe to Tap
brewkegtap.co....
-Beer Pipe 3/16"
a1barstuff.co....
-John Guest Fittings for Tap Shanks
brewkegtap.co....
-Tap Shanks
www.themaltmil...
-Taps
brew2bottle.co...
-Inkbird
www.brewbrossh...
Notes:
-we didn't use John Guest fittings to attach pipes to the manifolds, we soaked the ends in hot water to make them more malleable so they fit snugly over the barbs
-in the UK, the John Guest fittings were cheaper in bulk from tvsbeverage.ms...
-for our 8 tap setup we used 3/16" pipe x 15m and 3/8" x 12m
❄️ KEEZER MATERIALS ❄️
-old chest freezer
-CLS 4in x 2in (2 x 2.4m lengths)
-corner brace x 8
-screws
-Gripfill Solvent-free
-standard 15mm heating pipe insulation (which we will replace in due course)
-shortly after filming we added a couple of chains hooked on the wall to keep the gas cylinders upright
-a few tools (Ed and Andrew), some patience and beers
Been looking at making a little bar for the garden for socials, this video has given me so many ideas thank lads !
No problem, thanks for watching 🍺
Looks good nice days work cheers 👍🍻
Thanks mate, got there in the end! Working like a dream at the moment 🍺
Sick editing G!
Bang average bruv
sick editing G
Any plans to run a cold water recirc to combat fobbing as the beer in the line warms up?
Submersible pump in a bucket of water in the fridge looked through the insulation should be enough to stop it. I suspect without constant pouring you may run into issues.
Yeah potentially in time, for now we're going to see how it behaves and go with the constant pouring approach 🥴😂 There will be a follow up vid if/when we need to make alterations. Cheers!
@@BrewBrosUK I opted for an inline chiller. Has a recirc pump built in. Ordered python line to go with it which makes life easier.
Means I can just change to a new keg whenever and it doesn’t have to be cold. Game changer!
Sounds awesome!
sick editing G
SHUT UP!!!!