you all probably dont care at all but does someone know a way to log back into an Instagram account..? I was stupid forgot the account password. I appreciate any help you can give me!
@Sutton Matthew i really appreciate your reply. I found the site through google and Im trying it out atm. Looks like it's gonna take a while so I will reply here later with my results.
Hello. Can you do a video cutting tempered toughened glass? Even if it shatters can you still cut through it? Also to cut glass, do you need to drill 4 holes or can you just put it on the glass and cut.
@@fazalurrehmankhanfazalurre7942 sir we make electro plating cutting tools for glass backlight and tiles and marbles Contact and whatsapp no +919820308233 100% Better then this video We make cutting blade that you can glass from any angle without water ☺️ More information contact us
Always take the product to the saw, There are easier ways, I was doing exactly the same 37 years ago, Now it's its become very easy, well done for Manual work handling, You's would have been grinding those corners out for a bit!!! 😊You never polished them ither 😪
Yes you will feel relaxed and at ease with the job of cutting the glass until the disc spinning at 10,000rpms while in the glass cutting your line gets just a hair off center from user error and digs into the glass either shattering and throwing shards in every direction OR the angle grinder jerks towards the direction of spin and gets into contact with your skin or worse your clothes. ALWAYS USE A GUARD ON YOUR ANGLE GRINDER WHETHER CUTTING OR GRINDING. Always!! Try simply powering the tool on momentarily with any grinding disc and when the disc is slowing down about 2 or 3 full seconds after switched off, just touch the flat of the disk.. just with the fingertip as quick as you can.. in that millisecond of the touch you will lose enough skin that will mimic a 3rd degree burn. If no deadman switch and just an on/off switch imagine the horror scene if it grabbed your shirt and twisted it so tight you couldnt breath in an instant and while struggling to breathe and turn the tool off it will be imbedding the blade into your body which has a rockwell hardness of a marshmellow. They can kill.. gloves dont matter, protective clothing doesnt matter unless chain mail. Keep proper grip on tool all times and dont take off the fucking guard.. if you need a different guard for cutting vs grinding, take the time to change em.. and dont use a bigger wheel than the tool is designed for. Smaller is ok, bigger will explode, 100% of the time.. be safe, if your doing something that you wouldnt ever do with your pecker out, think about what youre doing first..
Yes dude. U r absolutely right. Similar accident happened with me. I was lucky. I saved from hell with 2 cuts & stitch on both leg. Power tools specifically the angle grinder is worse weapon. Its a grinder but people use it as a a angle cutter 👹😣🤤 & without guards. Rather than all this bullshit our old hand/manual tools are far better & safe🤗
Have you or are u working offshore on an oil rig or installation? Cause this is exactly what we are taught in the safety courses. All the things you’ve said are absolutely right. No safety - Know accidents , Know safety - No accidents. 😊👍
Wonderful My Friend i love IT ❤
mantap alatnya terima kasih motipasinya
From South Africa. Very clean and skill ful job. Want to see more cuttings with thin glass for making arts and crafts. like making a big sunflower.
Thanks
❤
Superb what a skill full workmanship
بسم.الله.الرحمن.الرحيك....وقل.ربي.زدني.علما.ولخطوره.قص.الزجاج.ابتكر.العقل.البشري.ادوات.سليمه..فالحاجه.ام.الاختراع
That needs skill 👍👍👍
Very nice 👌
Hola ¿Son discos especiales para vidrio?
Awesome.
Very nice thanks
Saludos desde costa Rica excelente 💯💯💯💯
you all probably dont care at all but does someone know a way to log back into an Instagram account..?
I was stupid forgot the account password. I appreciate any help you can give me!
@Colby Imran instablaster :)
@Sutton Matthew i really appreciate your reply. I found the site through google and Im trying it out atm.
Looks like it's gonna take a while so I will reply here later with my results.
@Sutton Matthew it worked and I finally got access to my account again. I'm so happy!
Thank you so much you saved my ass :D
@Colby Imran Glad I could help xD
I used this to cut cake and concluded it works better on glass.
Nice boss
Naic
My Thrissur...where u shop ? Diamond cut off Blade give ?
Sir I need like that for temperd glass
I was wondering what sort of disc/material was used in the video..i really wanna know
JIJY MJ Technician of Diamond coated tools WhatsApp + 91 9656020572
Hello. Can you do a video cutting tempered toughened glass? Even if it shatters can you still cut through it? Also to cut glass, do you need to drill 4 holes or can you just put it on the glass and cut.
You cannot cut tempered glass. It will explode into a billion pieces
Miya bhai
نار
👍
Tuffen glass cutting
Tufn glass cutting hoga kya
🙏🙏👍👍👍👍❤️❤️❤️❤️
¿Are you cutting tempered glass with diamond disc? It works?
Not cut temperd glass
@@jijymjglasstechnician5750 Sir, can tempered glass be used as a dog .. is there any way ??? Plz tell 🙏
Video good you again viet nam thank you
can we cut 12mm toughened glass by this
You cannot cut toughened glass - it shatters!
Can I cutting glass Bangles ana joient please help
What's app.
923022081987
@@fazalurrehmankhanfazalurre7942 sir we make electro plating cutting tools for glass backlight and tiles and marbles
Contact and whatsapp no +919820308233
100%
Better then this video
We make cutting blade that you can glass from any angle without water ☺️
More information contact us
Ok
Yes
Always take the product to the saw, There are easier ways, I was doing exactly the same 37 years ago, Now it's its become very easy, well done for Manual work handling, You's would have been grinding those corners out for a bit!!! 😊You never polished them ither 😪
Glass thampred?
Any details on cuter or product need a special job si reflectors cut done.
Como faço para efetuar a comprá
JIJY MJ The Demo Man India
WhatsApp + 91 9656020572
How would we can get .....sir
Water with angle grinder goodluck
Bhai ye glass cutting chahiye
Agar mujhe glass katar biled chahiye to kya order Dene p aajay ga
JIJY MJ The Demo Man India
whattsapp + 91 9656020572
Cut of wheel can cut the toughend
What's to stop the grinder sucking in the water?
Hindu gods ward against damage to the person for doing dangerous work without the correct shoes or PPE. Its common knowledge.
Where can I buy disk like this?
I buy IT. Connect, OK you
JIJY MJ The Demo Man India
WhatsApp + 91 9656020572
@@jijymjglasstechnician5750 Sir, can tempered glass be used as a dog .. is there any way ??? Plz tell
JIJY MJ Technician + 91 9656020572
😅😂😂😂😂😂
is the glass tempered or annealed I'm assuming not tempered
Not annealed I am sure
Definitely annealed. Tempered glass would have broken into hundreds of small pieces.
Can I buy from you am in kenya
Whattsapp + 91 9656020572
which angle grinder is used in this video
4 inch angle grinder
Mr iyke Aluminium
Can do tempered glass?
No it will explode
Where I can buy this dis
I have IT. You buy IT.
JIJY MJ The Demo Man India
whattsapp + 91 9656020572
Which cuuting blade is this
Diamond coatted blade
Piso potonga kaca temper dmna
not cut temperd glass
ruclips.net/user/shortsefchW-frWiQ?feature=share dekiye kaise katate hai glass
Kon sa cutter blade hai
WhatsApp
+ 91 9656020572
JIJY MJ Technician India
👍👍👍👍
Tempered cut by this blade
Not cut tempered glass
Is this tempered glass?
Temperd glass not cutting
Kya ye taffan glass hai
Yes you will feel relaxed and at ease with the job of cutting the glass until the disc spinning at 10,000rpms while in the glass cutting your line gets just a hair off center from user error and digs into the glass either shattering and throwing shards in every direction OR the angle grinder jerks towards the direction of spin and gets into contact with your skin or worse your clothes. ALWAYS USE A GUARD ON YOUR ANGLE GRINDER WHETHER CUTTING OR GRINDING. Always!! Try simply powering the tool on momentarily with any grinding disc and when the disc is slowing down about 2 or 3 full seconds after switched off, just touch the flat of the disk.. just with the fingertip as quick as you can.. in that millisecond of the touch you will lose enough skin that will mimic a 3rd degree burn. If no deadman switch and just an on/off switch imagine the horror scene if it grabbed your shirt and twisted it so tight you couldnt breath in an instant and while struggling to breathe and turn the tool off it will be imbedding the blade into your body which has a rockwell hardness of a marshmellow. They can kill.. gloves dont matter, protective clothing doesnt matter unless chain mail. Keep proper grip on tool all times and dont take off the fucking guard.. if you need a different guard for cutting vs grinding, take the time to change em.. and dont use a bigger wheel than the tool is designed for. Smaller is ok, bigger will explode, 100% of the time.. be safe, if your doing something that you wouldnt ever do with your pecker out, think about what youre doing first..
Yes dude. U r absolutely right. Similar accident happened with me. I was lucky. I saved from hell with 2 cuts & stitch on both leg. Power tools specifically the angle grinder is worse weapon. Its a grinder but people use it as a a angle cutter 👹😣🤤 & without guards. Rather than all this bullshit our old hand/manual tools are far better & safe🤗
Have you or are u working offshore on an oil rig or installation? Cause this is exactly what we are taught in the safety courses. All the things you’ve said are absolutely right. No safety - Know accidents , Know safety - No accidents. 😊👍
Love letter.
hi, how can i buy this cut off wheel?
and also those files.. thanks
whattsapp + 91 9656020572
Bjr pdg c'est sadjos'sconstruction
Je veux votre numero pour demande un peu des choses
മലയാളി ആണോ
Yes
Jijy, is it possible to cut toughened glass? Pls give your contact number
You can contact me. I want to buy wholesale quantities
JIJY MJ The Demo Man India
whattsapp + 91 9656020572
Le faltó una cinta de antiderrapante , no es la primera vez que las veo.👎👎👎👎
Glass thampred?
Not cut tuff glass