DIY Pooja Mandir
HTML-код
- Опубликовано: 8 сен 2024
- If you are looking to build your own Pooja Mandir, I have included all the major steps involved in this video, so that you can make one at home.
Most of the materials I purchased were from Lowes and Home Depot, and the cost was around $600.
Top:
Large Craft Oak Finial (1.75-in x 3.75-in) - 5
EverTrue 4-in x 8-ft White Hard Finished Egg and Dart Crown Moulding - 4
Ornamental Mouldings 1-1/2-in x 8-ft White Hard Unfinished Chair Rail Moulding - 1
Ornamental Mouldings 3/4-in x 8-ft White Hard Unfinished Chair Rail Moulding - 1
Gold Ceiling Cup Hooks Self-Tapping Screws
AzKrafts Lot 25 Brass Bells 1.13" H
Middle:
Waddell Ash Traditional End Table Leg (1.375-in x 28-in) - 4
Ornamental 2-1/2-in x 4-ft White Hard Unfinished Chair Rail Moulding - 2
Waddell 5504 3/4 in. x 2-1/4 in. x 48 in. Maple Rail Moulding - 1
Doors and drawers:
Ornamental Mouldings 13/32-in x 8-ft White Hard Unfinished Chair Rail Moulding - 1
Ornamental Mouldings 2-1/4-in x 8-ft White Hard Unfinished Chair Rail Moulding - 2
MUXSAM Long Wood Onlays Detail Carved Appliques (2-Pack, 30x6cm/11.9"x2.4")
1/2-in x 2-ft x 4-ft Whitewood Sanded Plywood
Base:
1/2-in x 4-ft x 8-ft Whitewood Sanded Plywood - Cut into 4 pieces (2 x 4)
Ornamental Mouldings 1-in x 8-ft White Hard Unfinished Rope Chair Rail Moulding - For side trim
Maple Bun Feet Coffee Table Leg (2.75-in x 4-in)
Tools used:
ADMIRAL 10 in. 15 Amp Cast Aluminum Table Saw
Kreg Pocket Hole Jig®
Kreg #6 x 3/4-in Zinc-Plated Interior Pocket Hole Screws
Kreg #7 x 1-in Zinc-Plated Interior Pocket Hole Screws
Titebond II Premium Wood Glue Yellow, Interior/Exterior Wood Adhesive
Bosch 18-volt Power Drill Tool
CRAFTSMAN 7-1/4-in 9-Amp Single Bevel Compound Miter Saw
IRWIN QUICK-GRIP Assorted Mini One Handed Bar Clamp
Pneumatic 18-Gauge 2-1/8 in. Brad Nailer
6 Gal. Portable Electric Pancake Air Compressor
Minwax Wood Finish Oil-Based Gunstock Semi-Transparent Interior Stain
Minwax Clear Gloss Oil-Based Polyurethane
www.walmart.co...
Thank you for the video. We were able to complete our protect today.
Very very beautiful 💫💫💫 so creative 🙏👌👌👌👌
Excellent work.Finishing is great.
👏👏👏Very creative workmanship, Thiyagu! The resulting/end product looks awesome! 👌👌👌
Super cute 👍
Great work 👏 👍 👌
Very nice 👏👏👏😀😀
Excellent..... 👍
Fantastic
Amazing. just a quick thing. What is the angle you are cutting the crown moulding at?
Superb mandapam !!
Super. 👏👏
Wow
The design looks beautiful, do you make these to sell?
No. I did this for my personal use.
Very creative. Can you please mention the instructions you used for nailing?
Thank you. I used Brad nailer with 5/8 in. Brad Nails. You also need an air compressor to use with Brad nailer. Here are the links.
Pneumatic 18-Gauge 2-1/8 in. Brad Nailer with CLEAN DRIVE Technology, Tool Bag, and Sample Nails
6 Gal. Portable Electric Pancake Air Compressor
can you please let me know what is craft finial? Is it possible
To share the product links?
This is the crown on the roof of the mandir.
Here is the link. www.lowes.com/pd/Large-Craft-Oak-Finial-1-75-in-x-3-75-in/3559192
What angle did you cut the moulding for gopuram?
I cut mouldings in 45 degree angle. The key is, I stacked the moulding against the miter saw wall while cutting. The video at 6:44 shows the cut.
Please share tools links
I have added a complete list of tools I used in the detail page. Please click on 'Show more' for details.
Can you please share the measurement and where to order the parts?
The base length is 48 inches and 20.5 inches wide and the height is 13.5 inches
The height from ceiling to bottom is 41.5 inches and the overall height is 58 inches.
The parts list is provided in the details just below the video if you expand. Hope this helps.
Hi, can you please share the link for the gold color?
www.walmart.com/ip/Gold-Rust-Oleum-Stops-Rust-Bright-Coat-Metallic-Spray-7710830-11-oz/17011173?athbdg=L1600
Very pp