Update 10 months later lol, so the issue on why my car wasn't reading the speed because the tone ring on the axle and sensor is what determines the speed and send the signal to the cluster so mine was grinded down just like in this video so what i did was replace the axles and cleaned up where the axles goes and took out the liner that goes around it and my issue was solved. Thanks again for making the video and really helped me with fixing my car because i was unsure if it was the axles or speed sensors on the transmission but thanks
So you have to remove the hub and wheel bearing to punch that stainless liner out? There's no way to get it out from the inside without removing the hub and bearing?
Updating on this. I just did the passenger side. It is possible to remove the stainless liner from the inside with relative ease. It's especially easy if you cut all the way through it with a rotary tool cutting disc and/or carving bit. Just takes some prying with a small pry bar or screw driver from there.
They’re not available anymore they came with the car. They were bought a long time ago and they fit like crap so they’re not worth anything anyway sorry thanks for watching.
So I have a similar problem because my 2002 is300 won’t mark speed but I’ve changed speed sensors to new ones and a new cluster it reads the rpms, gas mileage, and temperature everything else like how many miles and how fast I’m going doesn’t work and I took a picture inside the speed sensor and looks like something grinder against the tone ring and damaged it would I have to do something similar to what you are doing and replace the tone ring to get the speed working or no ?
Update 10 months later lol, so the issue on why my car wasn't reading the speed because the tone ring on the axle and sensor is what determines the speed and send the signal to the cluster so mine was grinded down just like in this video so what i did was replace the axles and cleaned up where the axles goes and took out the liner that goes around it and my issue was solved. Thanks again for making the video and really helped me with fixing my car because i was unsure if it was the axles or speed sensors on the transmission but thanks
Cool thanks for sharing and appreciate you watching. 👍
Thank you! This helped so much the is300 is my project car and this is a common issue
Glad it helped hope you subscribed to our channel 👍👍
Great educational video!!
Thanks.
Sounds like neutral drop but fixing stuff
You install new deflecter? Or you didint instal any ?
Did not.
So you have to remove the hub and wheel bearing to punch that stainless liner out? There's no way to get it out from the inside without removing the hub and bearing?
You can try. Ours had bad hub bearings anyway . Leave a follow up if you can. Thanks for sharing
@@Jvcomet Gotcha, thanks. I'm planning to do it before winter. I'll leave a follow up if I remember to
Updating on this. I just did the passenger side. It is possible to remove the stainless liner from the inside with relative ease. It's especially easy if you cut all the way through it with a rotary tool cutting disc and/or carving bit. Just takes some prying with a small pry bar or screw driver from there.
Where did you buy the liner? I can’t find it anywhere.
They’re not available anymore they came with the car. They were bought a long time ago and they fit like crap so they’re not worth anything anyway sorry thanks for watching.
Sorry that was a post I was answering for a set of quarters on another car we did. 😀 but yes they’re not available just leave it out.
So leaving the liner out wont cause any problems in the future??
@@LuisOctavioRuiz1 no
You put on withe the old abs rings ? And it's work good?
Cool glad it all worked out for you. Thanks for sharing
@@Jvcomet hmm?
@@damianplastek yes it worked
So I have a similar problem because my 2002 is300 won’t mark speed but I’ve changed speed sensors to new ones and a new cluster it reads the rpms, gas mileage, and temperature everything else like how many miles and how fast I’m going doesn’t work and I took a picture inside the speed sensor and looks like something grinder against the tone ring and damaged it would I have to do something similar to what you are doing and replace the tone ring to get the speed working or no ?
It Could very well be that more than anything it’ll make the ABS and vehicle speed light come on also
Hey any issues after doing this mod ? Need to do mine as I’m having the same issues
Nope still in use. Guy was here just yesterday!