How to Replace Starter 2003-2008 Toyota Corolla
HTML-код
- Опубликовано: 29 авг 2024
- Buy Now!
New Starter from 1AAuto.com 1aau.to/ia/1AES...
This video shows you how to install a new starter on your 2003-2008 Toyota Corolla. The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start.
This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• 10mm Socket 1aau.to/oa2t/1A...
• 12mm Socket 1aau.to/objZ/1A...
• 13mm Socket 1aau.to/objZ/1A...
• 14mm Socket 1aau.to/objZ/1A...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obtX/1A...
• Socket Extensions 1aau.to/objZ/1A...
• Swivel
• Torque Wrench 1aau.to/oaxK/1A...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
This video is 100% accurate. However, it's a little deceiving because the camera fits into the space in front of the motor. My head does not. Just be aware that this video shows you where everything is, but it's a little harder to see. Awesome video! Thank You!
Just got my first car a 180k miles 2005 corolla s. Love seeing these videos!
Great video, I used the advice you gave, but instead of jacking it up, I just pulled my fan out. Gives you a lot more space to work if your using hand tools, and also makes it easier to remove the starter and fit the new one in.
Best video for working on cars I've ever seen!
Idk …..I didn’t take out the fan nor did I jack up the car…..couldn’t use a reg 3/4 inch wrench since it hit the plastic fan but COULD use a short/small handle 1/4 inch wrench and a short 12mm socket to remove elec connection bolt . The other two bolts I removed with a regular 3/4 wrench . Then I removed 2 clips from the plastic splash guard and wiggled it out the bottom. Did the same thing in reverse to reinstall.
Excellent video! Very helpful, clear and concise!
Worked great! With a second person helping, we managed to get the new starter in from below without raising the car. Love how high off the ground these Corollas sit!
I removed the fan shroud and then had easy access to remove the starter.
330k km and the original Denso starter begun to intermittently spin but not kick out the Bendix.
A disassembly, clean, and spot of grease on the gears and oil on the bushings and it sounds and works like a new one!
Actually it’s easy if u just remove the fan assembly and it’s a lot faster no need jack the car up or nothing comes from top with fan out the way
Great video This helped a lot I have Ramps so it should be easy access from the bottom
Yes the first 14 mm bolt accessed from the right side takes an extension
Great video. Very helpful
I ask because I have a Corolla 2001 and this channel is awesome and I learn a lot about xb and now Corolla but here is a 2003 Corolla and I have a 2001 so I don’t know if is same parts
Great clip thanks! I had a better time loosening one of the bolt from the bottom.
Regards
I replaced mine on an 03 Corolla with a Toyota starter around 2014 & it just got messed up today in 2024. Is that normal for it to go this soon? Also, should I get an original Toyota starter or can I buy another brand? One last thing, is it possible for a mechanic to damage the starter while working on something else?
great video thank you!!! 😁
Straight to the point !
Great video as always
I feel like I over tighten the electrical part. I’m sure I would of known if I broke it right?
thanks this worked great for me! however i did take out the fan which was extremely simple, so I didn't have to take it out through the bottom.
Thanks for the vid. We did it successfully! 😊
Muchas gracias!!!!!
This is alright but it's easier to pull the fan that it is to jack the car up and wrestle the starter in place. Also, beware. I just replaced a good starter because even though it would roll the windows up and down and turn on the headlights, it wouldn't click the starter solenoid.
Serious Question, do you keep the electric radiator fans in place to protect the radiator?
Very helpful. Thanks!
What attachment or tools did you use to remove the bolt at 1:30?
Great Vid😎👌
Really you don't show removing the top bolt the only one that people have problems getting to
Perfect
Well somehow my 04 is different because I don't have that top bolt. I can't find the other bolt anywhere
How many year a starter last?
This process is the same for a Corolla 2001?
+David Figueroa Jr The part in this video does not fit your application, but the install should be the same or similar.
Im struggling to find that first bolt 😭
Algo comment
There are several better videos than this. This one made the process unduly complicated.