Hi Brian. Yes it is handy in the yard. If the shed is a drive through shed it will be awsome. Need a better way to turn the scraper over than the usual piece of rope when it is on the front though but for pure pushing muck in a through shed it would not need to be turned over.
Hi Lisa; You and Robert have many things to keep you busy. I think with a little adjustment the scraper blade should work fine in both the front and rear position. That transfer case looks like it took quite a hit , I hope you can get it fixed. All the best, Ken
Yes Ken it took a beating. It was a customers so we are not in any rush to try and repair it. The scraper blade needs using now to wear the rubber to a new shape 😀
Hi nice video and a lovely tractor... Just wondering is it not possible to shorten the top link a couple of turns to drop the side wings level wasnt sure how much thread was left as it looks pretty short already keep up the good work 👍 👍
Hi. The top link cannot be shortened any nore when on the front linkage as the hook bits hit the scraper frame. On the back are standard hook ends and these let the top link run a lot shorter. Unfortunately due to wear if you get one side to scrape correclty. Eg going forwards when you flip it over to go backwards the top link needs adjusting to get it to sit level again. We have tried different lengths and it causes it to chatter. We will just have to use it till the rubber wears to the correct profile for each direction of travel. Thank you for taking the time to offer advice and welcome to the channel 😀
Good video Lisa, handy to be able to use scraper on front.
Hi Brian. Yes it is handy in the yard. If the shed is a drive through shed it will be awsome. Need a better way to turn the scraper over than the usual piece of rope when it is on the front though but for pure pushing muck in a through shed it would not need to be turned over.
Good vlog interesting cab on your tractor I remember the old Duncan cab on our 1120 John Deere back in the mid 1970s 👍👍
It took a bit of work to make it all work.
Hi Lisa; You and Robert have many things to keep you busy. I think with a little adjustment the scraper blade should work fine in both the front and rear position. That transfer case looks like it took quite a hit , I hope you can get it fixed. All the best, Ken
Yes Ken it took a beating. It was a customers so we are not in any rush to try and repair it. The scraper blade needs using now to wear the rubber to a new shape 😀
Hi nice video and a lovely tractor... Just wondering is it not possible to shorten the top link a couple of turns to drop the side wings level wasnt sure how much thread was left as it looks pretty short already keep up the good work 👍 👍
Hi. The top link cannot be shortened any nore when on the front linkage as the hook bits hit the scraper frame. On the back are standard hook ends and these let the top link run a lot shorter. Unfortunately due to wear if you get one side to scrape correclty. Eg going forwards when you flip it over to go backwards the top link needs adjusting to get it to sit level again. We have tried different lengths and it causes it to chatter. We will just have to use it till the rubber wears to the correct profile for each direction of travel. Thank you for taking the time to offer advice and welcome to the channel 😀
Where is the planting 1960’s style video please or what is is headed?
Hi Stephen. It has not been edited yet and uploaded yet. I will see what i can do for over Chrismas for you.