Just to add to this I know it was a couple years ago but I've had lots of experience with these and the timing chain has slack in it which causes codes to be sent out that says the camshaft sensors and the crank sensors are bad when in actuality they're good they're just reading off of a sloppy timing chain so you can change all these but changing the timing chain guides and water pump while you're in there is the best way to solve all your issues.
It did ended up being my timing chain. You are absolutely right. Knew something was up when brand new sensors were still throwing codes. I got rid of the damn thing.
13 terrain 2.4L started making noise on passenger side of engine. Codes P0016& P0017, cold weather low oil. I’m hoping it’s sensors and not the timing chain
When you had to take off your high pressure fuel hose, did you need to do anything to keep the fuel from gushing out? I just tried to do that and fuel just started flowing out. I'm obviously not a mechanic and I'm trying to fix this myself. I had rags under it in case there was some that came out but there was so much I ended up tightening the bolt back on. I felt like it shouldn't have been coming out that much... 😕
What was the reason for you to change those sensors?. I'm asking because I have a 2012 gmc terrain I feel the when I drive it for 1 hour or so it won't go more then 30 miles per hour and I hope is not the transmission
I have a 2013 Equinox 2.4 and the Camshaft repair is on the passenger side. They are 3'long and are called intake and exhaust. learned this from AutoZone and kid on RUclips. You have the Crankshaft repair... Si?
I bought a intake solenoid and it came out black? It’s okay that? My car it’s leaking hella oil from the solenoids after I traded the grey solenoid to a black one.. but also fits in the solenoid spot which isn’t supposed to fit if was the exhaust solenoid?
Take your car to an advanced auto/ auto zone/ auto parts store have them scan the car when you have a check engine light. Common codes for this is p0011 or p0017. BUT the problem is the timing chain. Over time they stretch and should be replaced. The sensors arent usually the problem.
I have two questions. (1) Is the camshaft and knock sensors the same, just different names? It keeps showing me the same when I look. (2) do you still live in the same area cuz I’d love for you to check my car out. I have 2010 terrain I’m in la marque as well.
What do it mean if you have a 2011 terrain it drives good but when i stop at a red light it shut off it only shut off when I stop and its in drive please help
@@lifeofamodernwoman Not sure what you're saying yes to. The things he pointed to on top of engine are CAMSHAFT position sensors...Intake and exhaust...Not CRANKSHAFT..........
Get back to me on reaching that back sensor B.. because I can get my hand in good position, did you remove anything to get to that back sensor B at the firewall.. please get back to me..
I did mesed up my terrain 2010 because I decide to change the oil from 5w30 to 10w40 was't the good idea messup those olenoids cam shaft sensors and my timing belt plus the guides brok timing chain was grinding the engine block til It make a hole so do not change the recomended oil esp. Factory
Yeet Yeet Family not if you let the car sit for a while. But if you’re in a hurry and want to get it done right away. Then yes it will. But it isn’t much.
Just to add to this I know it was a couple years ago but I've had lots of experience with these and the timing chain has slack in it which causes codes to be sent out that says the camshaft sensors and the crank sensors are bad when in actuality they're good they're just reading off of a sloppy timing chain so you can change all these but changing the timing chain guides and water pump while you're in there is the best way to solve all your issues.
It did ended up being my timing chain. You are absolutely right. Knew something was up when brand new sensors were still throwing codes. I got rid of the damn thing.
Great video, very helpful. Thanks for taking the time to show us all how and where to fine the Camshaft Sensors.
i guess I am kind of randomly asking but do anyone know of a good site to stream new tv shows online?
@Milo Juan Flixportal xD
@Prince Kristian Thank you, signed up and it seems to work =) I appreciate it!
@Milo Juan glad I could help :)
Thanks for taking the time to show us
Thanks for the vid man. This was a good video. It' helped me understand where they were
13 terrain 2.4L started making noise on passenger side of engine. Codes P0016& P0017, cold weather low oil. I’m hoping it’s sensors and not the timing chain
When you had to take off your high pressure fuel hose, did you need to do anything to keep the fuel from gushing out? I just tried to do that and fuel just started flowing out. I'm obviously not a mechanic and I'm trying to fix this myself. I had rags under it in case there was some that came out but there was so much I ended up tightening the bolt back on. I felt like it shouldn't have been coming out that much... 😕
I ordered A and B they do not say A or B on the box are they identical?
Jeremy ur vedio help thank u with my small fingers mayb I can get to it easier thank you
Another thing that helps is taking the battery out to get to the cmahshaft sensors
Changed all mine was the chain at $3000 to replace so now I drive a Ram
It did ended up being my timing chain. Replaced my sensors and still throwing codes. Got rid of the damn thing.
Amazing! Thank you
What was the reason for you to change those sensors?.
I'm asking because I have a 2012 gmc terrain I feel the when I drive it for 1 hour or so it won't go more then 30 miles per hour and I hope is not the transmission
Tengo una duda son dos colores los sensores debe ser a fuerza sor negro con negro i gris con gris?
I have a 2013 Equinox 2.4 and the Camshaft repair is on the passenger side. They are 3'long and are called intake and exhaust. learned this from AutoZone and kid on RUclips. You have the Crankshaft repair... Si?
I bought a intake solenoid and it came out black? It’s okay that? My car it’s leaking hella oil from the solenoids after I traded the grey solenoid to a black one.. but also fits in the solenoid spot which isn’t supposed to fit if was the exhaust solenoid?
How do you know the Solenoids/timing shafts are what need replaced?
Can you do so without a reader?
Take your car to an advanced auto/ auto zone/ auto parts store have them scan the car when you have a check engine light. Common codes for this is p0011 or p0017. BUT the problem is the timing chain. Over time they stretch and should be replaced. The sensors arent usually the problem.
I have two questions. (1) Is the camshaft and knock sensors the same, just different names? It keeps showing me the same when I look. (2) do you still live in the same area cuz I’d love for you to check my car out. I have 2010 terrain I’m in la marque as well.
No, two different sensors.
Good video, thanks, so are two camshat psotion sensor? Thankyou..
Thank you
What tool did you use to take off the fuel line to get to the sensor?
What do it mean if you have a 2011 terrain it drives good but when i stop at a red light it shut off it only shut off when I stop and its in drive please help
Did you figure out what it was bc mine is doing the same thing ???
Any updates, because mine is also doing the same thing?
How do you turn the camshaft by hand, to install high pressure fuel pump? Thanks
Thank you so much on video was having hard time finding sensors A an B. I think after this I'll stick to old American muscle no more new crap.
Those are Intake and Exhaust "Camshaft" position sensors.....not crank.
Yes there are the two black sensors. And there are the two long metal solenoids
@@lifeofamodernwoman Not sure what you're saying yes to. The things he pointed to on top of engine are CAMSHAFT position sensors...Intake and exhaust...Not CRANKSHAFT..........
On the intake side is it common for oil to come out?
I need help finding out what sensor needs replaced on mine. I’ve had it in the shop twice now and again another problem. :/ help over phone anyone ?
Get back to me on reaching that back sensor B.. because I can get my hand in good position, did you remove anything to get to that back sensor B at the firewall.. please get back to me..
What was da code you got when yu scanned your car?
What error code came up for you
I did mesed up my terrain 2010 because I decide to change the oil from 5w30 to 10w40 was't the good idea messup those olenoids cam shaft sensors and my timing belt plus the guides brok timing chain was grinding the engine block til It make a hole so do not change the recomended oil esp. Factory
Doubt your oil did all of that.
@@ubmixinb360 yes!!! Was a big mistake
How did you remove the high pressure fuel line? Just pull the thing out after you loosen the nut?
J Payne, just loosen the nit and the line will slide on out
jeremy olivarez hey bro I have 2016 Acadia and it threw a code P0011 and it leaking oil bad what can I do ?
@@thelegendkillergus7451 it's your vvt solenoid
I'm pretty sure that a Metal Fuel HOSE is called a LINE.
If you are so smart go make your own videos...
If you remove the high pressure fuel line will fuel disperse from it?
Yeet Yeet Family not if you let the car sit for a while. But if you’re in a hurry and want to get it done right away. Then yes it will. But it isn’t much.
When I did it did leak fuel
Can you just clean it and put it back
Nope, I’ve tried
@@cmjo2226 my code come up as a p0017