*Used to supplement the up stairs when it gets hot outside this works very well and **Fastly.Cool** Also works good when the upstairs gets too hot in the Winter from the heater.*
Purchased: August 2023 - still works GREAT!I ruclips.net/user/postUgkxxsUnXhGsSJLim_XnMHyQK0u3XVaW-CGn live in a studio and during the summer it gets scorching hot - really old building with no ac units. I can’t express how EASY it was to install. This unit has been a life savior during the summer and some days during other seasons where it can still be a bit warm at night. In this small place is my friend, a husky, poodle mix and myself. We need AC - lolI don’t use the dehumidifier option - I’m not sure if it will leak in my house, since I did not install the small draining hose that came with it. May look into it late but I don’t worry about much humidity in the apartment. I don’t understand why the negative reviews since all things mentioned, I personally did not find issues with. Definitely worth it!
The fact that you need a RUclips video to explain how to use a remote control says it all. Make a remote that 90% of people understand and not some cryptic message on a 50 year old tech device.
I do a lot of user experience design, and this remote is a case study of what not to do. Symbols, weird access to common functions like clock reset, “smart set” that makes everyone feel dumb, and you will even notice, the up arrow is slightly lower than the down arrow on the remote. I hit the wrong one frequently, and it just occurred to me why that is. No backlight? What year is it?
can I get a link to the manual for this remote - not the installation guide - but an actual written document that explains how to set this thing. It seems like it should be easy, but I am having a time trying to get it to cool
If you put the fan on automatic mode, what exactly does that mean? Does it adjust the temperature to what degree I want and automatically go to that and keep it that way? Say I put the fan at 70 and set it to automatic--does that mean that the unit will adjust the room temperature to 70 and keep it that way?
I know I'm late but just for future people. There are small holes just above the batteries. Use something pin sized to press the 'clock' button. To adjust the clock, press the > clock < Press the start button and set the timing in which you on your aircon Press the stop button and set the timing that you want it to automatically stop
I have had my Mitsi air cond for many years.Often wondered what those symbols were.Each season I just guessed until something happened. Great air con by the way.So quiet compare to a wall mount.
I need more detailed information about exactly how the remote works because my system is not performing as expected. I have three units controlled with one remote (in a rental, so I had nothing to do with setting this up). Does the remote send the complete state information displayed on the remote to the unit with each button press? Does it send the state information for the controlled function? Or just a mutation? If I have a desired setting across all the functions, how do I adjust all three units to that setting and be confident of the result? In particular, in cooling mode, the achieved temperature does not correspond to the displayed temperature on the remote on any of the devices.
I’m also here looking for this answer. When I press down to cool and some times it does not register, but the remote does, if I press it again is it telling the unit to cool down one degree, or is it sending the desired temp which is now two degrees cooler as displayed on the remote.
Discovered the answer myself! I installed the Kumo Cloud which displays the current temp set through the app. I tested my remote by changing it a few degrees without it registering or giving me the beep feedback then the final one I pointed at the unit. The temp displayed on the remote is what it jumped to. So it’s sending the actual number and not just the signal to go up or down each press.
My remote lost pairing. How do you pair a Mitsubishi remote with its wall unit? What's the function of the hidden Reset and Clock buttons that you need to press with a pencil?
Thanks for this basic remote control video. Very helpful. One question. What does Dry Mode do? I have mini-splits in our basement, and the humidity creeps up to 60%. Would Dry mode help? Thanks.
Hi, so basically dry mode is for when it rains and the room moisture builds up and the "Dry Mode" helps the room from keeping level. Basically think of dry mode as a dehumidifier by removing moisture in the room.
@@KingSolrac Thanks! And how does it dehumidify? How can it remove moisture from a room? Is it because the mini-split makes the room colder, so it holds less moisture? But if so, where does the moisture actually go?
@@RobertAJonas Hi, I actually don't know I just googled your question and that's what I found after reading a little guide about this.. Sorry, I was also searching about mine/how it works
@@RobertAJonas I’m no expert, and just found this video to answer some of my own questions ( that shouldn’t need to be answered with a well designed remote control), but I do think I know the answer to your question. The dehumidifier removes water in the same manner the A/C (cooling) mode does. You’ll probably find the water drain hose somewhere near the outside unit. Besides the remotes, I love my 2 units! 👍
Hi, Lawrence. You can contact our Customer Care team at 800-433-4822 or via email at customercare@hvac.mea.com. They will be able to assist you in finding a solution.
Remote somehow unpaired itself from the unit. Read the manual, cant figure out how to pair it to the unit again. Fresh batteries and reset not doing the trick....anyone know how to do this?
So my unit does not have a sun!? Are some units only cooling and not heating?? Also when setting desired temp there is no number display? Do I have a bad remote??
Set the mode on the snowflake than turn on the abanico have to appear all the lines the 4 lines than set the van just one line . Than set 65'F. It wanst easy for me to find the way but finally I make it. I do not know other way to explain . Thank you. I hope it help!
i have msz ge35va2 and i have no idea how to just start the fan, i mean no heating no cooling , i just want the fan to run without the compressor cutting in. Is that possible. Kindly help
How do you set the default so the unit comes on after a power surge or power failure? When we are away an the power surges (happens often in our area) the unit will not turn back on and our house is very HOT when we get back home. Supposedly there is a default setting where the unit will come on after a power surge, but so far no technicians can find the setting. HELP!
Hi there, Ruth. You can contact our Customer Care team at 800-433-4822 or via email at customercare@hvac.mea.com. They will be able to help you with this!
LOVE my Mitsubishi split unit. HATE the remote! I've bought aftermarket universal remotes that work way better and have 7-day programming . to bad you guys can't make a better remote. Even the guys (5 of them came to install) all agreed the remote is horrible. PLEASE get back to the drawing board. when I move and have to install another unit I would love to see a smarter remotte.
LOL the irony is that this is such a well built aircon system by Mitsubishi Electric but the remote sucks to the core. I hope the engineers in Japan will look into it and improvise it!
In an idiotic attempt to reduce the number of buttons, mitsubishi created the most illogical system of hieroglyphics and frustration imaginable. Thanks guys!
Soulseeker Divine use the cover that you slid down to expose the buttons in the video. Keep sliding it down until it slides off, exposing the 2 AAA batteries
The fact that none of Mitsubishi's remotes include a basic light to read the display at night is bonkers. Keep these units out of your bedrooms unless you want to wake your spouse every time you turn on the bedroom light to adjust the air conditioner.
*Used to supplement the up stairs when it gets hot outside this works very well and **Fastly.Cool** Also works good when the upstairs gets too hot in the Winter from the heater.*
Purchased: August 2023 - still works GREAT!I ruclips.net/user/postUgkxxsUnXhGsSJLim_XnMHyQK0u3XVaW-CGn live in a studio and during the summer it gets scorching hot - really old building with no ac units. I can’t express how EASY it was to install. This unit has been a life savior during the summer and some days during other seasons where it can still be a bit warm at night. In this small place is my friend, a husky, poodle mix and myself. We need AC - lolI don’t use the dehumidifier option - I’m not sure if it will leak in my house, since I did not install the small draining hose that came with it. May look into it late but I don’t worry about much humidity in the apartment. I don’t understand why the negative reviews since all things mentioned, I personally did not find issues with. Definitely worth it!
the one buttton i needed help with was not mentioned. clock set
The fact that you need a RUclips video to explain how to use a remote control says it all. Make a remote that 90% of people understand and not some cryptic message on a 50 year old tech device.
I do a lot of user experience design, and this remote is a case study of what not to do. Symbols, weird access to common functions like clock reset, “smart set” that makes everyone feel dumb, and you will even notice, the up arrow is slightly lower than the down arrow on the remote. I hit the wrong one frequently, and it just occurred to me why that is. No backlight? What year is it?
How does the flashing time not warrant and mention...
Exactly! I want to set the Clock, but this "instruction video" makes zero mention of it!!
can I get a link to the manual for this remote - not the installation guide - but an actual written document that explains how to set this thing. It seems like it should be easy, but I am having a time trying to get it to cool
Exactly what I wanted to know - thank you for explaining all of the settings. Much appreciated.
So, it doesn't refer to the timer. Big omission. Only 2/3 of functions covered.
I’ve changed the batteries with working batteries and the remote will not power up. Any idea why?
I am very confused still. Say I want my room at 68 degrees. What should my settings be set at?
If you put the fan on automatic mode, what exactly does that mean? Does it adjust the temperature to what degree I want and automatically go to that and keep it that way? Say I put the fan at 70 and set it to automatic--does that mean that the unit will adjust the room temperature to 70 and keep it that way?
You need to make these more user friendly. Nothing is common sense on the remote!
Great video. I wish I had found it sooner.
Can you please make a new video on how to set timer..
I know I'm late but just for future people. There are small holes just above the batteries. Use something pin sized to press the 'clock' button.
To adjust the clock, press the
>
clock <
Press the start button and set the timing in which you on your aircon
Press the stop button and set the timing that you want it to automatically stop
I have had my Mitsi air cond for many years.Often wondered what those symbols were.Each season I just guessed until something happened. Great air con by the way.So quiet compare to a wall mount.
I need more detailed information about exactly how the remote works because my system is not performing as expected. I have three units controlled with one remote (in a rental, so I had nothing to do with setting this up). Does the remote send the complete state information displayed on the remote to the unit with each button press? Does it send the state information for the controlled function? Or just a mutation? If I have a desired setting across all the functions, how do I adjust all three units to that setting and be confident of the result?
In particular, in cooling mode, the achieved temperature does not correspond to the displayed temperature on the remote on any of the devices.
I’m also here looking for this answer. When I press down to cool and some times it does not register, but the remote does, if I press it again is it telling the unit to cool down one degree, or is it sending the desired temp which is now two degrees cooler as displayed on the remote.
Discovered the answer myself! I installed the Kumo Cloud which displays the current temp set through the app. I tested my remote by changing it a few degrees without it registering or giving me the beep feedback then the final one I pointed at the unit. The temp displayed on the remote is what it jumped to. So it’s sending the actual number and not just the signal to go up or down each press.
Pls how can i used this remote from my mobile?
My remote lost pairing. How do you pair a Mitsubishi remote with its wall unit? What's the function of the hidden Reset and Clock buttons that you need to press with a pencil?
Thanks for this basic remote control video. Very helpful. One question. What does Dry Mode do? I have mini-splits in our basement, and the humidity creeps up to 60%. Would Dry mode help? Thanks.
Hi, so basically dry mode is for when it rains and the room moisture builds up and the "Dry Mode" helps the room from keeping level. Basically think of dry mode as a dehumidifier by removing moisture in the room.
@@KingSolrac Thanks! And how does it dehumidify? How can it remove moisture from a room? Is it because the mini-split makes the room colder, so it holds less moisture? But if so, where does the moisture actually go?
@@RobertAJonas Hi, I actually don't know I just googled your question and that's what I found after reading a little guide about this.. Sorry, I was also searching about mine/how it works
@@RobertAJonas I’m no expert, and just found this video to answer some of my own questions ( that shouldn’t need to be answered with a well designed remote control), but I do think I know the answer to your question. The dehumidifier removes water in the same manner the A/C (cooling) mode does. You’ll probably find the water drain hose somewhere near the outside unit. Besides the remotes, I love my 2 units! 👍
How do you set up a timer?
What's the coldest/lowest temperature? Mine stays at 19c and it can't get any lower. Please advise.
Hi. Can you please provide me with the model number of your indoor unit? Thanks.
How do you change your clock from a 24 hour clock to a 12 hour clock. Lmk. Thank you
Hi, Lawrence. You can contact our Customer Care team at 800-433-4822 or via email at customercare@hvac.mea.com. They will be able to assist you in finding a solution.
Lawrence Keamo lol he could have just told you how instead he just send a helpline
Hi Lawrence, wondering if you're still looking but you can go here: ruclips.net/video/KN8sNmjCTr8/видео.html
Remote somehow unpaired itself from the unit. Read the manual, cant figure out how to pair it to the unit again.
Fresh batteries and reset not doing the trick....anyone know how to do this?
Mine is doing the same. Did you figure it out?
Mine too. Came to this video expecting an answer, but nothing. Any other videos out there with the answer?
Thank you for this it helps!
Is there a way to change the minimum temperature? Mine is set at 61 and is in a rental unit so I would like the minimum to 70. Is this possible?
So my unit does not have a sun!? Are some units only cooling and not heating?? Also when setting desired temp there is no number display? Do I have a bad remote??
I don’t think every system does both, but I feel that the majority do both.
How to set full cooling mode ?
Set the mode on the snowflake than turn on the abanico have to appear all the lines the 4 lines than set the van just one line . Than set 65'F. It wanst easy for me to find the way but finally I make it. I do not know other way to explain . Thank you. I hope it help!
i have msz ge35va2 and i have no idea how to just start the fan, i mean no heating no cooling , i just want the fan to run without the compressor cutting in. Is that possible. Kindly help
Hello, Rahul! Our Customer Care team can help you out with this. They can be reached at 800-433-4822 or via email at customercare@hvac.mea.com.
How do you set the default so the unit comes on after a power surge or power failure? When we are away an the power surges (happens often in our area) the unit will not turn back on and our house is very HOT when we get back home. Supposedly there is a default setting where the unit will come on after a power surge, but so far no technicians can find the setting. HELP!
Hi Ruth. Can you let me know what the model number is of your unit?
Hi there, Ruth. You can contact our Customer Care team at 800-433-4822 or via email at customercare@hvac.mea.com. They will be able to help you with this!
My remote does not have the sun icon I do have a 4way valve aka reversing valve
Is there a video showing how to reset remote
is it possible to remove the beep sound? every function i do, it beeps.. i want that off.
wow, you commented this on another video, it seems like you _really_ don't want to hear those beeps, why?
Would also like to not have the beep. It’s loud and when I change the temp I don’t want to wake anyone up in that room.
thanks, you helped a lot.
LOVE my Mitsubishi split unit. HATE the remote! I've bought aftermarket universal remotes that work way better and have 7-day programming . to bad you guys can't make a better remote. Even the guys (5 of them came to install) all agreed the remote is horrible. PLEASE get back to the drawing board. when I move and have to install another unit I would love to see a smarter remotte.
LOL the irony is that this is such a well built aircon system by Mitsubishi Electric but the remote sucks to the core. I hope the engineers in Japan will look into it and improvise it!
What kind of aftermarket remote did you get? I need the 7-day programming.
I have the same question... Can you link the remote you bought, please?
In an idiotic attempt to reduce the number of buttons, mitsubishi created the most illogical system of hieroglyphics and frustration imaginable. Thanks guys!
Hi I like to understand my aircon MSY-GE 13VA how to check error code with wireless remote control pls
Never once said how it actually functions. Did everything and still no ac
How do we change the batteries?
Soulseeker Divine use the cover that you slid down to expose the buttons in the video. Keep sliding it down until it slides off, exposing the 2 AAA batteries
Heat still won’t come on it’s freezing
Membuka yang terkunci bagaimana
The fact that none of Mitsubishi's remotes include a basic light to read the display at night is bonkers. Keep these units out of your bedrooms unless you want to wake your spouse every time you turn on the bedroom light to adjust the air conditioner.
Ridiculous oversight
TO SET FROM FAHRENHEIT TO CELSIUS AFTER CHANGING BATTERY: press up and down and reset (with a toothpick etc.) all at the same time. You're welcome.
Very helpfull thnx👍🏼
You can't see the remote properly.
THANK YOU !!
Hey Jeff
En español por favor
get your hand out of the shot.
If your here in 2020
Auto. A/C. Heat. Humid. Dehumid.
1:23 That image is a SNOWFLAKE, you dingbat! An icicle is a piece of ice that hangs off something; a gutter, a branch, etc. ;-))
Hello yo no hablar ingles
Lame. Hos finger was covering the remote the whole time.
my remote does not light up?thee is no backlight button and when i hold down buttons as someone suggested, nothing happens? thank you