I'm giving away a BRAND NEW STIHL MS 261 chainsaw! Enter now through November 23, 2023 (Thanksgiving Day). Details here: ruclips.net/video/ZBVu7w2BElM/видео.html
Great overview. I've got a 261 and am about to replace the bar oil hose due to leaks. I've deff neglected cleaning the bar, you gave me a good reminder to rake that dirt out, rotate, and dress it.
Loosen bar nuts first, then loosen chain tension. Your 261 reminds me of my 026 Pro. I use Purple Power in a spray bottle to clean up my saws, along with compressed air.
Excellent instructions. While I routinely clean the guide rail, I never rotated the bar position for even wear. Good point. Never use any ethanol in any small engines, I agree. Just subscribed.
Stihl chainsaws need grease on the clutch/sprocket cover bearing. Remove the clip and the washer, remove the sprocket and clean the inside of the clutch, put grease on the needle bearing, align the oil pump gear lever and assemble it back.
I do like this saw but I can't say that I have a favorite 50cc saw at the moment. Check out my next video and you'll see that I switch back and forth between my saws!
The little hole is where the bar oil goes into the bar. The big holes are for the bar bolts. Stress that you clean the bar groove from sprocket nose to the groove end of the bar. This keeps dirt and sawdust from being pushed into the sprocket noe. I flip my bar after every three or so sharpenings. I do not flip it every-time I clean it. You can tell when one side wears more than the other. They you flip it over.
A paper clip is handy for clearing the path from the oil holes to the bar groove. This can get packed with the sawdust and oil. Thanks for covering the carb while you do other things. Dust and dirt don't go well with precision.
Its funny my brother ran a ms290 for 25 years and he never would do any maintenance besides duct taping the broken air filter cover on and sharpening his chain. It still runs good today! I would say it was maintenance free, Lol 😂
@oldSchool Millennial I have decided to buy 261c so tnx for the info...I hope it will do great for me. Will be using it for firewood,and I think as it's declared for reinforced crankshaft and piston,as well as magnesium case it will work for a long time.
@@devinparry1152 I run the yellow chain in situations when I'm cutting down trees and bucking up newly fallen trees. The reason for this is that the yellow is full chisel with a sharper edge. This also makes the yellow easier to dull if it hits dirt. I use the green in dirty wood that has rolled around in the dirt because it holds an edge better in these situations. The green chain is a semi chisel. Hopefully that helps.
This is a Stihl raker gauge that I was using in this video. I'm not sure what the part number is but you should be able to find it at a Stihl dealer. Thanks for watching!
Thanks man i just bought one of these and is was about 10x dirtier than yours here. So I was checking compression just by slowly pulling the cord and it feels fine, but there was some old gas in the tank. Could that mess with the carburetor even if i wasnt trying to really start it? Also have you yet made a video of the in depth chainsaw tune up with the ms261?
hello, i need help. i have a ms261, not the ms261c like one in the video. i have a large amount of play in my clutch drum and gear. the bearing looks fine. i want to replace gear (325-7) bearing and drum. the part number on MY drum says 1121, everything online says 1141. any ideas?
Yes I do. Actually, these were some of my first firewood saws. I need to give them a little TLC on the carburetors and get them out to run them with some of my newer saws. They have so much low end grunt!
Hi, I just purchased a new 261C and ran about four tanks of gas through it now, I was just curious if you’ve noticed some unburned gas and oil around your decompression valve on the orange plastic? Mine seems to be leaking there, do you know of a higher quality decompression valve I could use or is that just normal? Thanks
Get a real air compressor !!!! Stijl does not recommend using air compressor for air filter!!!! And no solvent on plastic!!! Don’t put out bad information. Thanks
I'm giving away a BRAND NEW STIHL MS 261 chainsaw! Enter now through November 23, 2023 (Thanksgiving Day). Details here: ruclips.net/video/ZBVu7w2BElM/видео.html
Wish I'd found this video in time. I actually bought a new 261 C-M after my old saw died the weekend after Thanksgiving. Love the saw.
My chainsaws stay cleaned, and I admire people who take care of their tools.
I find it relaxing and therapeutic
Small hole is the bar/chain oiler hole, some people use dremmel tool to extend the entrance of that hole so the oil enters the bar easier.
You don't have to loose your chain and to prevent the dust from going into your carburetor just put it in a cold start and it will close the air hole.
Great overview. I've got a 261 and am about to replace the bar oil hose due to leaks. I've deff neglected cleaning the bar, you gave me a good reminder to rake that dirt out, rotate, and dress it.
Thank you!
Loosen bar nuts first, then loosen chain tension. Your 261 reminds me of my 026 Pro. I use Purple Power in a spray bottle to clean up my saws, along with compressed air.
Just Inherited a Sad 391 - Thanks for the Tips!
Thank you for this video. I’m a new sawyer with Team Rubicon and this helps a lot!!
Excellent instructions. While I routinely clean the guide rail, I never rotated the bar position for even wear. Good point. Never use any ethanol in any small engines, I agree. Just subscribed.
Thank you! Welcome to my channel!
Haha, just bought the 261. Watched this video three times already. I feel obligated to subscribe now. Thanks for the content!
Haha! I hope you're enjoying your saw. Thanks for watching and subscribing!
Love too see how you calibrate the saw, not even sure what and when you are supposed to do it????
Stihl chainsaws need grease on the clutch/sprocket cover bearing. Remove the clip and the washer, remove the sprocket and clean the inside of the clutch, put grease on the needle bearing, align the oil pump gear lever and assemble it back.
we started using a grease pen on the stihl sprocket, to extend the bar life, even with stihls closed bearing. it just runs that much better.
i know it is quite off topic but do anybody know a good site to watch newly released movies online?
@Brentley Bobby flixportal :D
@Kylan Evan Thanks, signed up and it seems to work :D I appreciate it!
@Brentley Bobby Glad I could help :)
Looks like the 261 is your #1 choice when it comes to a 50cc saw.
I do like this saw but I can't say that I have a favorite 50cc saw at the moment. Check out my next video and you'll see that I switch back and forth between my saws!
The 261 is definitely my choice in the 50cc range.
I really don't care for 550xp
Good tips
Glad it was helpful!
The little hole is where the bar oil goes into the bar. The big holes are for the bar bolts. Stress that you clean the bar groove from sprocket nose to the groove end of the bar. This keeps dirt and sawdust from being pushed into the sprocket noe. I flip my bar after every three or so sharpenings. I do not flip it every-time I clean it. You can tell when one side wears more than the other. They you flip it over.
A paper clip is handy for clearing the path from the oil holes to the bar groove. This can get packed with the sawdust and oil. Thanks for covering the carb while you do other things. Dust and dirt don't go well with precision.
Great tip!
Video was instructive. Thanks for the content.
Thanks, AJ! I'm glad it could help.
Its funny my brother ran a ms290 for 25 years and he never would do any maintenance besides duct taping the broken air filter cover on and sharpening his chain. It still runs good today! I would say it was maintenance free, Lol 😂
Haha, it's true they will probably still run that way. I think the saws like you more if you give them a little TLC.
If my saw was ever that clean it would stop working.
Lmao same
Great video, clear and informative. Thank you!
great advice learned a lot.
Thanks, Joey!
What about greasing the needle bearing behind the Drumm??
@oldSchool Millennial I have decided to buy 261c so tnx for the info...I hope it will do great for me. Will be using it for firewood,and I think as it's declared for reinforced crankshaft and piston,as well as magnesium case it will work for a long time.
Did you end up getting a 261?
And if so, how's do you like it?
i have just buyed my first chainsaw ms 180
Awesome, enjoy your new saw!
@@OldSchoolMillennial thank you. love the videos
I see you are running the green bar and in another video you said you run the yellow chain. Is there any advantage to switching this up?
@@devinparry1152 I run the yellow chain in situations when I'm cutting down trees and bucking up newly fallen trees. The reason for this is that the yellow is full chisel with a sharper edge. This also makes the yellow easier to dull if it hits dirt. I use the green in dirty wood that has rolled around in the dirt because it holds an edge better in these situations. The green chain is a semi chisel. Hopefully that helps.
Thanks! 😉👍
Thanks, Suzie!
Great video. Thank you !!
Thanks man!
Forgot to mention the fuel mix man you only brought up the non ethanol gas but 50:1 is pretty good to know
What file guide are you using in this video?
I like the guide rail tool built in
Thanks for the videos!
This is a Stihl raker gauge that I was using in this video. I'm not sure what the part number is but you should be able to find it at a Stihl dealer. Thanks for watching!
Thanks man i just bought one of these and is was about 10x dirtier than yours here. So I was checking compression just by slowly pulling the cord and it feels fine, but there was some old gas in the tank. Could that mess with the carburetor even if i wasnt trying to really start it? Also have you yet made a video of the in depth chainsaw tune up with the ms261?
What type of socket or tool can you use on the air filter holder to change the carb!! Any help would be great
Grind down a 8mm
Where did you get the dogs you have on this saw?
I was told all the body on this saw is metal, is that correct? Definitely a selling point for me if it is
hello, i need help. i have a ms261, not the ms261c like one in the video. i have a large amount of play in my clutch drum and gear. the bearing looks fine. i want to replace gear (325-7) bearing and drum. the part number on MY drum says 1121, everything online says 1141. any ideas?
I'm sorry, man. Honestly, I'd take it to my nearest Stihl dealer and have them give you the right part numbers. I'm sure they'd be glad to help.
I use gasoline and a parts brush to clean mine. Works great.
Do i ever need to grease the chain?
Does the 261C have an adjustable oiler? On the bottom?
Yes it does
Nice Mccullochs in the background!! Do you use those for firewood too?
Yes I do. Actually, these were some of my first firewood saws. I need to give them a little TLC on the carburetors and get them out to run them with some of my newer saws. They have so much low end grunt!
How do you remove the spark arrestor
Hi, I just purchased a new 261C and ran about four tanks of gas through it now, I was just curious if you’ve noticed some unburned gas and oil around your decompression valve on the orange plastic? Mine seems to be leaking there, do you know of a higher quality decompression valve I could use or is that just normal? Thanks
Valve should not leak.
WHY IS YOUR BAR UPSIDE-DOWN?
It’s to even out wear. Totally normal
If you can read those letters upside down or the right way up, you're not driving it hard enough. Just saying.
Get a real air compressor !!!! Stijl does not recommend using air compressor for air filter!!!! And no solvent on plastic!!! Don’t put out bad information. Thanks
Bro.. please chill with the "um"s..
⛰️ 🪓 ⛰️