First thing I try to do when removing old or rusty nuts and bolts is to apply penetrating oil to allow more time to penetrate while working on other components.
This was an easy one. Can you show pulling a tank on a 2004 ford f150 with a stripped rear strap nut. The nut is in side the frame and supposed to be welded. Not. It just turns and it's about 14 inched inside the frame. No tool can reach it. Any ideas?
+Charisma Flerg i hope that you found the right video and accomplished your project without damage or injury. It is a good thing to rely on no one when possible.
Great video. But here's a question "Fuel Pump Replacement" I'm . Having a hard time with the cheap plastic connections to the fuel tank,,, without breaking them. 2001 ford explorer btw. Already have the tank loose . Just need to remove the fuel tank sensor.Electrical/ Plastic without breaking it. It is a bit brittle considering the age of the vehicle.So Don't want to break the flimsy plastic electrical connection for the wiring, and have to replace The plastic push buttons for releasing the sensor is crappy btw.
Didn't have to lower the tank. little tight but was albe to do . I Did loosen the filler neck so I could have a little more area to install. do it yourself
need instruction for removing fuel tank from 2014 toyota camry someone put sugar in tank so i want to remove drain and clean and change fuel filter need thank you the instructions for this car
Edward Palomo Go to autozone or order a manual for your specific car, then do what he has said in the video, be safe if you are a novice and make sure you have the proper equipment so you are safe
Just wondering non, but non of the mechanics on the videos wear any gloves?... Doesnt autozone have any mechanic gloves? Or diamond gloves? Im just saying...
Robbie Robinson Is the fuel pump priming? and are you sure you didn't reverse the polarities of the connection? could be you reversed the polarities and it's pushing the fuel into the tank and not out of the tank
What are you a autozone salesmen? You didn't show folks how to disconnect the fuel line on the front of the tank. We don't want to hear about autozone, specially we your leaving out truly needed info
this is so bad, some nogvice is going to watch this and attempt this and fry themselves to death underneath their car. liquid gas is not flammable, it's gas vapours which is flammable (hence why injector spray it in condenses form). Watch the video where some throws an ignited match into gasoline and the gasoline extinguishes the match. And it's hard to tell if the fuel tank has all the gasoline vapours out of it. This job should be left to pros.
5:08, oops forgot to run the lines dry. By disconnecting pump relay and turning over engine until lines are dry.
Found this video trying to figure out how to change my bad front fuel tank on my 93 F-150, very helpful. Wanna have two tanks running smooth
First thing I try to do when removing old or rusty nuts and bolts is to apply penetrating oil to allow more time to penetrate while working on other components.
I believe the host's accent is Tennessee. The only other cadence I've heard like this is Kyle Lamb.
HeeeeeeeHhhheeeheeeeehh oink;)🐷 keydins"😁😆
Thanks for the tips. Running down to NAPA right now
This was an easy one. Can you show pulling a tank on a 2004 ford f150 with a stripped rear strap nut. The nut is in side the frame and supposed to be welded. Not. It just turns and it's about 14 inched inside the frame. No tool can reach it. Any ideas?
thanks for the vid
gloves help protect you from toxic gas and oil, keep you a little bit cleaner, and protect you from minor cuts or abrasions.
STEP #1 : DISCONECT THE GROUND FROM THE BATTERY !!!!
NO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Going to attempt this myself. Cannot get any help to do it so I'm on my own... Here's to girl power!!
+Charisma Flerg i hope that you found the right video and accomplished your project without damage or injury. It is a good thing to rely on no one when possible.
heck yea that's awesome that a woman wants to work on her own car
does a 2010 charger gas tank inter change with Chrysler Sebring ?
Nothing like my crown Victoria that’s for sure
You go chickie
Very Nice. Thanks for the information
Also pay attention to safety tips. Mechanics die or recieve severe injury from failure to work safely.
Ill do. A video today showing what size tools to use thanks again
help with replacing fuel pumps on an 87 gmc v3500.
need to find a video of removing fuel tank from a saturn outlook 2007. please help me.
this was published in 2011 but it looks like it was made during the 80s :P still useful though, thanks!
lol was just transferred from dvd videos to youtube, def older than 2011
Do you have to empty the fuel tank out, can you remove it with leaving half a tank in there?
thank you for this video! I'm getting ready to replace my gas tank on my 89 ford ranger XLT 2.9l. this video is definitely going to make it easier!
I have that exact same truck!
Very good videos and very good infor
Great video. But here's a question "Fuel Pump Replacement" I'm . Having a hard time with the cheap plastic connections to the fuel tank,,, without breaking them. 2001 ford explorer btw. Already have the tank loose . Just need to remove the fuel tank sensor.Electrical/ Plastic without breaking it. It is a bit brittle considering the age of the vehicle.So Don't want to break the flimsy plastic electrical connection for the wiring, and have to replace The plastic push buttons for releasing the sensor is crappy btw.
Sean Soubiea that’s ur problem. Ford exploder
Kelly Griffith haha one big problem
On a 2006 I did not hook the gas tank I put the gas tank back up in the vehicle does not want to start
Didn't have to lower the tank. little tight but was albe to do . I Did loosen the filler neck so I could have a little more area to install. do it yourself
How do you replace the nozzle of the tank
need instruction for removing fuel tank from 2014 toyota camry someone put sugar in tank so i want to remove drain and clean and change fuel filter need thank you the instructions for this car
Edward Palomo Go to autozone or order a manual for your specific car, then do what he has said in the video, be safe if you are a novice and make sure you have the proper equipment so you are safe
If you ran it with sugar in it. It’s probably to late. Trash it and move on
where can I get this siphoning kit at ?
Daniel Cannon Walmart
What size socket I need for the gastank
For a f150 2007
Just wondering non, but non of the mechanics on the videos wear any gloves?... Doesnt autozone have any mechanic gloves? Or diamond gloves? Im just saying...
I need to buy special tools to remove those two gas lines. That's what holding me up right now.
dual tank fuel flow meter repair
i have a 1993 dodge dakota 3.9 v6 i changed the fuel pump it was running now it want start help please
Robbie Robinson Is the fuel pump priming? and are you sure you didn't reverse the polarities of the connection? could be you reversed the polarities and it's pushing the fuel into the tank and not out of the tank
Marcos Mendez
I have a 06 Durango and replaced the fuel pump about a month ago today fuel is dripping out of tank.
Remove the remaining fuel through a small hose by suction vacuum don't use the drain plug because its easier.
1992 Ford Econoline 150
Going to be fun dropping my '83's tank
and the fuel tank of town & country???
porfavor subelos en espanol para la raza somos los mejores clientes de autozon compramos piezas que abeses ni ocupamos.
1987 Toyota MR2 gas tank location
thank you
GET IN THE ZONE - AUTO ZONE! ZSMWRAWHHH
how to remove fuel pump on 2005 dodge ram
That necktie advice is real stuff rough
how do the 3 lines hook up to fuel pump
shoot I wish mine was this easy. Saturn SL
I have a 2000 dodge Dakota Sport quad cab v6 Magnum wheres the gas tank located?
Sell It.
3:40 nearly gave me a heart attack.
Joe Blow you suck
how do you take out the gas tank
That hard to diy
not so simple in a subaru
Make sure you take off your ring also.
how to remove a fuel tank on a Briggs&stratton leaf 5 hp blower
No help at all
Tank in kia soul
PPG = $2.57 vs today AVG= $3.70
4:09 BULL Plastic clip didn't break. Fake. XD
There is no wake this man's last name is bonebreak.. it's a stage name or legally changed
All tank removals are different, sorry but a 1/10.
don't trust an autozone mechanic
What are you a autozone salesmen? You didn't show folks how to disconnect the fuel line on the front of the tank. We don't want to hear about autozone, specially we your leaving out truly needed info
this is so bad, some nogvice is going to watch this and attempt this and fry themselves to death underneath their car.
liquid gas is not flammable, it's gas vapours which is flammable (hence why injector spray it in condenses form). Watch the video where some throws an ignited match into gasoline and the gasoline extinguishes the match.
And it's hard to tell if the fuel tank has all the gasoline vapours out of it.
This job should be left to pros.
I believe the word you are looking for is "combustible". Liquid gas is HIGHLY flammable, but will not explode. The vapors explode.
Do not listen to these two morons. Gas in any forum is extremely dangerous. Do not attempt unless you are smart enough to realize this
He’s a married man
not at all what I searched for