Check out the Unboxing Video to learn what comes inside: ruclips.net/video/XfiQaF4LkXU/видео.html In this video, we go over Installing the Asus TUF 3 Radeon RX 5700 XT EVO OC Gaming Graphics Card - Step By Step Guide. Easy to follow install Guide. Stay to till the very end, for a special message. Check it out on my Amazon Affiliate link: geni.us/BQ8yg
Awesome, so very happy I could help you my friend. Thank you so much for stopping by, liking and subbing as well as commenting, it means so much to me.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
@@ThisBytesForYou Im still in the market for a GPU, I live in Brazil and the RX 6k and the RTX 3k family is out of question for now. Im having a hard time deciding between the Rx 5700xt and the RTX 2060 super, so Im watching each and every unboxing, review and benchmark video I can find on those cards lol :P
@@MrNalettinho Well, the 5700 XT will perform slightly faster than a 2060, but there is the potential for driver issues. You can see my review of the 2060 and 5600 here: ruclips.net/video/mtmJhxfN9Q0/видео.html, they match pretty well and you can find my review of the 5700 here: ruclips.net/video/YWzqVU6Oq74/видео.html, plus I have plenty of gameplay videos for all 3 cards here, so you have plenty of information here. Please do let me know if you have any questions on them, I am always happy to help.
hey idk if u remember me but i commented about rx5500xt and i never bought pc yet Im still saving up Finally im getting mine this week or next week And i finally decided to use rx590 and ryzen 5 3500x I always watch your vid alwayd supporting
Of course I remember you. Take your time on it, you want to make sure you get whats perfect for you. Thank you so much for your support, it means a ton to me.
@@ThisBytesForYou hey man i bought the setup It was doing good but when i open it My psu starts to make fan noise for 5 seconds Then it stopps right now it shuts off completly and wont turn on it is my psu problem?? im taking it to repair shop tmr And how to check if the cpu and others are fine
@@earrapeofficial6794 It sounds like the fan in the power supply might be having an issue or even worse or maybe something completely easier. I would check and verify that all cables are properly seated, make sure your cpu is properly cooled and that the cpu fan is plugged in and you have thermal paste on the heatsink. Verify that the fan on the psu is spinning as well.
Thanks my friend, so very happy you are enjoying them. Don't forget to like and subscribe and click on the bell notification icon so you know when my next video goes live.
You are so very welcome my friend, so very happy I could help and so very happy you enjoyed the video. Thank you so much for stopping by and checking out the video, liking and subbing as well as commenting, it means the world to me.
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
this card is great but the problem is people are confusing it with the original 5700, this is the newer one, the 5700 had a ton if issues but this one had them resolved, I would say this one is better all around and thank you so much for your kind words.
@@ThisBytesForYou Damn, i bought the first version then, can't say what wrong with so far, but i don't do much with it anyway, i start doing some 3d modeling and 2d animation in Blender but can't say if its just running normal. It crash yesterday when i scale up probably too much a 3d model... Anyway, after watching some blender video, i would need something like rtx 3090 but its cost something 5k$ or so in Canada so...it will wait for sure lol. But anyway, meanwhile, what kind of issues i can expect with the first version of this card? I bought it for 700$ like 2 years ago for my first pc build. So i can't get refund or replace it, i kinda find out too late it was a bad but cool looking gpu.... Ty so much for your reply!
Thank you my friend, I do appreciate your kind words, I usually reply much quicker but my stomach is not doing so well today. Let me know if you need additional help.
I removed the driver before I removed the video card, removing the driver does not kill video, it just downgrades the quality since there is nothing to drive it
normally I would recommend it, but since the drivers are still having issues, it might be best to let the current drivers you have auto detect the new gpu, then upgrade the drivers from within the adrenaline software. Just to be safe.
I've installed an AMD Radeon 5500 XT following this video. Works like charm! The only little bug left over is that the BIOS boot screen is corrupted. Gigabyte MOBO with Award BIOS. Dell U2720Q display. Any BIOS tweak needed?
That is odd, never seen that before, can you check to see if your cable is firmly seated. Actually, thinking about that, yes my daughters older Gigabyte board has the same issue, it has nothing to do with the drivers though, since it is not in windows.
Factory reset for the drivers, you wont lose anything you need, just crappy drivers that are going to be replaced with newer drivers, keep watching my friend ;)
sorry bud, while it does have those lights, its not an RGB card, you cannot adjust those lights. If they bother you, you can put tape over them, but thats about it, and be careful with that too because it could burn, but I have never tried it
@@ThisBytesForYou fixed it with a 20-30% power boost in adrenalin...and now im very happy XD 70% max fan speed actually can run off 65% vs the strix temps..and vrm/ddr6 is also 80c or less...at first i thought i had to flash the vbios or etc. Theirs is also locked to 2049 mhz in afterburner mines 2079 out the box ironically.... my friends system is a m-atx...with a top mount aio...XD no exhaust...mine has 9 fans in a MESH II....6 140mms. And the GPU intake fans OFC installed....50c cpu
so first off, notice, a channel that never replies to comments will never reply because you asked them to. Notice, I reply to all my comments, so I will reply to you, and quick is relevant, I get to the comments as I can, I am human. So first off, what is the exact model number of your card. If you say it is this exact card, you cannot change the lighting.
dude i have saphire nitro + and rog strix 850 watts bronze psu do i need to use another 8 pin from the psu i mean 2 8pin slots?for 2pcs 8 pin then connect it to the gpu or if i have the the 8pin and 6+2 pin just like yours will do?
Funny how this comes up now, after that video, I have literally built thousands of machines, like this with no issues for years. Surely you built like this and never had issues, am I right... I think I am.
@@ThisBytesForYou I don't need steve from GN to "illuminate" the fact that air is lighter than water and thus air pockets go up which is why oldschool guys used T lines in custom loops prior to fancy resevoirs. I've been around the PC scene longer than GN has and am a retired PRO ocer who went by the name of chew*. No i've never built like this and honestly I've avoided any and all "asetek" rebranded aio due to having been an insider way back when they started there threaten campaign. I bought the liquid freezer for 2 reasons. 1 it works and works better. 2 they are sticking it to asetek and i support that.
@@brianmack2236 I am fine with people sticking it to whoever as long as there is a reason for it. I have been a Development Engineer for Alienware, Dell (after they bought us) and Velocity Micro, sending many machines I have build (at Velocity) overclocked (surely not as high as you because I have to have my guys reproduce it with all machines) and they never came back with issues, for years. The main issues came from UPS/FedEx and the likes playing kick ball with the boxes. I been around the PC scene since 99 I think (professionally at least). since the early 80's on my own, when Alienware was 20 people, been doing it for years. Sure, I would have preferred to place this liquid cooling unit up at the top, but because of the memory (notice the Z390 has them up at the top) the rad would not fit, and the front pocket is small enough just for the rad and the fans, can't do push pull (different story on that though).
@@ThisBytesForYou LOL @ the UPS and Fedex. I can relate. I shipped Brand new 30 liter dewars to many locations in the local 48 for demo's and shows. They arrived at each show with a new dent. It's not really your fault. The case options for 280mm radiators aio or not quite honestly suck with anything in the mid ATX size examples fractals meshify c phanteks p400a. The sad thing is fitment is impaired by millimeters and could easily be fixed by making the case ever so slightly taller. You have to step up to what I would term full atx like a P500a just to get the fitment you need even though in most instances people do not need that much case.
@@brianmack2236 As a reviewer, I have to use what is sent to me to review, the case was sent and it is an awesome case, I guess till now, but again, no issues so I am still loving this case. I would prefer to install on the top, but since opticals went the way of the do do, no more room at the top. As for UPS/FedEx, man they pull some numbers. At Alienware/Velocity Micro, more systems came back because of shipping damage than our issues or customers issues, costs us lots of money and customers, but it is what it is. You have to imagine, they go in with great intents, but get abused by management, other employees, angry customers and more ,and I guess after a while... just turn into what they didn't want to turn into. Still not a great reason, but that's the way the world turns.
nice video sir ! i got mine rx5700xt couple of days ago, have a lot off issues with it.. my monitor is 144hz, and if i set 144hz in adapter settings my vram sticks 1750mhz even on idle...if i choose 60hz agan, vram drops to ~200mhz and gpu temp drops down by about -20C... tryed to play Warzone, gpu temp 85-90C, junktion temp 107C, fan speed 3200rpm...(it's only on 144hz) if i set 60hz gpu temp stay around 60-65C, fan 2000rpm.
VRAM and GPU speeds change depending on use, they are not up to 1 speed, unless you have your windows profile set to performance, that will try to make everything 100%. Play a game and see if the issue continues. As for the temperatures, there can be a TON of issues. How are your fans configured on your system intake vs exhuast, how many fans do you have, etc. Are you overclocked on the cpu or gpu? What software are you using to monitor this?
Why in my case the fans aren't working? It seems to work fine with every game (really light by the moment..) and the temperatures are under 48°C so... I don't know how to turn them on, and at the same time, there are 2 leds in the conectors cable (pci) that doesn't turn off when i turn off the pc, I don't know if those leds indicates that something isn't conected... So i would like some advice
Hey i know Im having lots of trouble controlling the rgb strip, I saw ur comment that u cannot control it but on the gpu website they have photos of it when it’s a diffrent colour. Are they real or can u still really not control the rgb
Radeon RX 5700 EVO OC 8GB DUAL thermal pad sizes. There are 8 GDDR6 modules and each is roughly 12x14mm. Will there be a different one you ask about tomorrow?
Thanks, I just wanted to make sure what you meant exactly if you were talking through TRIXX or ARGB. The only 5700 I know that you can do that with is the Sapphire 5700.
No, that was the original, the EVO has everything corrected, sadly they didn't make a big announcement to it, you can check it out here: ruclips.net/video/LTX2y0QR024/видео.html
Check out the Unboxing Video to learn what comes inside: ruclips.net/video/XfiQaF4LkXU/видео.html
In this video, we go over Installing the Asus TUF 3 Radeon RX 5700 XT EVO OC Gaming Graphics Card - Step By Step Guide. Easy to follow install Guide. Stay to till the very end, for a special message.
Check it out on my Amazon Affiliate link: geni.us/BQ8yg
.
Great guide and you zoomed in at all the right moments!
thank you so much my friend, I truly appreciate your kind words and I am so happy you enjoyed it.
Man, great tutorial, smooth as butter. Worked wonders for me.
Awesome, so very happy I could help you my friend. Thank you so much for stopping by, liking and subbing as well as commenting, it means so much to me.
Great video. Really helped with my build. RUclips is such a great place for PC help.
awesome, so very happy I could help you my friend, very happy you enjoyed the video.
I loved man, it worked for me. Thank you so much for the help.❤
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
Cool video and greatly explained. This will help me a lot. Thanks for sharing!
anytime my friend, so happy I could help. Also, my name is Ignacio too ;)
This card is huge!
hahah, yeah it sure is, and it performs very well for its class.
@@ThisBytesForYou Im still in the market for a GPU, I live in Brazil and the RX 6k and the RTX 3k family is out of question for now. Im having a hard time deciding between the Rx 5700xt and the RTX 2060 super, so Im watching each and every unboxing, review and benchmark video I can find on those cards lol :P
@@MrNalettinho Well, the 5700 XT will perform slightly faster than a 2060, but there is the potential for driver issues. You can see my review of the 2060 and 5600 here: ruclips.net/video/mtmJhxfN9Q0/видео.html, they match pretty well and you can find my review of the 5700 here: ruclips.net/video/YWzqVU6Oq74/видео.html, plus I have plenty of gameplay videos for all 3 cards here, so you have plenty of information here. Please do let me know if you have any questions on them, I am always happy to help.
@@ThisBytesForYou Thanks! I've subscribed, I like your content :D
Thank you so much my friend, I do appreciate it, I work hard for it and I love that you acknowledged it ;), more coming VERY soon.
hey idk if u remember me but i commented about rx5500xt and i never bought pc yet
Im still saving up
Finally im getting mine this week or next week
And i finally decided to use rx590 and ryzen 5 3500x
I always watch your vid
alwayd supporting
Of course I remember you. Take your time on it, you want to make sure you get whats perfect for you. Thank you so much for your support, it means a ton to me.
@@ThisBytesForYou yay im getting mine tomorrow
@@earrapeofficial6794 nice, let me know how it goes
@@ThisBytesForYou hey man i bought the setup
It was doing good but when i open it
My psu starts to make fan noise for 5 seconds
Then it stopps
right now it shuts off completly and wont turn on
it is my psu problem??
im taking it to repair shop tmr
And how to check if the cpu and others are fine
@@earrapeofficial6794 It sounds like the fan in the power supply might be having an issue or even worse or maybe something completely easier. I would check and verify that all cables are properly seated, make sure your cpu is properly cooled and that the cpu fan is plugged in and you have thermal paste on the heatsink. Verify that the fan on the psu is spinning as well.
love your videos its so helpfull
Thanks my friend, so very happy you are enjoying them. Don't forget to like and subscribe and click on the bell notification icon so you know when my next video goes live.
Great video! Thank you for the help!
Thanks my friend, so very happy I could help you and that you enjoyed the video.
Thank you very much!
You are so very welcome my friend, so very happy I could help and so very happy you enjoyed the video. Thank you so much for stopping by and checking out the video, liking and subbing as well as commenting, it means the world to me.
You are the best ❤️
Thanks my friend, I do it all for you, I hope I helped you ;)
Yeah Absolutely ❤️❤️❤️
thanksss!!!!!
Always a pleasure my friend, so very happy you stopped by, trusted in me to help you, liked and subbed as well as took a moment out of your day to thank me. It means a ton to me and I am so very happy I could help you.
I'm so happy with my purchase
very cool, it is a great card and I hope my videos helped you with it ;)
@@ThisBytesForYou yeah they did thanks
@@ThisBytesForYou one of the main reasons u deserve millions of subs is because u reply to everyone immediately that's amazing
@@ddnn32325 awesome, thanks for letting me know and keep on rocking that sweet card
@@ddnn32325 Thanks my friend, I definitely do try ;)
Hi, How bad this gpu is compare to your rtx 2060? Is it as bad as everyone says? Ty and great tutorial!
this card is great but the problem is people are confusing it with the original 5700, this is the newer one, the 5700 had a ton if issues but this one had them resolved, I would say this one is better all around and thank you so much for your kind words.
@@ThisBytesForYou Damn, i bought the first version then, can't say what wrong with so far, but i don't do much with it anyway, i start doing some 3d modeling and 2d animation in Blender but can't say if its just running normal. It crash yesterday when i scale up probably too much a 3d model...
Anyway, after watching some blender video, i would need something like rtx 3090 but its cost something 5k$ or so in Canada so...it will wait for sure lol.
But anyway, meanwhile, what kind of issues i can expect with the first version of this card? I bought it for 700$ like 2 years ago for my first pc build. So i can't get refund or replace it, i kinda find out too late it was a bad but cool looking gpu....
Ty so much for your reply!
Heat was the issue, but if you bought this exact model, this is the update version, just make sure you have this one. Always a pleasure my friend.
Ima keep it a buck i fw u cous goodlookn out i was having mad trouble tryn put my shyt in ima like n sub💯
What case are you using cuz I’m wondering if it fits in the nzxt h510
Alghazo321ツ Zalman S3 ATX Mid Tower, if u have any full size atx case it should be able to fit
Thank you my friend, I do appreciate your kind words, I usually reply much quicker but my stomach is not doing so well today. Let me know if you need additional help.
Check my description, I have my system build in there
But yes , it will fit.
Great video, but when you remove old gpu and before you get new gpu working - how are you seeing windows information on your display?
I removed the driver before I removed the video card, removing the driver does not kill video, it just downgrades the quality since there is nothing to drive it
I'm upgrading from an RX 580 to the 5700 XT, should I still follow these steps or does it make no difference in this case?
normally I would recommend it, but since the drivers are still having issues, it might be best to let the current drivers you have auto detect the new gpu, then upgrade the drivers from within the adrenaline software. Just to be safe.
@@ThisBytesForYou sounds good. Thank you very much!
@@zacharyspencer534 always a pleasure my friend, very happy I could help, please let me know how it goes.
@@ThisBytesForYou Just got the card today. Install only took 10 minutes and everything is perfect. Thanks again!
@@zacharyspencer534 you are so very welcome my friend, so very happy I could help you
I've installed an AMD Radeon 5500 XT following this video.
Works like charm!
The only little bug left over is that the BIOS boot screen is corrupted.
Gigabyte MOBO with Award BIOS.
Dell U2720Q display.
Any BIOS tweak needed?
That is odd, never seen that before, can you check to see if your cable is firmly seated. Actually, thinking about that, yes my daughters older Gigabyte board has the same issue, it has nothing to do with the drivers though, since it is not in windows.
10:30 that isnt a pc factory reset right? Because i dont want to lose everything
Factory reset for the drivers, you wont lose anything you need, just crappy drivers that are going to be replaced with newer drivers, keep watching my friend ;)
wow!!
Thanks bud, glad you liked it ;)
Hey, I have asus tuf rx 5700. How can I turn off the light( as it is not controllable)
sorry bud, while it does have those lights, its not an RGB card, you cannot adjust those lights. If they bother you, you can put tape over them, but thats about it, and be careful with that too because it could burn, but I have never tried it
Can I change the rgb color on the 5700. That little rgb strip on the gpu is killing me.
Other than using tape, maybe a sharpee, no there is no way, maybe disconnecting the led
that feel when i sold my friend the strix that runs 200-250TDP, and my TUF hits 190w max....
I am a bit confused as to whether you are upset or happy hahha
@@ThisBytesForYou fixed it with a 20-30% power boost in adrenalin...and now im very happy XD 70% max fan speed actually can run off 65% vs the strix temps..and vrm/ddr6 is also 80c or less...at first i thought i had to flash the vbios or etc. Theirs is also locked to 2049 mhz in afterburner mines 2079 out the box ironically.... my friends system is a m-atx...with a top mount aio...XD no exhaust...mine has 9 fans in a MESH II....6 140mms. And the GPU intake fans OFC installed....50c cpu
@@anhiirr awesome my friend, happy you got it working for you and great performance I am sure.
How do I change the rgb pls I beg the strip of led light pls I beg can. You tell me man quick
so first off, notice, a channel that never replies to comments will never reply because you asked them to. Notice, I reply to all my comments, so I will reply to you, and quick is relevant, I get to the comments as I can, I am human. So first off, what is the exact model number of your card. If you say it is this exact card, you cannot change the lighting.
@@ThisBytesForYou it’s the asus rx5700xt rog strix this same card I need the light changed. Yes thank you for ur awesome services
dude i have saphire nitro + and rog strix 850 watts bronze psu do i need to use another 8 pin from the psu i mean 2 8pin slots?for 2pcs 8 pin then connect it to the gpu or if i have the the 8pin and 6+2 pin just like yours will do?
you can use 2 x 8s, you can use 2 x 6+2's or you can use a 6+2 and an 8, as long as you have 2 PCIE power connectors running to it.
My monitor continues to say out of range. I installed a Radeon 5700 xt
does it say the immediately or after a bit of use?
I would be more inclined to follow your installation guide if you knew how to properly install the artic cooler AIO. Lines at the top = Bad.
Funny how this comes up now, after that video, I have literally built thousands of machines, like this with no issues for years. Surely you built like this and never had issues, am I right... I think I am.
@@ThisBytesForYou I don't need steve from GN to "illuminate" the fact that air is lighter than water and thus air pockets go up which is why oldschool guys used T lines in custom loops prior to fancy resevoirs. I've been around the PC scene longer than GN has and am a retired PRO ocer who went by the name of chew*. No i've never built like this and honestly I've avoided any and all "asetek" rebranded aio due to having been an insider way back when they started there threaten campaign. I bought the liquid freezer for 2 reasons. 1 it works and works better. 2 they are sticking it to asetek and i support that.
@@brianmack2236 I am fine with people sticking it to whoever as long as there is a reason for it. I have been a Development Engineer for Alienware, Dell (after they bought us) and Velocity Micro, sending many machines I have build (at Velocity) overclocked (surely not as high as you because I have to have my guys reproduce it with all machines) and they never came back with issues, for years. The main issues came from UPS/FedEx and the likes playing kick ball with the boxes.
I been around the PC scene since 99 I think (professionally at least). since the early 80's on my own, when Alienware was 20 people, been doing it for years. Sure, I would have preferred to place this liquid cooling unit up at the top, but because of the memory (notice the Z390 has them up at the top) the rad would not fit, and the front pocket is small enough just for the rad and the fans, can't do push pull (different story on that though).
@@ThisBytesForYou LOL @ the UPS and Fedex. I can relate. I shipped Brand new 30 liter dewars to many locations in the local 48 for demo's and shows. They arrived at each show with a new dent.
It's not really your fault. The case options for 280mm radiators aio or not quite honestly suck with anything in the mid ATX size examples fractals meshify c phanteks p400a. The sad thing is fitment is impaired by millimeters and could easily be fixed by making the case ever so slightly taller. You have to step up to what I would term full atx like a P500a just to get the fitment you need even though in most instances people do not need that much case.
@@brianmack2236 As a reviewer, I have to use what is sent to me to review, the case was sent and it is an awesome case, I guess till now, but again, no issues so I am still loving this case. I would prefer to install on the top, but since opticals went the way of the do do, no more room at the top.
As for UPS/FedEx, man they pull some numbers. At Alienware/Velocity Micro, more systems came back because of shipping damage than our issues or customers issues, costs us lots of money and customers, but it is what it is.
You have to imagine, they go in with great intents, but get abused by management, other employees, angry customers and more ,and I guess after a while... just turn into what they didn't want to turn into. Still not a great reason, but that's the way the world turns.
nice video sir ! i got mine rx5700xt couple of days ago, have a lot off issues with it.. my monitor is 144hz, and if i set 144hz in adapter settings my vram sticks 1750mhz even on idle...if i choose 60hz agan, vram drops to ~200mhz and gpu temp drops down by about -20C... tryed to play Warzone, gpu temp 85-90C, junktion temp 107C, fan speed 3200rpm...(it's only on 144hz) if i set 60hz gpu temp stay around 60-65C, fan 2000rpm.
VRAM and GPU speeds change depending on use, they are not up to 1 speed, unless you have your windows profile set to performance, that will try to make everything 100%. Play a game and see if the issue continues. As for the temperatures, there can be a TON of issues. How are your fans configured on your system intake vs exhuast, how many fans do you have, etc. Are you overclocked on the cpu or gpu? What software are you using to monitor this?
@@ThisBytesForYou Asus confirmed oficialy that this card was made with longest screws what means gpu radiator not completely reaches gpu procesor.
@@Zeroed_Tolerance yes, and that is why they released this version, which corrects that, you might have the original one.
Why in my case the fans aren't working? It seems to work fine with every game (really light by the moment..) and the temperatures are under 48°C so... I don't know how to turn them on, and at the same time, there are 2 leds in the conectors cable (pci) that doesn't turn off when i turn off the pc, I don't know if those leds indicates that something isn't conected... So i would like some advice
this video might help you: ruclips.net/video/LgBR7Cei5yM/видео.html
@@ThisBytesForYou Thanks, but.. 😅 my rx 5700 xt has to reach 55 celsius to start the fans, I find out in my graphics card info, sorry about that
It should be 60, but it could be changed with the driver, potentially a firmware thing
Hey i know Im having lots of trouble controlling the rgb strip, I saw ur comment that u cannot control it but on the gpu website they have photos of it when it’s a diffrent colour. Are they real or can u still really not control the rgb
You might want to check this video: ruclips.net/video/GTJw0j6ResI/видео.html
Hello
I recently bought this model, and i want to change the thermal pada because my gpu is overheating
What is the size of thermal pada on this?!
Radeon RX 5700 EVO OC 8GB DUAL thermal pad sizes. There are 8 GDDR6 modules and each is roughly 12x14mm. Will there be a different one you ask about tomorrow?
@@ThisBytesForYou thanks for the reply bu i mean the thickness of thermal pads?
I have the rx 5700 xt tuf evo the same as yours in the video nor the dual version
The thermal pad thickness for memory and VRM should be 1.5mm, backplate to PCB is ~2.7mm space, so you should get away using a 3mm pad.
@@ThisBytesForYou i see! Did you ever change the pada for this card yourself or not
Does it fit in the nzxt h510 case with the b450 motherboard
Yes, it sure will, which 450 board do you have, I am working on bringing in some more amd
Is the RGB on the card editable? I can’t seem to figure it out.
Editable how do you mean?
@@jeffredeyesdevil thanks, that was my question
Thanks, I just wanted to make sure what you meant exactly if you were talking through TRIXX or ARGB. The only 5700 I know that you can do that with is the Sapphire 5700.
this board still has the temperature problems??
No, that was the original, the EVO has everything corrected, sadly they didn't make a big announcement to it, you can check it out here: ruclips.net/video/LTX2y0QR024/видео.html
What did you think?
It wont run with just 8 pins?
No.
@@ThisBytesForYou but can a 500 watts psu run it?
Btw thank you for taking time to reply 🙂
@@mond7694 anytime bud and it requires at least a 600watt and sapphire recommends a 650.
how to use the rgb led ?
Sadly, being the TUF series, the single LED cannot be controlled. It is a subtle RGB though.
Okay thanks for you reply
Anytime my friend
u put a 6 pci and 8 in there does the never one only have 8?
If the card has the connections, you have to use them all.