Messerschmitt BF-110E
HTML-код
- Опубликовано: 30 сен 2024
- First part of the build. There will be 4 parts in total, and full build at the end of the process.
This video include detail steps for the cockpit assembly.
Kit of German WWII twin-engine heavy fighter aircraft Messerschmitt Bf 110E. Plastic parts: Eduard, marking options: 5- decals: Eduard- PE parts: yes, pre-painted- painting mask: yes- resin parts: no
The Messerschmitt Bf-110 is a German twin-engine heavy metal fighter with a double tail. The engines used were Junkers Jumo 210Ga, Daimler-Benz DB 601B-1, Daimler-Benz DB 601F, Daimler-Benz DB 605B-1 engines with power from 700KM to 1475KM. The first prototype of the Bf-110 took off in May 1936. The first mass-produced version of the Bf-110 was the C version, which production started in 1939. Version C was regarded as a heavy fighter and performed on average in the September campaign, but much better in the French campaign. However, too heavy and too slow, the Bf-110 suffered considerable losses in the Battle of Britain, which meant that it was systematically moved to the Reich Defense units as a night fighter, which eventually led to the creation of the G and H versions. They were used as night fighters and interceptors against allied bombing expeditions. In combination with the on-board radar (eg FuG 202 or FuG220), the Bf-110 became a very formidable enemy for British bombers. About 5,800 copies of this aircraft were manufactured in the course of production. Technical data (version Bf-110C): length: 12.3 m, wingspan: 16.3 m, height: 3.3 m, maximum speed: 560 km / h, rate of climb: m / s, maximum range: 2410 km, maximum ceiling 10500 m armament: fixed - 5 7.92mm machine guns and 2 20mm MG FF cannons.
Music: Bensound
License code: UNLS9CG4IQPF6MXT
Royalty Free Music: Bensound.com/royalty-free-music
License code: CJXPDL9TLP3XZML2
The build is looking fantastic so far, you have done a excellent job, looking forward to the next update, best regards from Australia 👍👍👍
Hello Kiwi from Australia :). Thank you for watching. I hope the next stage will also turn out well. Greetings!
Great job so far.
I've built this kit. It's a generally pretty good, except for the fit of the engine nacelles (which are absolutely horrible) and trailing edge of the wing. Don't let it discourage you.
Thank you for watching, and for the warning. I will pay attention to it, your comment confirms what I saw on YT and completed builds, I don't think Eduard eliminated the fitting problem with this release, so I will have to face it. Hopefully, the result will be OK :)
Amazing build it wasn't until the photos I realised how much work you put into this 🍺💞👍👍👍💪💪💪
Thank you;)
This is it! At last I find someone that paints the parts before asembling them!!! Lot of people assemble everything and then spray it to after badly paint the details with a brush like control boxes, radio boxes, etc. I believe this is the correct way to build, and the most realistic one. This is the attention to detail that stands out! Amazing work, definitely the best I've seen on youtube.
I'm glad you like it. Thanks for kind words 🙂
Beautiful build and there seems to be no fit issues ? Thanks.
Thank you. Inside there was no fit issues, later it wasn't so good :)
amazing
Thank you for watching and leaving the comment 🙂
Great work! - what type of tweezers do you use?
Thank you. I use fine art FA-510 - rather fragile tool. Second one is the pink Laiwang ESD-12. I took it from my wife and they are quite good. :)
well done ive still got one from 2008 started building it In Glasgow SUDDENTLY had to come back to London the next time I was up in Glasgow all the parts were mixed and missing was my own fault for not stashing them securely so i have another hope it goes together like yours really good sometimes i think i enjoy watching as a surrogate build
Thank you for watching and leaving the comment 🙂
That, as we say in my neck of the woods, is proper nice. As natural as I would expect it to be. Nice sir. Respect from England.
Thank you for watching and leaving the comment 🙂
I have Eduard's 2014 release Profipack of 8203. The 2023 reissue of 8203 in the new Gold Profipack livery box is still the best Bf 110E out there AFAIC, if undeniably challenging to build. All of Eduard's Bf 110s are.
Thank you for watching and leaving the comment. By challenging you mean the fit, complexity, or small elements? So far I have enjoyed the build, despite a lot of tiny parts in the cockpit that after all will not be visible :). However, I saw a few builds on RUclips and I read that the later stage may be hard as the wings and engine nacelles do not fit well.
@@modelfun Complexity, all that glazing and "small elements". Beautiful build though.
The Bf110 is a particular favourite of mine as it was the workhorse which bore the brunt of the Reichsverteidigung against the RAF Terrorflieger night offensive. Also a sterling Zerstörer workhorse in the East & Mediterranean.
I have Eduard's Bf 110C/D "Adlertag" Limited Edition, Bf 110E Profipack & Bf 110G-4 Profipack all in 1/48, so guess I'm rather a type afficionado.
You just popped up on my feed, watched, liked and subscribed....looks fantastic! 👍🏻👌🏻👏🏻
Thank you. Next part will come soon, I Hope in two weeks the latest. Thanks for watching and subscribing.
Cheers 😀
@@modelfun
Awesome....I'll be looking forward to see it! 👍🏻
You're most welcome! 🤜🏻🤛🏻
Great job. Thanks for sharing.
Thank you for watching and leaving the comment. I'm glad you like it. :)
Nicely done
Thank you. :)
fantastic
Thank you. :)
Bardzo dobry wybór, samolot który zawsze mi się podobał, szczególnie z tą wściekłą osą namalowaną na dziobie. Mam tez dobrą monografie odnośnie Bf-110 z wydawnictwa Kagero gdzie są zdjęcia tej maszyny.
Zatem czekam z niecierpliwością na wideo z gotowym messerem.
Dzięki :) Jeszcze nie zdecydowałem jaką wersję będę robił. Ta osa rzeczywiście wygląda super, ale widzę ich bardzo dużo. Może jednak ten z jamnikiem? :)
@@modelfun Ja bym poszedl w osę 😀, ale znalazłem tego jamnika w planszach barwnych.
Samolot z oznaczeniem bocznym 1B+LX, z 13 (Z) JG5. Pilot Oblt. Ziegenhagen. Malowanie górnych powierzchni RLM 74 Graugrun i RLM 75 Grauviolett. RLM 76 Lichtblau od spodu i boki kadłuba.
Jest jeszcze jeden rysunek z tym jamnikiem z JG5. W styczniu 1942 jednostka stacjonowała w Malmi, Finlandia.
@Lotny Lotny tutaj ten pudełkowy egzemplarz z psiakiem to I.(Z)JG 77, Lt. Felix-Maria Brandis Malmi, Finland 1942. Dzięki za referencje do kolorów- zawsze mam z tym problem jak chodzi o Luftwaffe.
Osa jest bardzo efektowna, ale tak sobie pomyślałem, że trochę za dużo jest już tego motywu, a poza tym od 2 miesięcy mam szczeniaka w domu i tak jakoś mi bliżej do tego psiaka na dziobie :)
Pozdrowienia.
@@modelfun Jedno jest pewnez napewno będzie cieszył oczy... oby nie wpadł w oko psiakowi. Mnie kiedyś taki mały pupil zdewastował kartonowy model okrętu 😂😂.
Mam nadzieję że do tego się nie dobierze. ;) Zamknę go za szybą na wszelki wypadek:)