Hello. Thanks for this great video, A quick question, please. In your video, you go into "APIM Module configuration" then to "rear vehicle camera" and simply change it to "enabled." In some other videos I have seen they go into "APIM Module configuration (AS BUILT format)" and manually change numeric codes. Do you know what the difference is between these two different sequences, and why choose one over the other? Thank you
Thanks I just had my camera replaced at ford under recall .. I have reverse camera but no guidelines is that also an option in the scan setting thanks .. so I can tell ford
I did a Cyanlabs Sync 2.0 to 3.4 and I have lost the Asisted Parking Feature on my Ford Galaxy. The system works but it just doesn't show any options on the screen anymore so I was wondering if this is able to get it back? Navigation Guidance Voices are gone as well.
I bought a 2020 Focus with a retrofitted camera (I think) because it doesn't have settings for it in the menu. Is it also has fixed guidelines on display. Is it possible to make them turn with the steering wheel in forscan?
I recently acquired a Ford galaxy titanium with sync 3 It has parking sensors, and traffic signs recognition, I wonder if it has reverse parking camera or does the camera need to be installed manually then enabled by sw Thanks for your help
I have focus mk4 and programming like this didnt work. I have sync 3,4 update and cannot figure out what is wrong. Camera is ok, we tested it only the coding is the problem...
Hi, and what about the car icon that appears on top right corner? is that additional configuration on forscan to display it? i have aftermarket sensors on my ecosport and i have just installed an aftermarket camera and activated it with forscan with success , but the car icon is not there!! :(
Hi , I would bring my van to you (but you are to far away) I’m looking to do the camera upgrade on a 2020 transit. I contacted a retailer for the 3rd brake light camera and loom adapter. The said you can get different looms on the newer vehicles. Is this something you have had experience of ? I you sell that parts for this job, I’ll happily purchase from you. Thanks for the advice Ian
Hi, if you get in contact with us through the contact form on our website - www.advanced-incar.co.uk/contact-us/ we can help you with any questions you may have.
Hello, I have focus hatchback active 2023.. while i was expecting it with sync 3.0 version on it but somehow it is delivered with sync 2.5 and the dealer seems have no idea about the failure and support team say it is not possible to update it to any other newer versions…any suggestions?
We've not tried it as only done it on the Sync 3 on a Transit so far. However if the Fiesta has the Sync 3 it should be the same process. Have a bash and let us know :)
Hello. Thanks for this great video, A quick question, please. In your video, you go into "APIM Module configuration" then to "rear vehicle camera" and simply change it to "enabled." In some other videos I have seen they go into "APIM Module configuration (AS BUILT format)" and manually change numeric codes. Do you know what the difference is between these two different sequences, and why choose one over the other? Thank you
I think that the difference is it’s just easier to switch it to enabled rather than changing numbers
How about the wiring for the camera? Where do i attach the wires to?
Do the transits already have the camera wiring installed back to the rear and you just need to source a Transit rear camera to attach?
Thanks I just had my camera replaced at ford under recall .. I have reverse camera but no guidelines is that also an option in the scan setting thanks .. so I can tell ford
I did a Cyanlabs Sync 2.0 to 3.4 and I have lost the Asisted Parking Feature on my Ford Galaxy. The system works but it just doesn't show any options on the screen anymore so I was wondering if this is able to get it back? Navigation Guidance Voices are gone as well.
Hi.
What pins you used for input?
Would it be the same procedure for a Mk 3 Focus with Sync 2? Using Forscan
I bought a 2020 Focus with a retrofitted camera (I think) because it doesn't have settings for it in the menu. Is it also has fixed guidelines on display. Is it possible to make them turn with the steering wheel in forscan?
I recently acquired a Ford galaxy titanium with sync 3
It has parking sensors, and traffic signs recognition, I wonder if it has reverse parking camera or does the camera need to be installed manually then enabled by sw
Thanks for your help
Ford transit video playback with forscan program ?
I have sync only, will it be ok
Hello folding mirror coding code ?
I have 2011 explorer i turn key on and back off to listen to radio I play until shut off I did that 3 times and camera reprogram
I have focus mk4 and programming like this didnt work. I have sync 3,4 update and cannot figure out what is wrong. Camera is ok, we tested it only the coding is the problem...
I just bought ford ecosport 2019 how do i inow it has reverse camera?
Hi, and what about the car icon that appears on top right corner? is that additional configuration on forscan to display it? i have aftermarket sensors on my ecosport and i have just installed an aftermarket camera and activated it with forscan with success , but the car icon is not there!! :(
Hi, how to enable the dynamic lines. I have recently fixed reverse camera but without reverse camera lines it’s not that much useful. Please advise.
I’ve just had my rear camera replaced and have the same problem,no guidelines. Did you manage to get this problem fixed?
Can u fix reverse camera on ford focus how much
Hi , I would bring my van to you (but you are to far away) I’m looking to do the camera upgrade on a 2020 transit. I contacted a retailer for the 3rd brake light camera and loom adapter. The said you can get different looms on the newer vehicles. Is this something you have had experience of ?
I you sell that parts for this job, I’ll happily purchase from you. Thanks for the advice
Ian
Will this work on 2020 Ranger FX4
What tool i need to code the camera pls?
Hi, if you get in contact with us through the contact form on our website - www.advanced-incar.co.uk/contact-us/ we can help you with any questions you may have.
Have you ever gotten the “No Camera Detected” message?
No message at all...
That's it??? Doing mine today...thanks!
Hello, I have focus hatchback active 2023.. while i was expecting it with sync 3.0 version on it but somehow it is delivered with sync 2.5 and the dealer seems have no idea about the failure and support team say it is not possible to update it to any other newer versions…any suggestions?
Does it work with Ford Fiesta 2018+ with Ford Sync3 too?
We've not tried it as only done it on the Sync 3 on a Transit so far. However if the Fiesta has the Sync 3 it should be the same process. Have a bash and let us know :)
@@AdvancedInCarTechnologies hi what camera did u used, need to be oem or can be aftermarket ? What's connect rca , Fakra?
You need a special look that connects to the SYNC that then gives you the yellow phono.
Then you can use any aftermarket camera you want.
You do not have the guide lines or the active lines. Bet that zoom does not work either.
I think you right there because I did exactly the same and my screen is stuck on zoom in and I haven't got a clue how to fix it. Any advice please