Thanks! This was super helpful in getting my image transmission system up and running. Love the object tracking! One note: I didn't see you mention anything in the ZY play setup for turning "off" cellular data for ZY play. That was necessary on my iphone XS to get the image transmission working.
This is really a big problem and apparently if you ordered the gimbal with follow focus and transmitter it's in the pack but with transmitter on it's own it doesn't come with it. One of the most important things to be honest because it's really hard to find such a short mini to micro hdmi. I have bought the long one hdmi to micro hdmi and adapter from hdmi to mini hdmi. That sucks
Seriously!!! It’s been a pain in the ass finding this fucking mini hdmi cable and of course I bought a micro hdmi on accident bc who the fuck k own there’s 3 different types of hdmi cables?!
Is fucked up that it doesn’t come with the cable, but I found them in AliExpress NOK 183.39 20％ dto. | ZHIYUN-Cable de transmisión de imagen oficial, HDMI a Micro/Mini/HDMI, para transmisión de imagen, grúa, cardán de mano de laboratorio a.aliexpress.com/_mMjoP3X is thicker than I imagined but the quality is excellent. I bought the mini HDMI to mini HDMI to connect with my Nikon Z6
good tutorial , super helpful but one question , 1:32 you have said it is good to charge the module before every use, does this mean the module has build in battery ? if yes that means i do not need an external battery to charge the whole Image Transmission System and i do need an external battery only for charging 1- the camera 2- a monitor (optional ) for BMCCP 4K , i hope someone confirm or correct this ?
I was going to ask if it could be used independently but of course you covered it 😄 wonderful tutorial. I’m actually more excited to use this without the gimbal what a great piece of kit!
Hi, thanks for the video! I have Transmitter 2.0. I did all as in this video. Everything is ok, but problem is that here no image transmission. I can operate on screen with settings, movement etc but no image on smartphone. Please add here a7M3 camera settings and please check what cable exactly is it necessary to use.
The kit arrived today. The included HDMI Mini to HDMI Micro cable (A cable) isn't long enough to connect to my Canon EOS M50. It seems to need to be 1ft long and the micro HDMI end needs to be 90 degrees as to not hit the pitch motor.
I bought the transmitter separately (had weebill S already) and it came only with USB cable but no HDMI cable! ZHIYUN told me that the HDMI cables are only included if you buy the Weebill S pro package with motor and transmitter. There are also other issues. The transmitter adds in the way mounted as it is shown here in the video to much not centered weight (leaning to left) which results that I cannot balance my Nikon Z7 with 24-70S2.8 anymore because I cannot change battery anymore if mounted! I turend it around and it works so because weight is more centered. Currently I have to wait for HDMI cables which I had to buy from Alibaba (and therefore it will take a month to arrive here in Europe) because ZHIYUN does not sell them in Amazon or ebay in EU. Will post here again when my setup is working.
Hi, I have a Sony a7iii, when trying to set up the transmitter with my Weebil S I have to go manually into the settings to connect to the transmitter, however it comes up saying ZHIYUN_TECH_FB16 No Internet Connection. I am not sure what I am supposed to do now?
doesnt work anymore :/ my two devices wont connect to it and if it finally is connected the app tells me it needs to be connected to the trans mount and the error message tells me its connected to the trans mount but wont recognises it. the 1.8/5 star rating on the appstore is on point
what a Round Shaped Pilot do you use to operate this gimbal? To be seen first aside on the table a then used by you since about 3:25 minute of this video.
You can with the Zhiyun Play app, when you select the right setting in the Weebill it appears in the menu as a new item and you can control de focus from the app and even both zoom and focus separately if you install both motors
Hey great video! I have a question, when taking photos with the Sony a7iii and the transmitter connected to an ipad pro, is it possible the image to get saved automatically in the ipad the time I take the picture in the camera? so, let's say, if I am in front of my client, in the middle of the street, he could directly select his favorite photos from the ipad and I would send it to him straight away by whatsapp or email from the ipad. Thanks in advance.
What’s the best way to use & (wire up) with also having a Ninja V recorder that uses HDMI from the camera. Ninja V can record in 4K. I saw a somewhat similar question but the answer did not describe my question. Camera is Nikon z6. Very good video by the way 👍. Thank you for your help.
Thanks for making this video ,very professional and informative, what is the battery stated and can this draw power from the gimbal and subsequently charge the camera?. Just curious. Thanks and keep up the great content.
Any chance you can make a more comprehensive solo video on smart follow? I would LOVE to see it set up on a tripod and following a performance or person moving around a stage. Thank you.
What is the size of the small mounting screws that connect the transmitter base plate to the Weebill S? I've misplaced mine and need to get new ones :D
Hi, I am using sony a7iii, two things did not work for me. When I press record on the monitor, the screen goes blank and can not see the image. and second thing is joy stick on the monitor dissipated. What have I got wrong?
Did you get it to work? I been trying to connect my a7iii to the transmitter and the weebill s but when I plug in the HDMI to the camera the screen goes black and the app says that the item is not working correctly. I tried changing the settings of the camera to PC Remote etc and it still doesnt work.
Hi, there. I absolutely love the gimbal but I've had a nightmare trying to sort transmission with the Canon M50. It may well be that other M50 owners have solved or found a workaround for this problem. Basically, with the M50, the HDMI (micro - thanks, Canon) and the USB control port are not only too close together but on the wrong side of the camera altogether, as far as the transmission setup is concerned. The cables, when connected to the transmission module that can't be reorientated, will not reach the camera ports. The only way I can get it to function is ... wait for it ... backwards. I've bought an HDMI full female to HDMI micro male, which has sorted out the video feed side but I don't know what to get to lengthen the cable that fits into the SS-USB port on the transmitter. When connected (backwards) to the camera, it's not a snug fit either. From what I can gather, many different camera owners are having their own peculiar issues with the Weebill S and consequently it would be INCREDIBLY useful if Zhiyun and/or yourself could do brief videos for the gimbal for each model, even if that means we have to buy additional cabling. We just want it to work. Cheers
Ugh - I just noticed I have the same problem.. Quite annoying because this is not something we can look into/ research before buying.. I've been sitting here for ages trying to figure out how to connect the cables. I have a Nikon z50.
@@hitessa I eventually found a flexible cable to sort this problem. It now all fits together but I still can't get the transmitter to work with my android phone.
I really like ZHIYUN products but the video uses a Sony A7 III camera. At time 6:18 I Shutter Speed, ISO, Aperture is mentioned. It's misleading because it doesn't work with the Sony A7 III camera.
@@ZhiyunTechGlobal on the video, you have connected camera to the image transmission directly by HDMI and USB. my question is , can you ad Atomos between them to record on the external recorder and control gimbal by phone. Atomos has HDMI "in" and "out".
@Zhiyun-Tech Thanks for the Weebill S, Excellent Design! ~ A quick question for you : If we have an external monitor mounted on the side to record and provide a visual (Ninja V5 monitor), can we still use thee image transmission system as a second source transmitting the image to a cell phone?? Basically having two monitors .. the Ninja V5 recording as a monitor, and then a cell phone connected using the Zhiyun image transmission system with the ability to use the Weebill phone app for video controls ?? Thank you in advance
@@Adrelanine I have the box but there is no HDMI cable there - as per below it seems that it isn't included. I am trying to work out if it will function without it, otherwise it seems crazy not to included it!
I just set mine up today with a Sony A7riii. I am having trouble panning with my phone. I only seem to be able to get a few degrees. Tilt works great and roll is a little crazy. But really I want to be able to pan and tilt for remote control especially mounted to a tripod or car. What do I need to change to make pan function?
@@adriancolussi3138 it kinda sucks because I love their focus system and low light ability, but controlling Sony Cameras remotely is just a pain in the ass.
Thanks for sharing. Is it possible to connect an external monitor+recorder with the camera that's attached to the Weebill-S gimbal? Does the gimbal have an HDMI pass-through cable?
Hi, I want to make sure...if I use my cell phone, download the gimbal weebill app onto the phone, and attach it to the phone, do I need the image transmitter. I have heard yes and no. Please clarify if you don't mind. Also, if my camera auto focuses in video, do I need the motor? Thanks for clarifying.
do I need the transmitter and receiver to use the Pilot. Or just the transmitter? Or just teh pilot is enough to steer the gimbal remotely? I plan to obtain the transmitter and pilot. But do not know if there is a need to buy the receiver also to use this pilot.
Hi great video but the video transmission feature not working for me nore the camera controls working with the gimble at all even though all the cables are connected. Phone app does get connected but still no control works aspect moving gimble around no capture button no video recording and no image transmission what's going on here I'm using canon r8
Excellent review and tutorial !! Greatly appreciate it! ~ A question for you about the wireless monitoring and camera control feature ~ I currently have a Panasonic GH5 and always use the Atomos Ninja V 5 recording monitor. This monitor connects to the camera to serve as a larger viewfinder and also has the ability to record directly to SSD. I plan to get the Zhiyun Weebill S and was looking to see whether the image transmission system is required or not?? If I'm just looking to use the Weebill S as a smooth stabilizer gimbal, do you need the image transmission system for the ability to have the viewfinder even show up on the Ninja V monitor ?? I plan to use the gimbal for the typical features of smooth filming, without the need for controling the gimbal with my phone. Any idea whether the image transmission system is necessary for the typical viewfinder image to show up on the monitor that usually just serves as a larger view compared to the camera screen. Would greatly appreciate any insight ?? ~ Thank you
Hey Marc, in your case, the image transmission system is not required if you have already got a monitor and have no needs for controlling the gimbal with your phone!
I have a question. Can you pull focus with this gimbal and the focus weel without connecting the focus motor like you can with the dji ronin sc or do I have to use the motor all the time. I have a Sony a 6400.
Hi zhiyun I have a problem with my weebill S for a week when I turn it on, it turns on but the motors do not react. I don't know if you have any advice for me. Thanks
Maybe a daft question, but I can't find clear information on it. The Image Transmitter can send 1080p 30fps to smartphone. Does this mean one can only make films in this quality or is it still possible to record on the camera at say 4K?
Thank you for this clear and very helpfull tutorial. I bought the Weebill S Pro Package, including this transmitter. Inside the transmitter box, the transmitter mounting plate us missing. Do you have an idea where I can buy this mounting plate? Thankyou on advance.
Why on your site you don't talk about the new model (TransMount Image Transmission Transmitter 2.0 ) and there is no comments on RUclips. Also, why can't I find the Receiver on Amazon.
Since the controls of the Weebill-S are not working on my Fujifilm X T20 - I guess that this module will also just provide the plain picture transfer and nothing more. Am I right?
Nothing about live streaming? I got it to work with youtube live (via the custom stream) but can’t get it to work consistently. FB live doesn’t work at all.
Since you're having problems with it being consistent, this is probably why they're choosing not to speak on it. But why advertise in the 1st place if the feature isn't ready?
I have a question about the weebill S with transmitter and a Sony a7R3. My Camera follows an object, but it is not focused/sharp. If the Object changes the distance it becomes blurred. AF-C is set. I would be very happy to hear from you.
What are the settings on the camera? I have the same setup using a7iii but I always receive “the device is not working, please restart and connect again”, also my camera screen goes black after plugging in HDMI cable.
I'm having the same issue with my a7iii too, I'd really hope that zhiyun reps could respond. I got the image to come through and have set the gimbal camera to css, but have no luck in controlling the camera from the gimbal when image transmission is on. If I dont use image transmission then I can set the camera on the gimbal to pano, or canon and then it allows camera settings control. Please reach and help if anyone can chime in.
I have the same issue. A7iii and no camera controls with image transmitting. Without image transition I have the controls via the gimble by selecting pano instead of ccs. Has anyone got this working yet?
Your enthusiasm makes this sound simple. It’s not. I’m using a Canon M6 MKii. I can get the Weebill to connect through the ZY app and, once, I actually got an image to come through the app. Woo hoo! But, I then tried follow focus. I was able to tap my phone screen and get the autofocus brackets. then, I moved. Nothing. No follow. The Weebill-S didn’t move. Here’s my main question: Why is it that when I connect the gimbal to WiFi, I’m unable to connection the image transmission module to WiFi? I keep getting an error message that says the transmission unit requires a WiFi name that is formatted in a certain way (which happens to be the way it is actually formatted)? Does this having anything to do with why I seem to be able to control the gimbal through WiFi, but I get no action from the image transmission unit? I hope someone answers because I’m getting ready to blaze my Amazon review.
Hi I've setup the gimbal with the transmitter. We can get the control to the gimbal to work via bluetooth. However, we cannot get the wireless transmitter to connect to the phone. When we connect to the transmitter, the wifi indicates there is a "limited internet connection". We cannot can any videos or image. What is wrong?
For canon 80d, is it the micro to mini usb cable for connecting the camera to the transmission module, and not "another" multi-port to mini usb cable (which is not included in the packaging). I asked this because in the module, the port is for multi-port type cable, and there is no included multi-port to mini usb cable included in the package, that is why it confuses me. Or, the micro usb can be plugged in to the multi-port of the module, and not lose any feature (e.g. Smart Follow)? I hope my question is clear. And, 2nd question, for canon 80d, is it mini-hdmi to mini-hdmi for connecting the module to the camera? Thanks a lot.
Where can we find a list of cameras that are supported? I've a FujiFilm X-T3. Google isn't showing any links available on this; neither on Zhiyun's own product listing.
Followed your instructions exactly and got everything up and running with my Sony A7iii. However, when connected to the image transmission module, the only way I can start/stop recording is via the button on the screen app. The on-gimbal red record button no longer functions. Did I miss something in the setup?
Jeff Burrows I have it set up with Sony a6500 using the exact cable he plugged from the camera to the transmitter in the video and the record button in the gimbal works. The 002 cable won’t work.
Is it only compatible with Weebill-s as I see you connected the transmitter through some cables with the gimbal it self was that only for the charging purpose?
Hi thanks for the tutorial. I have a problem with the transmitter. When every i push the record button, My phone screen turns black and i can't see my footage on my phone. And also my screen is not full. I am using a6300. If you can help it would be really nice.
I didn’t see that but I hope you can control the focus from the app (at least from the zoom motor but ideally also from the lens motor for AF lens) ? Otherwise seems like a major missing functionality
hello zhiyun, I bought a combo pack of the weebillS but I cannot find the WiFi of the transmitter with my phone. I am using a REDMINOTE9PRO. if you have a tip please give it to me
Hi ZHIYUN i'm wondering if the transmission is the reason that I no longer can connect to my Wibill lab with my phone. (i don't have this new transmission)
Hey brad, when connected to my phone I get interferences every 7-8 seconds for about 1 second. Im close to the transmitter and on the latest version. How can I avoid that? Using a sony a7iii and a samsung m30s as a monitor .Thanks
Hi Brett, hope you are well. I can not find the information that I am looking for on Zhiyun web site. It’s a nice looking website but not customer friendly. Can you tell me has Zhiyun updated the software or hardware for the Webill lab so it transmits with the Fujifilm XT3? I have almost Abadan using the gimbal due to my frustration. Other gimbals are easier to deal with. Please advise. Thanks!
Can live video be transmited to the ZY Play app without the Transmission System ? Just by connectin the camera to the weebill with usb cable and phone to weebill by bluetooth ? I see that on the LAB version it is done so, but I can't seem to get it working on the weebill-S.
I would recommend getting the Tilta Nucleus Nano for non cine lenses. It's worth the price and is independent of which device you place your camera on, be it gimbal or tripod.
How is the performance of the new image trasmission module 2.0? Maybe it is a stronger reliable hdmi transmitter that can be used also stand alone without the gimbal? Something like hollyland tramsitters?
I have about 5 days Image Trasmission module 2.0. Crystal clear is probably exaggerated, but the video transmission is much smoother to iPad than directly from the camera.
Hi there, I was hoping from some help from you. I recently bought the image transmitter. I am trying to connect to a Canon EOS R. The transmitter firmware has been updated. I connected the unit with both the mini hdmi to mini hdmi and the USB-C to Micro B 3.0 which are both brand new cables. When I connect the cables to the camera and turn transmitter on I get an ERR code on my camera. Any ideas of how I can fix this problem. I greatly appreciate some feed back. Thank you.
the first time I connected the transmitter it worked perfectly now it's giving me a your device isnt working and wont connect to wifi...any solution for this issue?
im interested in using the object tracking feature in the app and I want yo know if there is any compatibility issues between this module and the weebill LAB since I need the gimbal to track an object. thanks
i do notice the the micro pug it's a bit short respect the HDMI cable i do use for connecting my sony to the external monitor ! Could be this the corse of the no HDMI on the app and the red led ?
Thanks! This was super helpful in getting my image transmission system up and running. Love the object tracking! One note: I didn't see you mention anything in the ZY play setup for turning "off" cellular data for ZY play. That was necessary on my iphone XS to get the image transmission working.
Finally wait is over i was confused about image transmission
Can it be used without the gimbal as an independent Transmiter?
My package didn’t come with the HDMI cable? What’s up with that?
This is really a big problem and apparently if you ordered the gimbal with follow focus and transmitter it's in the pack but with transmitter on it's own it doesn't come with it. One of the most important things to be honest because it's really hard to find such a short mini to micro hdmi. I have bought the long one hdmi to micro hdmi and adapter from hdmi to mini hdmi. That sucks
@@Surrounded_me Yeah its a real pain to source one. Zhiyun should at least have them as an available part on Amazon.
any links to where to buy the cable? need on for Sony A9
Seriously!!! It’s been a pain in the ass finding this fucking mini hdmi cable and of course I bought a micro hdmi on accident bc who the fuck k own there’s 3 different types of hdmi cables?!
Is fucked up that it doesn’t come with the cable, but I found them in AliExpress NOK 183.39 20％ dto. | ZHIYUN-Cable de transmisión de imagen oficial, HDMI a Micro/Mini/HDMI, para transmisión de imagen, grúa, cardán de mano de laboratorio
a.aliexpress.com/_mMjoP3X is thicker than I imagined but the quality is excellent. I bought the mini HDMI to mini HDMI to connect with my Nikon Z6
Thank you for explaining about using it only as an image transmitter. Torn between buying this or a monitor only.
good tutorial , super helpful but one question , 1:32 you have said it is good to charge the module before every use, does this mean the module has build in battery ? if yes that means i do not need an external battery to charge the whole Image Transmission System and i do need an external battery only for charging 1- the camera 2- a monitor (optional ) for BMCCP 4K , i hope someone confirm or correct this ?
I was going to ask if it could be used independently but of course you covered it 😄 wonderful tutorial. I’m actually more excited to use this without the gimbal what a great piece of kit!
Hi, thanks for the video! I have Transmitter 2.0. I did all as in this video. Everything is ok, but problem is that here no image transmission. I can operate on screen with settings, movement etc but no image on smartphone. Please add here a7M3 camera settings and please check what cable exactly is it necessary to use.
Did you ever figure this out? I am still having the same issue with A7III
The kit arrived today. The included HDMI Mini to HDMI Micro cable (A cable) isn't long enough to connect to my Canon EOS M50. It seems to need to be 1ft long and the micro HDMI end needs to be 90 degrees as to not hit the pitch motor.
buy a separate cable: www.amazon.de/gp/product/B00P7GSAM2/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
I bought the transmitter separately (had weebill S already) and it came only with USB cable but no HDMI cable! ZHIYUN told me that the HDMI cables are only included if you buy the Weebill S pro package with motor and transmitter.
There are also other issues. The transmitter adds in the way mounted as it is shown here in the video to much not centered weight (leaning to left) which results that I cannot balance my Nikon Z7 with 24-70S2.8 anymore because I cannot change battery anymore if mounted! I turend it around and it works so because weight is more centered.
Currently I have to wait for HDMI cables which I had to buy from Alibaba (and therefore it will take a month to arrive here in Europe) because ZHIYUN does not sell them in Amazon or ebay in EU.
Will post here again when my setup is working.
Not supplying a suitable HDMI cable is really poor.
Finding a suitable one (min HDMI>mini HDMI) is surprisingly difficult.
Hi. Can you send me a link to the cable on Alibaba? Thanks a lot
de.aliexpress.com/item/4000410824800.html @@SebastianBurkart
@@fscherz cool. Thanks a lot
Hi, I have a Sony a7iii, when trying to set up the transmitter with my Weebil S I have to go manually into the settings to connect to the transmitter, however it comes up saying ZHIYUN_TECH_FB16 No Internet Connection. I am not sure what I am supposed to do now?
No internet connection for me too
doesnt work anymore :/ my two devices wont connect to it and if it finally is connected the app tells me it needs to be connected to the trans mount and the error message tells me its connected to the trans mount but wont recognises it. the 1.8/5 star rating on the appstore is on point
what a Round Shaped Pilot do you use to operate this gimbal? To be seen first aside on the table a then used by you since about 3:25 minute of this video.
cool. thank you for sharing!
how to add luts in zhiyun transmitter please
Great video. Does the smart phone holder rotate easily, so you can point it up or down while filming? Thanks
Question with the Sony A7III, is it disabling the face recognition in 4K ?
Thank you
WHAT ABOUT THRE LIVE STREAMING FEATURE!?
It’s pretty cool but I wish that it can work with the focus pulling system so that you can pull focus on your phone!
Agree that would be the best! @zhiyun: firmware update please! :)
@@Manuelrehse You can do it!
@ how??
You can with the Zhiyun Play app, when you select the right setting in the Weebill it appears in the menu as a new item and you can control de focus from the app and even both zoom and focus separately if you install both motors
Even more so a comprehensive shot automation. So shot 1 is here, shot 2 is there shot 3 etc
Where can I buy the mounting plate at 1:48 ? Mine didn't come with that.
Bret you have been a great help thanks 🙏 I’m gonna have a great time with my new Zhiyun transmitter.
Awesome! Does this work with the Crane 2S? Thanks!
Hey great video! I have a question, when taking photos with the Sony a7iii and the transmitter connected to an ipad pro, is it possible the image to get saved automatically in the ipad the time I take the picture in the camera? so, let's say, if I am in front of my client, in the middle of the street, he could directly select his favorite photos from the ipad and I would send it to him straight away by whatsapp or email from the ipad. Thanks in advance.
What’s the best way to use & (wire up) with also having a Ninja V recorder that uses HDMI from the camera. Ninja V can record in 4K. I saw a somewhat similar question but the answer did not describe my question. Camera is Nikon z6. Very good video by the way 👍. Thank you for your help.
Thanks for making this video ,very professional and informative, what is the battery stated and can this draw power from the gimbal and subsequently charge the camera?. Just curious. Thanks and keep up the great content.
Any chance you can make a more comprehensive solo video on smart follow? I would LOVE to see it set up on a tripod and following a performance or person moving around a stage. Thank you.
What is the size of the small mounting screws that connect the transmitter base plate to the Weebill S? I've misplaced mine and need to get new ones :D
Hi, the mounting screws are 1/4 screw and socket head cap screws (CB2*4*4)
Hi, I am using sony a7iii, two things did not work for me. When I press record on the monitor, the screen goes blank and can not see the image. and second thing is joy stick on the monitor dissipated. What have I got wrong?
Did you get it to work? I been trying to connect my a7iii to the transmitter and the weebill s but when I plug in the HDMI to the camera the screen goes black and the app says that the item is not working correctly. I tried changing the settings of the camera to PC Remote etc and it still doesnt work.
Hi, there. I absolutely love the gimbal but I've had a nightmare trying to sort transmission with the Canon M50. It may well be that other M50 owners have solved or found a workaround for this problem. Basically, with the M50, the HDMI (micro - thanks, Canon) and the USB control port are not only too close together but on the wrong side of the camera altogether, as far as the transmission setup is concerned. The cables, when connected to the transmission module that can't be reorientated, will not reach the camera ports. The only way I can get it to function is ... wait for it ... backwards.
I've bought an HDMI full female to HDMI micro male, which has sorted out the video feed side but I don't know what to get to lengthen the cable that fits into the SS-USB port on the transmitter. When connected (backwards) to the camera, it's not a snug fit either.
From what I can gather, many different camera owners are having their own peculiar issues with the Weebill S and consequently it would be INCREDIBLY useful if Zhiyun and/or yourself could do brief videos for the gimbal for each model, even if that means we have to buy additional cabling. We just want it to work.
Cheers
Ugh - I just noticed I have the same problem.. Quite annoying because this is not something we can look into/ research before buying.. I've been sitting here for ages trying to figure out how to connect the cables. I have a Nikon z50.
@@hitessa I eventually found a flexible cable to sort this problem. It now all fits together but I still can't get the transmitter to work with my android phone.
Where is in the app 2:35:1 mode?
Can you film in 4k and still transmit the footage to a 1080 monitor?
My screen goes blank when I try 4K
highest output is 1080p, but internally in your camera will record 4k (if you set it to record 4k)
@@brian6622 1080p works fine.
When switch to 4K my screen goes blank on my iPhone but still recording on camera (SonyA7RIII) 😕
@@BboyEddy1983 wtf no sense in this transmitter then...
@@CHTFilms Yeah bit disappointing really 😏 I also bought zoom & focus motor which was also let down.
1:13 man!, whit that steady hand why you need a gimbal?
Because that's on a table with the stand 🤦♂️
I really like ZHIYUN products but the video uses a Sony A7 III camera. At time 6:18 I Shutter Speed, ISO, Aperture is mentioned. It's misleading because it doesn't work with the Sony A7 III camera.
will this system work if I connect the camera to atomos ninja v and from atomos to image transmission by HDMI and Camera to image transmission by USB?
Hi, could you please descript your question more clearly? I don't quite understand your question.
@@ZhiyunTechGlobal on the video, you have connected camera to the image transmission directly by HDMI and USB. my question is , can you ad Atomos between them to record on the external recorder and control gimbal by phone. Atomos has HDMI "in" and "out".
@@ZhiyunTechGlobal he's asking to explain no phone set-up [video time 9:58 to 10:06] with the new remote.
DO you sell the micro usb 3 to multi usb cables for Sony Cameras? I can't find them anywhere
@Zhiyun-Tech Thanks for the Weebill S, Excellent Design! ~ A quick question for you : If we have an external monitor mounted on the side to record and provide a visual (Ninja V5 monitor), can we still use thee image transmission system as a second source transmitting the image to a cell phone?? Basically having two monitors .. the Ninja V5 recording as a monitor, and then a cell phone connected using the Zhiyun image transmission system with the ability to use the Weebill phone app for video controls ?? Thank you in advance
When you use the tracking, can you move the object out from the middle or only in the middle?
You could choose and move the object you want to follow on the app.
Thank you
@@ZhiyunTechGlobal I tried using this feature and it didn't work at all, camera always gets really confused
I just got the Image Transmission System but there is no mini HDMI cable
me too - did you resolve the issue somehow?
danwelldon there actually was one more box I didn’t open with all the cables, didn’t think they’d be there
@@Adrelanine I have the box but there is no HDMI cable there - as per below it seems that it isn't included. I am trying to work out if it will function without it, otherwise it seems crazy not to included it!
@@danwelldon did you ever get this figured out or source a cable?
How to upload LUTs. It is a http link?
I just set mine up today with a Sony A7riii. I am having trouble panning with my phone. I only seem to be able to get a few degrees. Tilt works great and roll is a little crazy. But really I want to be able to pan and tilt for remote control especially mounted to a tripod or car. What do I need to change to make pan function?
You said for camera compatibility for the app, see details below.....erm.....where?
Check out the list here:
oss.zhiyun-tech.com/zyplay/instructions_edit/supportmodel/WEEBILL-S-Camera-Compatibility-List.pdf
Unfortunately Sony is pretty limited. Hopefully that might change with an update but I’m not holding my breath.
@@adriancolussi3138 it kinda sucks because I love their focus system and low light ability, but controlling Sony Cameras remotely is just a pain in the ass.
This is a Game Changer. I need it all.
Thanks for sharing. Is it possible to connect an external monitor+recorder with the camera that's attached to the Weebill-S gimbal? Does the gimbal have an HDMI pass-through cable?
Hi, I want to make sure...if I use my cell phone, download the gimbal weebill app onto the phone, and attach it to the phone, do I need the image transmitter. I have heard yes and no. Please clarify if you don't mind. Also, if my camera auto focuses in video, do I need the motor? Thanks for clarifying.
do I need the transmitter and receiver to use the Pilot. Or just the transmitter? Or just teh pilot is enough to steer the gimbal remotely? I plan to obtain the transmitter and pilot. But do not know if there is a need to buy the receiver also to use this pilot.
Hi, I have a Crane S and couldn't use the app control. Thanks for the tip with the setting on CCS in the crane menu
Hi great video but the video transmission feature not working for me nore the camera controls working with the gimble at all even though all the cables are connected. Phone app does get connected but still no control works aspect moving gimble around no capture button no video recording and no image transmission what's going on here I'm using canon r8
Does it work without a Gimbal? Only the Transmount connected to the camera to transmit the image and use the smartphone as a video assist?
Excellent review and tutorial !! Greatly appreciate it! ~ A question for you about the wireless monitoring and camera control feature ~ I currently have a Panasonic GH5 and always use the Atomos Ninja V 5 recording monitor. This monitor connects to the camera to serve as a larger viewfinder and also has the ability to record directly to SSD. I plan to get the Zhiyun Weebill S and was looking to see whether the image transmission system is required or not?? If I'm just looking to use the Weebill S as a smooth stabilizer gimbal, do you need the image transmission system for the ability to have the viewfinder even show up on the Ninja V monitor ?? I plan to use the gimbal for the typical features of smooth filming, without the need for controling the gimbal with my phone. Any idea whether the image transmission system is necessary for the typical viewfinder image to show up on the monitor that usually just serves as a larger view compared to the camera screen. Would greatly appreciate any insight ?? ~ Thank you
Hey Marc, in your case, the image transmission system is not required if you have already got a monitor and have no needs for controlling the gimbal with your phone!
Thanks for the video. So I don't get a live video feed for the Panasonic cameras? EG GH5s
Hi, thanks for the video, tell me do you know if the Zhiyun crane 3s Transmitter model COV-3 would sync with the older Receiver COV-2 model
Will there be an update/ usb c support for the a6700? I just upgraded and the image transmission no longer works
I have a question. Can you pull focus with this gimbal and the focus weel without connecting the focus motor like you can with the dji ronin sc or do I have to use the motor all the time. I have a Sony a 6400.
Hi zhiyun
I have a problem with my weebill S
for a week when I turn it on, it turns on but the motors do not react. I don't know if you have any advice for me.
Thanks
I Definitely will purchase the unit for my gimbal S.
Maybe a daft question, but I can't find clear information on it. The Image Transmitter can send 1080p 30fps to smartphone. Does this mean one can only make films in this quality or is it still possible to record on the camera at say 4K?
Excellent.
I´d like to know if there is any way to connect it to a swticher (Atem mini 4 example)
Thank you for this clear and very helpfull tutorial.
I bought the Weebill S Pro Package, including this transmitter. Inside the transmitter box, the transmitter mounting plate us missing.
Do you have an idea where I can buy this mounting plate?
Thankyou on advance.
Hi there! Please contact this email to purchase this part: info@zhiyun-tech.com
Hi, is this a different one: Zhiyun COV-03 a new and optimized one? Thanks
It can do multiple transmissor to a single receiver?
Why on your site you don't talk about the new model (TransMount Image Transmission Transmitter 2.0 ) and there is no comments on RUclips. Also, why can't I find the Receiver on Amazon.
Since the controls of the Weebill-S are not working on my Fujifilm X T20 - I guess that this module will also just provide the plain picture transfer and nothing more. Am I right?
Awesome video! Are the transmount image transmitters the same for the weebill and the crane 3s? I want to get one for my crane.
Nothing about live streaming? I got it to work with youtube live (via the custom stream) but can’t get it to work consistently. FB live doesn’t work at all.
Since you're having problems with it being consistent, this is probably why they're choosing not to speak on it. But why advertise in the 1st place if the feature isn't ready?
I have a question about the weebill S with transmitter and a Sony a7R3. My Camera follows an object, but it is not focused/sharp. If the Object changes the distance it becomes blurred.
AF-C is set.
I would be very happy to hear from you.
What are the settings on the camera? I have the same setup using a7iii but I always receive “the device is not working, please restart and connect again”, also my camera screen goes black after plugging in HDMI cable.
I'm having the same issue with my a7iii too, I'd really hope that zhiyun reps could respond. I got the image to come through and have set the gimbal camera to css, but have no luck in controlling the camera from the gimbal when image transmission is on. If I dont use image transmission then I can set the camera on the gimbal to pano, or canon and then it allows camera settings control. Please reach and help if anyone can chime in.
I have the same issue. A7iii and no camera controls with image transmitting. Without image transition I have the controls via the gimble by selecting pano instead of ccs. Has anyone got this working yet?
Your enthusiasm makes this sound simple. It’s not. I’m using a Canon M6 MKii. I can get the Weebill to connect through the ZY app and, once, I actually got an image to come through the app. Woo hoo! But, I then tried follow focus. I was able to tap my phone screen and get the autofocus brackets. then, I moved. Nothing. No follow. The Weebill-S didn’t move.
Here’s my main question: Why is it that when I connect the gimbal to WiFi, I’m unable to connection the image transmission module to WiFi? I keep getting an error message that says the transmission unit requires a WiFi name that is formatted in a certain way (which happens to be the way it is actually formatted)? Does this having anything to do with why I seem to be able to control the gimbal through WiFi, but I get no action from the image transmission unit? I hope someone answers because I’m getting ready to blaze my Amazon review.
You mentioned in the video that you'd include a list of compatible cameras in the description. Just thought I'd jog your memory. Great video btw
Hi I've setup the gimbal with the transmitter. We can get the control to the gimbal to work via bluetooth. However, we cannot get the wireless transmitter to connect to the phone. When we connect to the transmitter, the wifi indicates there is a "limited internet connection". We cannot can any videos or image. What is wrong?
For canon 80d, is it the micro to mini usb cable for connecting the camera to the transmission module, and not "another" multi-port to mini usb cable (which is not included in the packaging). I asked this because in the module, the port is for multi-port type cable, and there is no included multi-port to mini usb cable included in the package, that is why it confuses me. Or, the micro usb can be plugged in to the multi-port of the module, and not lose any feature (e.g. Smart Follow)? I hope my question is clear. And, 2nd question, for canon 80d, is it mini-hdmi to mini-hdmi for connecting the module to the camera? Thanks a lot.
Where can we find a list of cameras that are supported? I've a FujiFilm X-T3. Google isn't showing any links available on this; neither on Zhiyun's own product listing.
Followed your instructions exactly and got everything up and running with my Sony A7iii. However, when connected to the image transmission module, the only way I can start/stop recording is via the button on the screen app. The on-gimbal red record button no longer functions. Did I miss something in the setup?
Jeff Burrows I have it set up with Sony a6500 using the exact cable he plugged from the camera to the transmitter in the video and the record button in the gimbal works. The 002 cable won’t work.
Hi.
This only works with the zhiyun stabilizer ?
I have a Ronin S. can I work with this transmitter?
Does receiver comes with the transmitter itself, if I'm buying the device separately not the gimbal?
Is it only compatible with Weebill-s as I see you connected the transmitter through some cables with the gimbal it self was that only for the charging purpose?
The battery life is 1.5 hours. If the transmount is connected to the gimball. Is the battery life longer? If yes, how much?
Thank you
Hi thanks for the tutorial. I have a problem with the transmitter. When every i push the record button, My phone screen turns black and i can't see my footage on my phone. And also my screen is not full. I am using a6300. If you can help it would be really nice.
I didn’t see that but I hope you can control the focus from the app (at least from the zoom motor but ideally also from the lens motor for AF lens) ? Otherwise seems like a major missing functionality
hello zhiyun, I bought a combo pack of the weebillS but I cannot find the WiFi of the transmitter with my phone. I am using a REDMINOTE9PRO. if you have a tip please give it to me
My EOS M50 connects to my iPhone through the Bluetooth without any extra devices. What is the advantage of using this transmission unit?
Hello. Quick question. When we output video thru hdmi on a7iii aren’t we losing auto focus with this setup? Thank you.
Can I use my GH5 with this transmitter system and do I get all the cable that is compatible with my GH5
Hi ZHIYUN i'm wondering if the transmission is the reason that I no longer can connect to my Wibill lab with my phone. (i don't have this new transmission)
Is it mandatory to connect the module to the usb connection of the gimbal ? because the module has been already charged before the use. Thank you
Yes, you need to use cable connect transmitter with your camera and gimbal.
Hey brad, when connected to my phone I get interferences every 7-8 seconds for about 1 second. Im close to the transmitter and on the latest version. How can I avoid that? Using a sony a7iii and a samsung m30s as a monitor .Thanks
Hi Brett, hope you are well. I can not find the information that I am looking for on Zhiyun web site. It’s a nice looking website but not customer friendly. Can you tell me has Zhiyun updated the software or hardware for the Webill lab so it transmits with the Fujifilm XT3? I have almost Abadan using the gimbal due to my frustration. Other gimbals are easier to deal with. Please advise. Thanks!
Hi, does it connect and works with Fuji X-T3? Thank you
I'd like to know too!
Watched another RUclipsr which confirmed this works on the XT3. 💪
@@williamlee7782 which one ? can you link me pls
@@abineshsrinivasan2638 sorry. That was such a longtime ago.
Can live video be transmited to the ZY Play app without the Transmission System ? Just by connectin the camera to the weebill with usb cable and phone to weebill by bluetooth ? I see that on the LAB version it is done so, but I can't seem to get it working on the weebill-S.
Do you think the Weebil S can hold the Fuji XT3 and battery grip with Sigma 18-35 1.8?
Hi, so may i use my big screen phone as camera monitor ? its more cheaper solution than buying external monitor isnt it ?
is there a wireless focus control?
I would recommend getting the Tilta Nucleus Nano for non cine lenses. It's worth the price and is independent of which device you place your camera on, be it gimbal or tripod.
Hello, I would like to know if the motion control in ZY Play app is available also for mobile stabilizer as Zhiyun Smooth Q or Q2.
Best regards
Paolo
Can you use the app for the focus motor? For a focus puller?
How is the performance of the new image trasmission module 2.0? Maybe it is a stronger reliable hdmi transmitter that can be used also stand alone without the gimbal? Something like hollyland tramsitters?
I have about 5 days Image Trasmission module 2.0. Crystal clear is probably exaggerated, but the video transmission is much smoother to iPad than directly from the camera.
My Nikon has an usb superspeed conector... and no usb superspeed to usb superspeed cable is provided... any thoughts?
Hi there, I was hoping from some help from you. I recently bought the image transmitter. I am trying to connect to a Canon EOS R. The transmitter firmware has been updated. I connected the unit with both the mini hdmi to mini hdmi and the USB-C to Micro B 3.0 which are both brand new cables. When I connect the cables to the camera and turn transmitter on I get an ERR code on my camera. Any ideas of how I can fix this problem. I greatly appreciate some feed back. Thank you.
the first time I connected the transmitter it worked perfectly now it's giving me a your device isnt working and wont connect to wifi...any solution for this issue?
im interested in using the object tracking feature in the app and I want yo know if there is any compatibility issues between this module and the weebill LAB since I need the gimbal to track an object. thanks
i do notice the the micro pug it's a bit short respect the HDMI cable i do use for connecting my sony to the external monitor ! Could be this the corse of the no HDMI on the app and the red led ?
updated the image transmission and weebill s firmware. now ive lost many functions in the drop down menu when using the transmission unit....... why?