Terrific overview of the tool, thanks for taking the time to make these videos as they are very helpful. I saved this for later in my cart at Amazon it was 1399. Then a week ago there was a 250 coupon so down to 1149 but held off till yesterday, Prime Day it was 1049 and got it. This morning it’s back at 1149 with the 250 coupon.
Go with a US make and model scanner if you have older American vehicles. For example neither my 1999 F-250 PowerStroke 7.3 nor my 2001 Dodge Dakota are supported by xTool with no data profile update in sight.
@@johnjauregui3528 Those should be supported but they may not auto detect, you have to manually input year make and model. That is a limitation of the manufacturers module.
@@737mechanic "Should be" but are not either by auto detect or manual. Clearly you don't speak from experience. Try a 2001 Dodge Dakota or 1999 F-250 7.3
@@johnjauregui3528 Your right I don't speak from experience as far as those exact vehicles but the experience I speak from is on vehicles before about 2000 a lot of makes and models will not autodetect with any scanner and I have seen people think there machine will not work because it isn't auto-detecting the vehicle but the reason they don't auto-detect is because the manufactures did not program the modules so they could be auto-detected. Did you send a report to xtool letting them know the problems so they can fix it?
@@johnjauregui3528 It depends on make and model. That was around the time when manufactures started programming their modules so a scan tool was able to auto detect the year make and model before that you always had to enter the year make and model manually on all scan tools. My first scan tool was a snap on MT2500 and there was no auto detect on any car.
For IMMO this scan tool has the best support than any other scan tool, the only thing better for IMMO is a dedicated key programmer, Ford module replacement yes. GM and dodge is year make and model specific.
No, this scanner is NOT auto auth compatible. They make an IP919 that is auto auth compatible, but it is not available on Amazon for some reason. Launch makes a comparable scanner that is auto authority compatible here. amzn.to/3VQ09I8 Remember to be able to use any scan tool on Chrysler products after 2018 you will need to purchase an auto authority 1 year membership for $50 and have a scan tool auto auth compatible.
@@SMOKEY-JAYS-DIESEL When I received the Xtool D9S Pro I was under the impression that all Xtool D9 scanners were AutoAuth compliant so I emailed xtool and they confirmed that the the D9 Was NOT autoauth compliant and they told me that the only xtool scanners that were are the IP919 and the IP900.
Yes, the $3500,00 Autel IM608 is a dedicated key programmer so it should program all cars at that price. The $1000.00 D9S will program many more keys than any other actual scan tool plus has more active tests and special functions than the IM608.
The D9S Pro is normally $1399.00 but it is on sale for $1099.00. amzn.to/4eQgFAM The regular D9S is the same price but it does have a $250 off coupon it looks like which brings it's price down to $849.00 amzn.to/4bDf3Hz
XTOOL D9S PRO Diagnostic Tool with BMW, Merc, Audi, and VW programming and coding.
amzn.to/4cqX3la
XTOOL D9S Automotive Diagnostic Scan Tool
amzn.to/3RVYhwC
Terrific overview of the tool, thanks for taking the time to make these videos as they are very helpful. I saved this for later in my cart at Amazon it was 1399. Then a week ago there was a 250 coupon so down to 1149 but held off till yesterday, Prime Day it was 1049 and got it. This morning it’s back at 1149 with the 250 coupon.
Good job, I always buy high thinking I got a good deal only to see the price of whatever it was dropped the week after I bought it.
Xtool is one of the best diagnostic tool nowadays! Really fast and no single problem.
Can the D9S Pro Scan tool be used to program a key for a VW e-golf?
It will do some VW's but I am not sure about the e-Golf.
Perfect! Well done, will be ordering!!
What type of features are available for Mercedes Sprinter vans? Chassis 906 and 907.
Go with a US make and model scanner if you have older American vehicles. For example neither my 1999 F-250 PowerStroke 7.3 nor my 2001 Dodge Dakota are supported by xTool with no data profile update in sight.
@@johnjauregui3528 Those should be supported but they may not auto detect, you have to manually input year make and model. That is a limitation of the manufacturers module.
@@737mechanic "Should be" but are not either by auto detect or manual. Clearly you don't speak from experience. Try a 2001 Dodge Dakota or 1999 F-250 7.3
@@johnjauregui3528 Your right I don't speak from experience as far as those exact vehicles but the experience I speak from is on vehicles before about 2000 a lot of makes and models will not autodetect with any scanner and I have seen people think there machine will not work because it isn't auto-detecting the vehicle but the reason they don't auto-detect is because the manufactures did not program the modules so they could be auto-detected.
Did you send a report to xtool letting them know the problems so they can fix it?
@@737mechanic Which ones before 2000? That might explain a lot.
@@johnjauregui3528 It depends on make and model. That was around the time when manufactures started programming their modules so a scan tool was able to auto detect the year make and model before that you always had to enter the year make and model manually on all scan tools.
My first scan tool was a snap on MT2500 and there was no auto detect on any car.
Excelente equipo,de lo mejor multimarca.Saludos
Basically D9S & D9S PRO are just similar except online ECU coding for few European cars.
Yes, The D9S is about $250 cheaper than the Pro but right now the Pro is on sale.
D9S Pro amzn.to/401ureV
D9S amzn.to/3UcTAj4
@@737mechanic
So it’s better to just buy D9S because it’s way cheaper?
@@adams6798 Yes
Tell me sir can the Kc501 work on the D9S pro?
yes
Can it be use in malaysia ? Cause i found that some scan tools have ip restricted.
It should because this is a global scan tool.
Would this unit be any good for chev, ford, dodge, Toyota for model programming or immo
For IMMO this scan tool has the best support than any other scan tool, the only thing better for IMMO is a dedicated key programmer, Ford module replacement yes. GM and dodge is year make and model specific.
will this xtool diag and clear codes for newest dodge vehicles?
No, this scanner is NOT auto auth compatible. They make an IP919 that is auto auth compatible, but it is not available on Amazon for some reason.
Launch makes a comparable scanner that is auto authority compatible here.
amzn.to/3VQ09I8
Remember to be able to use any scan tool on Chrysler products after 2018 you will need to purchase an auto authority 1 year membership for $50 and have a scan tool auto auth compatible.
@@737mechanic actually it does work on the newer Dodge ram trucks and cars. You just need a bypass cable
@@SMOKEY-JAYS-DIESEL That is correct. The problem is accessing the module can be a real pain.
@@737mechanic yeah it is a pain in the 🤷🏻♂️😂😂
@@SMOKEY-JAYS-DIESEL When I received the Xtool D9S Pro I was under the impression that all Xtool D9 scanners were AutoAuth compliant so I emailed xtool and they confirmed that the the D9 Was NOT autoauth compliant and they told me that the only xtool scanners that were are the IP919 and the IP900.
Does this work on Buick encore
Yes, it will work great on all Buicks.
hi good jop . Can he xtool ds9pro make the unit ecu tcu pcm ecm a virgin as is the case in autel maxis
It depends on the year make and model. I believe the same goes for the Autel also.
@@737mechanic good thanks frind
What happened to Gm? BTW the gold standard for key programming is the Autel im608 it does everything that xtool does and more that’s why it’s $3500
Yes, the $3500,00 Autel IM608 is a dedicated key programmer so it should program all cars at that price. The $1000.00 D9S will program many more keys than any other actual scan tool plus has more active tests and special functions than the IM608.
Will this scan tool work on the newer Dodge vehicles 2023
No, this scanner is not autoauth certified but the launch x431 Pro3 ACE is and it is a little cheaper and has equivalent functions.
amzn.to/3zAHqZH
With a security bypass cable it works awesome
Is it available in Amazon? How much price? Thanks
The D9S Pro is normally $1399.00 but it is on sale for $1099.00.
amzn.to/4eQgFAM
The regular D9S is the same price but it does have a $250 off coupon it looks like which brings it's price down to $849.00
amzn.to/4bDf3Hz
@@737mechanic thank you
Is it better compared to IP919?
They are the same except the IP919 is autoauth compatible.
@@737mechanic which one should I go for?
It is available at AliExpress?
I am not sure.
It is available
Yes but prices not much difference
HAVE YOU TRYED POWER BALANCE ON THE JEEP? and what are updates fees thanks good report
I have not tried to do a power balance on the jeep yet. The update for the D9S Pro is $350.
hello sir ..can i have your email or whatsapp i need some help with the d9?
maybe I can help you
@@陈陈桑 email?