The DJI RS4 Is Weird…
HTML-код
- Опубликовано: 8 май 2024
- Thank you so much for watching!!
/ brycekoebel
My Luts: ko-fi.com/brycekoebel/shop
My Gear List: amzn.to/3lKUvsr
Beginner Gear: amzn.to/3YzLQYs
Platforms I use:
Best Music for Creators: bit.ly/48sWpBz (get 2 extra months free)
All-In-One Platform for Creators: bit.ly/3ROefbf ($50 off with link)
Check out Dehancer Pro Tools and use code BRYCEKOEBEL for 10% off!
www.dehancer.com
If you want to check out my other social medias or support my channel, head over to linktr.ee/brycekoebel 
Кино
I'm from Brazil and I just bought my RS4, I noticed the same problem, my setup is Sony Fx30 with the 17-70 tamron lens. Thanks for sharing!
about the tightening of the knob on 9:34, pull it outwards, set it back to a position that it's free to move, and push it back in. Now you can tighten it. It's a common way these knobs are made, in dji and other brands too. I felt like fool when I figured it out :)
how do people not figure out such simple stuff im baffled
I think rs4 is not the upgrade of rs2. DJI rs4 pro is the upgrade of rs2. They had terrible naming going on back then and they have fixed it with the launch of rs3 series.
Comparing to the RS2 you would be looking at the RS4 Pro
Yeah I know but it doesn’t make sense lol
@@BryceKoebel What doesn't make sense? When they released rs3 they split into two options, one for less professionals with less weight. If you want to compare, you compare the higher end RS4 pro with the RS2 because they are in the same weight class. 10 pound vs 10 pounds you are comparing two different models.
@@BryceKoebel RS2 is predecessor to RS3 Pro and RS4 Pro. RSC2 is a predecessor to RS3 and RS4. You are comparing two products from different lineups, so no wonder they are different. Anyways thanks for your review.
I have the same problem, arm extended all the way but still falling over toward the left. What I would do in this situation is to keep your original rs4 plate, buy some cheap 20g weight and attached it the right side of the ronin arm. This way, it can counter balance the rig.
I just wish it didn’t have to be that way 😭
yes, vertical mounting was made for very simple setups. Just a camera and a lens. No cages, no extra base plates, no motors. Of course it's not marketed like that... anyways.
I have the rs3 pro, and the only upgrade I find useful is the new lidar focus pro system, that is fully backwards compatible with rs3 pro and I can use it independently too. Rs4 and rs4 pro are really like 3.5. Minor upgrades compared to rs3 pro. But the focus pro is impressive.
DJI rebranded their gimbal lineup after the RS2. The reason being the RSC and RSC2 stood for compact, however they still could support a decent setup. They then released the RS3 which was now their "not as professional solution." Hence the name, RS3 Pro. Knowing all the gimbal models and their direct upgrades should help. RSC2 -> RS3 -> RS4 and RS2 -> RS3 Pro -> RS4 Pro. If you enjoyed the RS2 so much, it sounds like you're going to need an RS4 Pro or else you aren't upgrading. I have the RS3 Pro and its amazing, but I do shoot on larger cinema cameras so I didn't have much of a choice.
This whole paragraph just proves my point lol
@@BryceKoebel No? You HAD a pro version and then bought a newer non-pro version and expected it to be a direct upgrade. Obviously they aren't going to make the cheaper, non-pro product better than their pro line. That's like buying an iPhone 15 after having an iPhone 14 Pro Max and expecting it to be better just because of the higher number.
Im not sure about the rs4, i have the rs3 pro and for the thumb screw issue. I think most should have a ratcheting system. If and when it gets stuck, pull the thumb tab and twist the opposite direction, push back in to re-engage, and continue to do so until it is tightened.
Insights were super useful and great video.
I did have a question about your lens and focus moter. Whenever i zoom in, the lens extends obviously, but that throws off the balance, making me have to re balance every time i change the Zoom. Was wondering if uv experienced this issue or have any work arounds.
Lastly, the "NEEWER RS3 Vertical Camera Mount Compatible with DJI Ronin RS3 Pro RS 3 RS 2 Gimbal Stabilizer, 1s Quick Vertical to Horizontal Switch Anti Drop 180° Rotating Base."
Its on Amazon currently unavailable but something to look out for and to do some research on.
Thanks for sharing your experience 👍
I upgraded from the RSC2 - where I mounted my A7S3 by adding the plate to the side of the camera and it balanced fairly well! Then I got the RS4, and it didn't work with the cage.... So I returned the RS4 and downgraded it to the RS3, with the $60 attachment for portrait mode - as for me I don't need to switch between horizontal and portrait whilst on a shoot, and if I do, I've just invested in the Falcam ecosystem, which allows me to pop off the camera straight of the gimbal, and add a handle on within seconds, to then go horizontal if I really need it.
Great video and I think more people need to watch this! I searched so long for a solution before returning the RS4, and I only saw this pop up on my RUclips page today!
Hi - I also use the Falcam F38 clips, If I buy the RS3 what would I need to buy to use on the vertical plate. I shoot 90% vertical now, so I wouldn't be changing back and forth that often. Could you leave any links to what I would need top order, that would be a big help - thanks.
@@markshirley01 Hey Mark, so what I ended up buying was 1) the official vertical mount from DJI Roughly £45 here in UK. 2) Ulanzi Falcam F38 Quick Release System. So this goes straight into the vertical piece, and then the camera goes straight into the 2) mount. Literally saves about 1-2cm's of space, as that was causing the RS4 to tip over to the edge. Hopefully that makes sense. But both those pieces, literally means that my camera with cage + 28-75mm zoom lens with an ND balance effortless!
@@ridhish.visuals so you bought a RS3 then bought the DJI vertical plate which you added a Falcam F38 plate to. Is that correct.
Only thing is looking online the RS3 with the vertical plate costs the same as the RS4. Seems crazy to buy the RS3 at the same price
@@markshirley01 So if you were to buy the RS4, you'd still need to buy the vertical plate, so its infact more of an investment, the F38 mounting plate, was for me an extra, I don't think it's necessary for it to work, but it sure does make it easier to use + a lot lighter as you don't have to add another mounting point to the cage.
The F38 plate is actually really nice because the quick release is a lot easier than the stock one that comes with the RS4. So it’s totally worth the investment in my opinion.
what type of shoulder strap you have attached to your gimbal during operation in the b roll
It's made by Smallrig! www.amazon.ca/SMALLRIG-Weight-Reducing-Shoulder-Compatible-Release/dp/B0CFXKKK5F/ref=sr_1_6?crid=3O1MR2KTKL0IX&dib=eyJ2IjoiMSJ9.nSvKCZ5SeaCyIk9Fa35oMs1RMKnHe_mKYB029GCvho-sMieV3Zn2VTPdm_Hfvah2pORYwMx_VwXBdxpvB4cjWv5nWpJBOlS8096Od16B3A9-JsoTXkfnhvsEJZKC8wZhThYqNVcn1IErVQYLeS4JoafR6NXAy-LC6Mti8qf4vMtPwIpyqDZpGet8g9WbSJr407E19OB944DoeYWbym-c_DL328IKrUTA8pzxkgeBbOiuptOJh1WZP1cvuJSHp61gfKyYFWN3H2eJnzUnN9c01ieQb4PuCZzF9ZQx1T-4AGY.g_MpE3TaJ-jTeVrzHVorpWvAj1-h7yfGdgqyARxW-ro&dib_tag=se&keywords=smallrig+shoulder+strap&qid=1717005591&sprefix=smallrig+shoulder+stra%2Caps%2C173&sr=8-6
bro! i just bought this today and I am a fx3 with cage user and have also been using the Rs2 pro since its release...and I am probably sending this thing back tomorrow because of all of the same things you're saying...there is one other thing which is a major problem which you didn't mention...which is actually what led me to your video because I'm trying to find a solution. On the RS2 Pro if you have the original focus motors that it came with...i used to use those for zoom and a feature it has is SMOOTHING on the focus motor in the gimbal menu! Why in the world do they not have this one the RS4! The zoom now is terrible! Anyway...glad I'm not the only one thinning this gimbal is a bit of a downgrade or at least not much of an upgrade from the RS2 Pro.
this is really a helpful vid nobody is talking about this issues it is really a problem with all user that uses a cage with their gimbal
Had the rs2. Hated it. Got the rs3 pro love it. I don’t see a need for the 4. Also you film for funkanometry? Dope!
Yep the 2 messed up the lineup because it had the rsc version. The pro is the one you want. The non pro version is pretty good though. Great for keeping the setup light but it's not very good for vertical setups
I still like it! Does the job
@@BryceKoebel yep, you will love the 3 as well, I went for the normal 3 as my rsc2 broke 😭
I wish there were more competition in this space. It's always seemed to me that DJI doesn't listen to feedback from users and there are always little (but painful) shortcomings in their products. They're good at innovating, but even with innovation, they could really listen more to their customers. I've had a cobbled together RS2 Pro rig since it launched and I won't upgrade until they pay attention to what's actually needed for good simple robust workflows.
100% agree
arent the screws ratcheting? im sure they are on the rs2
Thanks great reveiw. I am planning to sell my rs3 mini for Rs4. Does using the focus motor with a zoom lens to zoom cause the gimbal to become unbalanced?
It feels tough to balance because you’re at the max weight. But it works
My RS3 is rocking solid!! I'm loving it. No need to upgrade to RS4.
Hi Bryce - I use Falcam F38 clips, will I be able to use this clip with the vertical plate on the RS4.
I am not 100% sure as I do not have the F38 anymore!
Hey man how's it going. I'm an Rs2 pro owner as well.
Yes unfortunately the Rs4 basic is not an upgrade to the Rs2 pro. The upgrade is the Rs4 Pro unfortunately which as you stated you don't need because of your workflow so at that point I would say get the Rs3 pro used and you would be better off.
I really loved your insight on your challenges and such.
Personally I've owned the regular Ronin, the Ronin SC and now I'm on the Rs2 pro and I don't see I need to upgrade and I should 4
20% music videos, 40% interview and story telling content and the rest sports and a mixture of everything else.
As stated I definitely think the Rs3 pro is your best upgrade path. I hope you find what works best for you.
Can't wait to see that video.
A lot of tears going down - but i totaly understood you, and just go with the gimbal to it's death. I switched from RS to RS2. There was a lot of cool upgrades but i think more dump new issues and problems they produced.
So the pro doesn't have this issue?
I almost bought so THANK YOU for saving me money. My RS3 Mini broke and I dont have a gimbal now...
I just got my hands on RS4 but I totally agree with your review. 👍👍
those dancing videos are sick man
Thank you 😊 🙌🏻
dude, you comparing on two different class dude !!! make it 10 pounds against 10 pounds!! LOL
checking in ;D
ya I don't like playing the Dji dancie dance, to play the game so you can upgrade T_T
Let me get this straight you don’t understand how companies branded their products and it’s their fault
Nailed it
Get a cage with A Swiss on the bottom, problem solved
you obviously didn't watch the video lol
Return this and get a used RS3 Pro. ;)
I honestly should 😭
Pro....
Pro?
4 pro