Setup the ATEM Mini Pro to Live Stream
HTML-код
- Опубликовано: 21 июл 2024
- To Stream you need Cameras, Audio, Remote Control all that the ATEM switchers can provide so you can Produce an excellent LIVE Stream for your Church or Event!
Email me with your streaming Questions or share feedback on my videos. Leave a Comment, or Send me an email! CrazyAmazingNathan@gmail.com
Resources:
Would you be interested in the Personalized Training that I do over Zoom? Book a session today. www.crazyamazingdesigns.com/t...
Did you know? I offer Personalized Training, Production Consulting/ Coaching. All the info can be found at www.CrazyAmazingDesigns.com/production-consulting-training
*Quickly set up a new computer with my ProPresenter 7 Template.
Includes Multi-view, +Pre-Built Looks, Themes, Sermon Lower Thirds, and Macros to control it.
www.crazyamazingdesigns.com/s...
00:00 - Using the ATEM for Live Streaming
00:36 - Let me Help YOU do Production with Excellence!
00:47 - Choosing between ATEM Mini Pro & Extreme Switchers
02:44 - Using the ATEM Control Software
03:34 - Connecting PRO Audio to the ATEM Switcher
06:14 - Connecting Camera Inputs via HDMI or SDI to ATEM
07:03 - Check out my other Videos
07:24 - ATEM Graphics with ProPresenter 7
08:06 - Using the ATEM Streaming Encoder
10:06 - Using the ATEM ISO Switcher to OnePush record to SSD
10:31 - Thank You for Watching | Please Subscribe!
I use an X32 full board as my mixer, i also have a gopro 12 & an insta 360 ace pro along with 2 android phones, i'd like to live stream my bands rehearsals via Facebook & or Twitch, will this switcher work for what i'd like it to do, & if so, maybe a simple explanation on how to connect all this, thank you
Thanks for the helpful tips. I'm creating a checklist and your video sounded like a good start. Just one question though. I understand that the stream quality setting does NOT impact the recorded video, only the streamed quality. I think USB-C to a solid state disk can get about 70mb/s instead of about a tenth of this. I'm pretty sure it was in an Alex Pettitt video he claimed he'd incorrectly stated the stream settings impact on recorded video, but worked out this wasn't correct. Anyway thanks again - nice job
Hi, I'm not sure what Alex said, but These ATEM switchers only have the single encoder so whatever settings you choose, those same quality settings apply for Streaming and the SSD recording. That means users can't record in the best quality possible to the SSD, and then stream in a lower quality because of bandwidth issues. -Nathan
I have a question in our church we use two computers one for OBS and other one for pro presenter. With the obs with project the cameras on the lateral screens but on the main screen we can’t put the cameras. What can I do to be able to project cameras in the main screen .
Hi, If you'd like to show cameras on the screens I'd suggest using a Hardware Video switcher such as the ATEM Mini Extreme, or the ATEM Constellation switcher. Bring in the graphics and cameras to the switcher, Then send the ATEM output to the screens. Basically, build the Live Stream Locally, then use that on the screens. Don't try to create a separate feed. If you used the constellation switcher, you could bring in ProPresenter, + cameras, then send output 1 to the side screens, and output 2 to the center screen. Now you can use a StreamDeck to switch between showing cameras, and ProPresenter on each screen being fed from the switcher. -Nathan R
Hello, it is possible to connect 4 webcams instead of 4K professional cameras?
Only if the cameras have HDMI Video Out. The ATEM can't switch between digital sources. It sounds like you could use OBS and a StreamDeck controller to do what you want. -Nathan R
How do I feed my chameye controller into my ATEM mini pro? They are on the same network?
Hi! You can use your Chameye Controller to control the motion of your PTZ cameras. But you will have to run HDMI cables from the cameras to the ATEM switcher to input signal. Note: if you are going more than 10ft, you will need to convert the HDMI signal to SDI and then back to HDMI to connect to the ATEM switcher. -Nathan R
Using Mac for Restream, connect with USB C back of ATEM blackmagicpro. Using 2nd monitor to display all the plugins at same time. How do we connect a Projector to a screen {noTV} up front {needs the INPUT} on ATEM?? 2nd PC is Windows using as PREVIEW shot. Where should we plugin all to back ATEM? Help?
Hi, So you are sending the ATEM Program feed to the computer via USB-C for streaming with Re-Stream. Then you have an input to the ATEM Mini Pro from a computer, and I'm not really sure what the issue is. Can you share more? :) Thanks! -Nathan R
@@CrazyAmazingDesigns ATEM hooked up to MAC via USBC, 2 cameras, mic, MONITOR full plug in screen, 2nd windows PC for in-house videos, does the projector go to the ONLY "OUTPUT" HDMI CONNECTION? Where do I plugin the 2nd PC Windows ? Where do I plugin the MONITOR showing all the full screen Preview, Program, Cam 1, etc pages ? Need to know where to plug everything in. we lost the INHOUSE video when we switched to RESTREAM & quit using the QUICKTIME in the MAC for inhouse video... what are the MAC connections when using ATEM Blackmagic PRO? and where should all the other connections go when using a PROJECTOR & not TV for OUTPUT inhouse
Hello, I'd love to dive into this with you but this sounds like a larger conversation than we can practically have inside this RUclips Comments Section. If you are able to book a Zoom Training with me, I can get all of your questions answered. With a couple of sessions we could probably even get things working how you'd like. Crazyamazingdesigns.com/training -Nathan R
@@CrazyAmazingDesigns i will get back with u heading to church now, to review all plugins again