DIY Power Hammer TOOL! METAL SHAPING Pull Max CHEAP & EASY BUIDERS KIT Step By Step
HTML-код
- Опубликовано: 17 янв 2024
- On this episode of Make It Kustom, I BUILD a power hammer tool. Follow along to learn how to make your own sheet metal profiling tool.
GET THE KIT! Free Shipping!!! Can &US ⬇️
www.japhandskustoms.com/produ...
PATREON LINK / makeitkustom
Stretcher tool Video
• EASY 2 MAKE! DIY STRET...
Join this channel to get access to perks:
/ @makeitkustom
MERCH STORE www.japhandskustoms.com/shop 
Авто/Мото
Elio is so attentive. He's the best bro a guy could have. You both seem to work well together.
You’re one of the only guys on RUclips who actually purge till the red goes away like you’re supposed to!!
The thing I'm most impressed with is how quick you took this from original concept to ready to ship with videos and editing. I bet you're putting in 60 - 80 hr work weeks often.
Or he's making the videos over a longer time and releasing them when it us advantageous to marketing the kit.
At least this one is reasonably priced for what you get. He had some items in the past that made you wonder if he was crazy. They seem more reasonably priced now too though.
Same.... pretty wild.
My question is why make a diy kit that already have the holes cut out but now you gotta drill ontop of the existing holes lmao.
@@Bmanfresh In my experience the profile cut holes don't leave a clean edge, on the drawing for the profiling I normally make the holes slightly undersized, then drill them to to exact size after for a cleaner finish and more professional end result. (You could skip this step entirely and make the the holes slightly oversized). Having said that I will still follow those steps for the tapped holes or you could damage your taps on the rough edge of the profile cut holes. Hope that makes sense.
I am 1:30 into this video and feel like the channel has just achieved a new level of success. Congrats, Karl! Very well deserved.
Probably help if you drilled 12 shallow blind dimples in the side of the dies to allow the set screws to hold the dies more better in alignment and more user friendly.Wicked robust design ,I like it. You could even design a set of dies to tip by gradually starting flat and then twist into a 90 degrees all in one pass.
Hi from Wales UK Karl
All I can say is thanks mate you are awesome after watching the make it video I went to the metal stockist and got 3 x 1ft square 6mm thick sheets and started building it the foot
wide gives me an extra 3" in the throat and I had all the rest of the bits in my scrap bin and a spare air chisel already
I went straight for the planishing hammer idea you mentioned polished one of the hammers and a lump of mild round bar and it works like a dream produces a beautiful polished
finish tomorrow I start on the arm and dies to make the shaper attachment want to make a joggler die and already thinking of an adjustable fence to fix to the frame
Again thanks one of the best channels out there
That’s awesome! I’m stoked that you’re building one Jason there is so much that could be expanded on with this simple design and excited to see what you come up with!
This is Awesome guys. That's it I am making one. Dude you can go into manufacture with this tool...amazing...from South AFRICA
You should make a kit like that for your bead roller. I think it would sell well and it would fill the gap between a hf roller and a Mittler Bros. I also like the fact that it uses the 22mm dies.
With your skill set you could do well offering weld up kits like Swag Off-road does.
Thanks that’s a great idea! Yea it’s looking like this would be a great way to help get more people into capable metal shaping tools for less money
So cool to see you continue making useful tools for all us fools. Watching you “whip something” up, bringing it to life, then bringing it to us plebes 👍 way to go Karl
During the air hammer clamp welding, showing the pedal positioning as the weld is made was a very nice touch. Thanks for showing that small detail.
Karl is killin' it. Share with us the secret of your motivation!
LOVE! I love what i do and am motivated by all the support that comes from the community and knowing it could help people like my self struggling to learn.
There’s no secret to motivation. You just need vision and a decision.
This channel is pure inspiration! Way to go!
thank you!
I love what you all are doing and the help and information you provide to people getting into metal shaping! The resources "kids" have today is something i would have loved when i was young and hungry to learn. Your generation is so lucky to have access to such a wide range of tools that were either out of my reach or just not even invented when i was a teen!
BRILLIANT...BEAUTIFUL....AND STOKED !!!!!
Beautiful piece of equipment Karl, well done both of you!!
coolest tool i've seen in a while!
Fantastic stuff! Love how this went from an idea and into production, and you took us along through the whole process. Go Karl and Elio, keep moving forward!
I'm loving every bit of it. Keep on rockin.
Awesome video Karl and Elio, offering these tool is great and will help us outfit our shops.
Certainly amazing machine, looks like it works very well, thanks for sharing, all the best to you and your loved ones
Informative and easy to follow directions. Really nice kit for the cost considering the precut materials, parts, and capabilities of the tool.
These tool creation videos are amazing and inspiring. In our consumer based economy it’s all to easy to forget you may have things in your shop just waiting to be assembled 😂 Thank you so much!
Your talent amazes me. To be making and selling kits to make these tools !
Thank you Karl.
💯👍
Another great video. It’s awesome watching your channel evolve and grow and the content keeps getting better and better. Looking forward to your new forum on Patreon.
Absolutely love this tool. Goal for the year is expanding the shop so I can have room for more tooling.
You do so much for this hobby/ industry by passing on knowledge and stayed humble,I commend you on that sir
Versatile tool Karl that doesn’t take up a lot of space in the workshop
Good to see them going into production 😎
Very nice! Great tool. Happy haircut!
Yes, as a machinist..it is vital to chamfer prior to tapping.
I learn a lot from you and Bennett.
Something tells me Karl you got your first Errector Set by the age of two!😎
Lol I did have that stuff and it did inspire me at a young age 😂
Hi! Sir.
I received your store's T-shirts and stickers today. It’s very cool!
As a Japanese 🇯🇵 person, I love your wonderful car custom art.
Thank you!
It's Hammertime! Great build, good luck with your kit.
Very nice Work Karl and Elio
Wow I can easily see how this tool should be in everyone's workshop.
Excellent video! Thanks guys. I hope you and Jordan have a video planned!
This is awesome 😎 And Sir you deserve growth and much success.... Thanks for all you are doing.
Wow thanks so much!
Awesome work on that new tool karl and elio, I'm looking forward to its arrival, my minds been crazy on the possibilities and profiles you can create with it, keep up the good work
I WANT ONE!!!! You rock man.
I’m so looking forward to receiving mine!😁
Super cool piece of kit!
I just love your stuff!
Another awesome video. I can't wait to get my new shop toy. Thanks again Cheers from Alaska Karl!
That is a sick little setup! I could of used that yesterday on a Toyota 4Runner hatch!
Awesome video thanks
I build a similar thing inspired by your last video about this - I found putting in a spring to push down the upper dye (for steady contact) reduces the amount of "hammermarks" (induced by "hopping" dye).
Thanks for the inspiration!
Cool, thank you for the idea!
That is really neat and I am going to buy one. I just bought a new house with a nice shop but it’s gonna be two months before I can get in but I’ll be one of the newest to install add. Thank you very much Mark Reid.
Finally my welding has something in common with yours! The forgotten ground.😆I'm a total newb, but I always pick up new tips watching your vids. Appreciate what you do. Thanks so much for sharing your experience and expertise! Maybe your next project could be the wi-fi ground🤔
B-E-A-uuuuuutiful!
👊👊👊
Great idea
I have one and i Love it best regards from Germany
Would definitely be a buyer if DXF plans was available, its a great design and want to make one myself.
Top dás galáxia ótimo trabalho parabéns...mito dás ferramentas 😮😮🎉
amazing...God has truly gifed you...well done..great prezi
Now I'm even more excited to get mine! Come on Postman!!!!
Just waiting on the hammers. Everything is ready to go! Stoked to see what you make with it Larry!
Good work, all the best boyz
if the center plate was just a little inset that would help center because its a round part so it would kinda self center
That’s true and a great point. Elio mentioned that also. I wasn’t sure if the kerf of the plasma not always being perfectly 90 that it could be off a little but I do think you and elio have a great point and it’s worth changing
Great kit
Hi Carl could you make a short video on attachments for this power hammer? I see you can make beads and profiles. Can it shrink and stretch? And how large a panel could you form on it? Im looking for a DIY power hammer too.
Absolutely and that’s what’s next! I believe this hammer can do it all! Shrink, stretch, planish, bead, flange, profile. I’m very excited to make all the attachments ASAP
great job
Great tool! I'm thinking of making one. A small suggestion- when making the middle plate, reduce the dimension where the clamp is welded on. The groove in between plates will help the tubing be square to weld on. Keep the videos coming. What about the Baby Buick?
Great idea thank you! Yes, gotta do a video on the baby buick soon
that’s a great tool you’ve come up with! Hope for even more success for you.
Thanks! Dig your logo 👊
Excited to receive my kit.
Thanks for your order! You are going to love this thing plus all the additional stuff I’ll be making for it!
That’s a neat little tool. Good idea. Only slight limitation for beads is they have to be within 200mm of the edge of the panel. I don’t think beading is this tool’s best feature. Other tools do it better. But I can see so many uses for this in other ways. For example, I wonder if a tipping die could be designed for it? This would play to its strengths. Also linear stretch dies & hole punching, shearing, countersinking holes, riveting, could be possible? Literally tons of uses where air tool can be used with this type of clever alignment. I think if you could design and produce some good dies for this, for sale, then this tool has multiple uses for small fab shops and could be a winner. Great work.
Yes, I believe a lot of these are possible and I’ve even thought about making an attachment to except the very common kick shrinking dies. If this tool can do a variety of operations, I think it can be very useful, even though it’s limited by its size.
Takes me a while to decide if I'm going to subscribe, watched a few video's over last few years so decided to subscribe at last.
I like your presentation, really enthusiastic.
You seem like a really great guy on camera who want's everyone to be able to have tools to do the job but unlike several channels I've watched, realise not everyone has unlimited funds.
I'm retired motorcycle mechanic so will probably never make or use 99.9% of the information you give away, hope you inspire others as much as me though
FWIW, even though your channel is getting bigger with probably more money coming in, you don't seem to have changed.
Good luck to you.
I missed the first batch but ordered this one right away. I think I’m most excited to get the Power Fist. 🤣
that is so awesome. i'm gonna have to order one
Karl, i love your content and all that you do on here. please keep the fab work content flowing, don't turn your channel into just advertisements for your DIY tools. that's the way fireball tools channel is now, just an advertisement for the tools they make, no more fabrication videos other than to show how to use the products they sell. i've learned a ton from your channel and your projects are an inspiration keep it up!
Thank you for this feedback! I do really appreciate it and certainly don’t want to lose the roots of the channel. I do just really love making these tools and think they can really help a beginner metalshaper so that’s more of my motivation with this tool and the expanding lineup. I still have lots of work on cars to do and I am going to try and pump out two videos a week, so that one can be on the projects at least. I don’t want to see it become just a DIY tool channel either. My passion still lives in building cars.
@@MakeItKustom i love the DIY tools myself. i've just watched so many youtube channels turn into paid advertisemetns or "look at thes tools my sponsors gave me this time" shows. if i wanted to watch commercials i'd watch TV
Im making the stretcher one, i might attempt this one someday
very nice
Just joined your channel wanted to try out this " badge perk" Also great job on the video and baby power hammer. Have a great day!
Very cool!
Man i love your channel. I'm gonna move to Canada just to take an apprenticeship from you😂
💚🇬🇧🌱 guess I'll have to make my own version but looks pretty simple can't wait to make some curves, think I'll use ply as a fence though as I don't have a shrinking foot press thingy either, but I'm all a very handy tool 👌 Cheers for sharing guys x
Excellent.....
I ordered mine when the first video came out. Still don't have it but I'm sure it's coming soon. I'm going to look at building a fence that would attach to the middle bolts on the frame. I'll slot the holes so the fence can slide. I'll let you know if it works or not. Can't wait to get mine...it's like waiting for Santa!
Отлично , мастер!!!
just a thought, if you put a tab in the middle plate that protrudes out the bottom you would have a good place to clamp it in a vice. love your design and your thoughts process to create tools that most can afford. keep it up great content
Here is a tip go and buy several cheap cordless drill motors to keep your chamfering bits in that way you don't have to change them using the chuck instead you just grab another drill motor like a California reload with firearms you just pick up another firearm that is already loaded instead of bothering with reloading the one you just emptied same thing with angle grinders buy several and have different discs and grinding wheels that you use most often at hand ready to go
Thanks for beautiful knoledge. You are rocket , best regards from Poland where good crazy People live też
Formidável!
Great stuff Karl - keep it coming! Btw you’ve probably heard of the TIG Button - I have one and it is so nice not to have to mess with the pedal
So after seeing the first video i made one for myself just off the last video
it was a spur of the moment thing so I didn't have a long throw air hammer nor did I have enough bolts so I made mine a weld together
The biggest thing I learnt was the position of the air hammer
Having the right hammer not the standard short throw ones
And the die surface finish
I also have version 2 that I am working on with a few changes that will make it a more versatile tool for my shop
it's a very clever way to create a profile without the footprint or cost of a larger machine and it's very capable
Awesome!! I’m stoked you made one! Yea those are all pretty key to this build.
@@MakeItKustom Cheers I am glad you appreciate I made my own I wasn't sure
I would normally want to buy something like this to support the creator but being Australian the freight alone would be more than the kit plus the 3 month freight
Once I get my long stroke hammer and air foot peddle I'll dial this one in I have the idea of using 5082 alloy for the dies for alloy work that way I have less chance of marking it compared to steel
Sup Carl
hey man!
I’m with Elio on the power tapping. But admit I know that is how all manufacturers do things and they do make a power Tapping tool. I just make myself do it
Incredibly nice machine you made, can you make tight grooves? Willing to make fenders for a 1915 T Ford. Thanks for the informative videos.
Do you do in person classes? If not you should consider it, you have a great way of explaining things. I would definitely pay to have an in person class with you on anything metal work!
Nice
That’s a machine tap for power mills etc. hand taps typically are the “thin” type of tap you referenced. Square ended
MIi è bastato il primo fotogramma per capire che ti meriti un "mi piace"
Sign me up dude! Want one bad!
I love the channel. My suggestion would be to send the kit with the hammer holder welded I would not feel comfortable doing that part with no tig welding experience.
Cool tool ! So where do I get one of those Elio shop assistants? Lol it’s alway awesome to see you achieve a design and fab! Thanks Karl for taking us all on the journey!
Marvelous. I want one! Have you considered developing a kit to convert a palm nailer to a hand planisher? So it ends up like a $700 Ox? I saw someone using a diy one of these based on a $50 nailer, and it worked so well it was like he was ironing a shirt!
Nice work. Should sell the plan as a dxf, I'd pay for it
There are combo drill bit / taps made just for power tapping.
Should throw in a street T, and a plug. For oiling the air hammer. Thats all i got.
Will be a nice addition to any shop!
I wish I had some extra money, I'd buy every tool you offer.
You have the same throatless shear that i have,,,,,,,,,,,,(you may cal it a beverly shear),one cool tool👍
Hot damn look at that kit 😍 ❤🔥
HECK YA TED!