Fiberglass repair for rust holes with No welding
HTML-код
- Опубликовано: 29 сен 2024
- In this video I do a fiberglass repair for a rust hole with No welding necessary on a Toyota Corolla using simple materials and tools that will get the patch job done quick and easy.
USC Duraglass bodyfiller: amzn.to/3vvWjqZ
That wax paper trick is next level!! Appreciate you!!
You’re welcome and I’m glad it was helpful to you 💯💪🏾
The King is back on the tube! Glad to see you! Love that fiberglass putty😁 40 years ago, the shop I worked at made us braze metal patches over the holes, and then cover it with Duraglass. I was glad to skip the brazing part later on. Good vid!
Thanks Bondo Billy, I gotta check out the rest of your videos, you do great work 💪🏾
@@undergroundbuilds7 thanks! This RUclips stuff is a pain sometimes. The sound just quit on my 4K hat cam, and my iPhone is acting up, too. I recorded my first welding demo, and there’s no sound☹️
@@OldBondoBilly yeah it can be rough attempting to do RUclips videos, I still have issues to this day
@@undergroundbuilds7 I’m jacking around wit my iPhone and iPad right now, cuz they’re both screwing up🙄
@@OldBondoBilly I use a iPhone and iPad as well and have issues with them all the time, I always have a storage issue 🤦🏽♂️
I like that wax paper trick. You just showed a old dog a new trick. Much appreciated King 👑
It’s definitely a old school trick I learned some years ago and can be used multiple ways Sprayway…I appreciate you checking out the video!
Yo he came thru on this tactic! Brilliant 👏 👏
For sure. I would have never thought of that.
You learn something new every day 👍
@SprayWayCustoms try banana , drys hard and sandable
Good to see you back, Boss. Hope you and yours had a good holiday and you're ready to hit it. Sometimes cheap and dirty is the way to go. Take care.
Thanks Joe I appreciate you and I hope you and yours had a great holiday also! I’m definitely ready to hit it💯
Underrated !!
Thanks King, I appreciate you checking out the video!
happy holidays UPK, thats def a tote the note/ sell the car repair,thanks for the video
Thanks and Happy Holidays to you and yours also!
Looks good bro thanks for sharing!
You’re welcome Miguel, I appreciate you checking out the video!
First time I've seen the wax paper method. I usually use that stick on mesh for a quick no weld patch. Never even thought of using wax paper🤔
I put 2 inch masking tape on cardboard, mix the duraglass right on top of the tape, spread it out over the sheet, and slap it on. The tape pops right off the Dglass, and it’s already fairly well shaped.
I had a body man show me this years ago that was making good money fixing cars on car lots, it’s a few different ways of doing it and I like learning how others such as yourself do things
That’s a good idea right there, I have to try that
@@undergroundbuilds7 thanks King. I think you’ll like it
I'm thinking if I took my car to a bump shop and they did this fix hell I wouldn't know if it looked damn good too me.. Man I'm going this myself and save my thoughts and me lots of damn money..
You can do it and if you don’t like what you did you can always go to a shop but you got this 💯💪🏾
What about it rusting out from the inside?
The inside was prepped as well so I recommend prepping both sides if possible
@undergroundbuilds7 how?
@@JdsjsKdmem I grinded a sanded the inside of the quarter panel
@@undergroundbuilds7 how?
@@JdsjsKdmem with the same tool that I used for the outside
nice. i just bought some rust with a van attached to it, gonna use this trick all over that thing.
😂 glad the video was helpful!
Mate that comment is funny as fuck 😅😅
Me too!
I was gonna put fiberglass putty in the rust hole on this ‘72 Buick Electra, but Bear Budget Garage was wanting to see my flux core technique, and I’m reviewing the $101 welder I got, so I put a patch in before fiberglass putty. ruclips.net/video/ngYmUczsRMY/видео.html
Im going to check it out
The wax paper is something I've never seen done before, that's pretty slick. 👍
I appreciate you checking it out Steve, it works good and it’s a quick and easy alternative to welding 🤘🏾
@@undergroundbuilds7 hi, i didnt see how you treated inside of the rust metal? I usually try to brush with steel brush as much as I can, then i spray it with a lot of antirust, and spray with paint from inside. After its done, I use your method of sealer. Altough I use metal mesh for holes.
@@uroskostic8570 I pretty much do the same process as you and use a rust converter, then let that dry 24 hrs then apply paint or under coating depending on what I’m doing
Thank you for introducing me to duraglass.. good stuff and the wax paper trick. Did my vehicle and now I'm working on all my friends vehicles helping them.. this video helped me get into body work. And helped alot of others. Also going to be using usc all metal .don't know if you think that product is better im going to try both products but thanks again great video..👑🤙
Glad the video was helpful and it’s awesome to hear that you got into body work and have been able to help others 💯 I don’t use the all metal filler but it’s not a bad product! Good luck to you 💪🏾
That is definitely called a good "bang for your buck" repair.
Thanks Denise, I appreciate you checking out the video 🙏🏽💯
So glad I saw this video this morning after watching so many videos on rust repair now after seeing this video ( using wax paper brilliant by the way) I feel more comfortable for someone doing this for the first time now so much appreciated!!! I'm going to try this on my one wheel well on my truck today !!!
You’re very welcome, I’m glad the video was helpful and I appreciate you checking it out 🙏🏽💯
For what I need to do - It’s the right way to do it for me. Great video.
I’m glad the video was helpful 💯
Lololol. You did a great job King and you don’t have a single troll. I did the same thing and I get about 50 trolls a day😂😂😂😂😂
😂😂😂 the people love you Billy!
@@undergroundbuilds7 lol I’m glad the trolls don’t outnumber the love😁😁
@@OldBondoBilly that’s always a good thing plus I wouldn’t let them bother me anyway lol
@@undergroundbuilds7 Muh trolls don’t luv me but Uh luvs them🤣🤣
@@OldBondoBilly 😂😂😂
great video UPK. quick question is there a benefit to actually cutting the rusted metal back to solid metal before doing your fix? i want to spruce up the wheel wells of my '06 odyssey.
It would be good to cut out as much rust as possible before doing the repair if that’s how you want to do it
Nice, but what were doing at 7:15? I never saw you apply any fibreglass to the inside?
It’s the same process, just on the other side of the rust hole
Thanks for posting this, bought an old 4x4 with some rust spots and was looking for an easy solution.
I appreciate you checking out the video and I’m glad it was helpful!
Great content. Not everybody wants welded patch panels. You gotta bend a little and give them a solution. May not last forever, but is presentable for the near future. Its only temporary until it lasts. Love the videos. I may have to ask your expertise on a fiberglass fill and paint blend over some headlight pockets. I wish you were was local to Dallas.
I agree with you, sometimes you just need a quick fix to get you back on the road and won’t cost you a lot of money and this is just a alternative that people can take. Email me what you’re working on if you want and maybe we can get it figured out!
Really love the video. Saw a similar video where the same method was used. May I ask you though do you think using some fiber glass sheeting would it help strengthen the area in addition to the bongo mesh they sell?
The fiberglass sheeting would be a great idea and I planned on showing that in a future video! I appreciate you checking out the video 💯
This video was a lifesaver for me late Friday night. I welded what I could in the arches and the upper part was impossible for me due to angles etc couldn't even get a grinder in. After failing with fibreglass for the first time, trying to press it in Nd having it just fall in my face in lumps I was getting frustrated. Did the patch method with a plastic bag, and it worked spot on. Thanks fir sharing this, literally life saving. And I'll definitely use this over welding in the future for some things. Cheers, from south wales UK
Glad to hear the video was helpful to you and that you were able to get the job done 💯💪🏾 I appreciate you checking out the video ❗️
Rust free😂😂
Youleft al the rust untreated inside.
Looks good now but over 1 year and the rust will show up again.
Quick patch but Al the work for nothing.
😂 I appreciate you checking out the video and giving us your wisdom 🤣🤣🤣
Don’t get me wrong, it was not meant negatively. I commented before I saw the whole vid. Yes your right, for a quick fix it will do, but it’s such a pity for the work.
Some rust converter and wax spray would extend the repair so you enjoy a longer period of the work you have done. I know cost would be a little higher but then you wouldn’t have to do the same job again on a short base
I’m just doing the same shitty job on my car
😂
But love the waxpaper trick.
I would place some glasfiber at the backside and then the waxpaper trick at the outside
That will last for years. Good enough for me and fast.
Glad the video was helpful Tim 💯
I like that kings and queens of God Almighty
Appreciate you Mark🙏🏽💯
I love your idea. So easy work around and not to much sanding work. Thank you for this video. I am more confident to apply it on my car.
I’m glad the video was helpful and I appreciate you checking it out!
I do that type repair myself. I'm not about to do $3K worth of bodywork on a 5K pickup. But I don't want to look like junkyard Joe when I go to a customers house.
I feel you on that 💪🏾 you don’t have to spend a ton of time and money to look presentable 💯
@@undergroundbuilds7 I like to mask off the lower half and paint the bottom matt black. Then I slap on a rubber molding and it hides the paint line. It looks good and clean.
@@rutniktrainer you can definitely use those moldings to your advantage!
Just as a side question, What is the material you use to make those covers for the wheels to protect them from overspray?? I see alot of shops use them but I can never tell if it's old blankets or a different kind of cloth.
You can buy production style wheel covers but I use Fleece from the fabric store
Great job will this work on any size hole?
Thank you, and it should work for any size hole
Well done. Wax paper trick was brilliant, solves the shaping problem straight away, and will come off, unlike aluminum foil. The fiberglass should hold together better than Bondo, which is too heavy, and will fall out of a big hole or bottom repair in one big chunk. Better for minimizing future rust than spray foam, by a long shot.
You’re right on the money 💯 I appreciate you checking out the video and glad it’s helpful!
Working on tractor mudguards tomorrow. Thanks for your help from Australia.
Glad the video was helpful David, I appreciate you checking it out in Australia 🙏🏽💯
Бля, чуваки, у вас там разве нет монтажной пены?
Я уверен, что мы делаем
Love the wax paper truck. Nice to see you posting again !!
Thanks Pstreet I appreciate you checking out the video and I’ll keep the videos coming!
Does this work on the bottom skin of door rot?
Yes it does!
I love this! Will be doing this on my old beater.
Glad the video was helpful Emily 💯
Make sure to treat the rust next time
Thanks for the tip
If you use foam u use less filler
Appreciate you checking out the video and leaving the tip💯
Great job explaining for us beginners!
@@Jim-b4t glad that it was helpful Jim❗️and I appreciate you checking out the video 💯
Nice work! Yep don't let perfect get in the way of better.
Thanks Robert, I appreciate you checking out the video and I hope it was helpful!
That's a great saying, I'm going to remember that one :)
Great job Bro save me a lot of worry on how to patch rust hole on my rear floor pans. Of my Classic 84 TWN Car ❤❤😉
Glad the video helped Vincent and I appreciate you checking it out 💯💪🏾
Great video upk on showing how to fix things when your on a budget . The trick with the wax paper was interesting. Happy new year my friend
Thanks James I really appreciate you always supporting me 💯 Happy New Year my friend!
Also spray way sometimes uses spray foam on certain things. Hell ya. Looks good, keeps money in the pockets!!!
Yeah spray foam works good in certain situations also!
Yeah i like the spray foam way slightly better because it fills the hole completely and you can easily shave it down before you put fiberglass mesh on top of it.
Hi UPK! I'm over here now and going to start watching these videos as time permits. Thank you for the link!
Thanks for subscribing Danno, I really appreciate you!!!
I love this business you learn something new everyone you do s repair your kinda stuck on....sometimes all we have to do is have open mind and listen , dude this beats trying to spread it to fill s hole , and it's a pain in the nuts , thank you kind sir I will be using this trick on this 57 Cadillac I'm just filling and making it sellable cheap n fast !!!!
I’m glad the video was helpful to you 🙏🏽💯
This is great! So many get hung up on things looking perfect of on making a fix that ends up outliving a used car that probably only has under 5-10 years left anyhow. This is a GREAT way to get it done in a hurry, and get back to work so I can buy something that will last well into the future! :)
I agree that everything doesn’t have to be perfect and you want something that looks decent and gets you back and forth like you want until you get that vehicle that you deem your perfect vehicle!
Thank you my friend for sharing that great idea. I have a similar repair to do and will give it a try . A great cheap and quick way of fixing a hole without the cost of welding . Regards from the UK .
I’m glad the video was helpful and I appreciate you checking it out from the UK🙏🏽💯
Bro!!! Thank you. This is right on time. I see the link. What type of angle grinder, sander and compressor do you recommend? I am working on my project car and I want to avoid the bad products if possible. Thanks! I have a 1963 Lincoln Continental.
You’re welcome David, I’m glad the video was helpful!
Heyll Yazz. Thanks for the tips man. I'm working on a square body daily driver. Not a show truck, but I do care about it. Thanks for all your time, an tips. I'm a mechanic not a body man. I need all the help I can get.
Glad the video was helpful Brandon and I appreciate you checking it out!
Appreciate you sharing your knowledge with us 🙏
You’re welcome Mia, I hope the video was helpful!
New subscriber here, I really like the way you fix things, I watched a few of your video's, nice learning new tricks every day, thank you.
Thanks Carl, I appreciate you subscribing to the channel and I’m glad the videos are helpful!
Thanks very much. Brilliant technique that wax paper bit.
You’re welcome Paulette, I appreciate you checking out the video and I’m glad it was helpful!
Lol everybody always saying crap on videos like this "that wont last you need to weld it" they clearly never have been on a super tight budget.
This is definitely budget friendly John, appreciate you checking out the video!
Brilliant idea - attack the hole. I need to go back and locate some rusty cars now.
Just a simple fix that will make that rusty but trusty vehicle looking presentable again. I appreciate you checking out the video!
@@undergroundbuilds7 much respect brother!
how did you get the sheet of wax paper onto the inside ? you were standing up. Have you got long arms ? or a car with no innards ?
I leaned over the inside of the trunk
I'm doing fiberglass and metal repair right now love the idea of the wax paper thank you for the new track
You’re welcome Rex, I’m glad the video was helpful to you!
Damn thats slick brother! Appreciate you spreading that knowledge
You’re welcome and I’m glad the video was helpful!
never fix rust with fiberglass or bondo weld in patch and then you will have something
Thanks for watching the video!
Bro Thanks for the wax paper tip.. just what I needed to finish my project..
I’m glad the video was helpful Clifton and I appreciate you checking out the video 💯💪🏾
I like your effort to repair the rust on your vehicle. It might help your repair look a lot more professional if you looked at some of the auto body repair videos on youtube and then do your repair. I looked at auto body repair videos on youtube for 2 or 3 months before I fixed my rocker panel rust on my truck. I wanted it to look like it was done by a real auto body repair shop and when I finished, it looks really good. The wax paper concept is a great idea. I like anything that I do to look perfect. Thanks for your video, it gave me a few more repair ideas that I had not thought of.
Good job!
Thanks I appreciate you checking out the video!
Awesome video buddy ! Thank you !
You’re welcome Doobyboy, I appreciate you checking it out 💯
Would this work on a fiberglass hood or you recommend get the fiberglass sheets added on with the filler?
I don’t see why this couldn’t work, I probably would do under the hood first and then the top
Great wax paper idea! I love it. Also the king n queens! !!
Thanks Joel, I appreciate you checking out the video and I hope it was helpful!
Great video, thanks. I'm fixing up my '98 chevy truck.
You’re welcome and I’m glad the video was helpful!
wow what a great little video thanks for posting king.
Glad the video was helpful Wayne!
@@undergroundbuilds7 the best i seen my friend cheers
@@waynegallant9056 appreciate you Wayne 🙏🏽💯
will work but will come out again real soon!! wont last good for a flipper
Appreciate you checking out the video!
C'est du papier cuisson ?
Oui, c'est
@@undergroundbuilds7 👍👍👍
thanks this video helps me out
You’re welcome Rick, I appreciate you checking it out!
Good one
Thanks, I appreciate you checking out the video!
@@undergroundbuilds7 no problem
Nice budget fix! Happy New Year!!
Easy budget fix Garage Hack…Happy New Year!
This was clutch for me thank you
You’re welcome Darius, I’m glad the video helped!
Right on time 😂😂😂 keep it coming it will be on my on toy so I'm cool wit the flaw 😂 appreciate the tips geee 💪
Glad the video was helpful Dieselapegarage, I’ll have more videos coming soon 💯
@@undergroundbuilds7 bet for sure I'm tuned in
@@dieselapegarage I appreciate you 💯💪🏾
Good to see you back! Was hoping you were just busy at the shop. Happy New Year.
Definitely busy at the shop Jay, Happy New Year!
impressive...so many of us are trying to get our vehicles to last longer and look good too....great idea...
Thanks Julie, I appreciate you checking out the video and I hope it was helpful 💯
Love it parts shop had corner piece only problem how to attach when it's rusted out
You’re planning to use this method to attach the corner piece?
Yes I am
It's basically a quick fix just to make it look a little better.
Yeah it’s a quick fix that anyone can do
Damn ,thats slick. You can somewhat shape it to. Nice !!!
Yeah you can shape it pretty good into the shape that you need!
Thanks bro that's genius 😮😊
You’re welcome CarFlix, I’m glad the video was helpful💯💪🏾
Thanks bro great job. More so Thanks for sharing this with us.
You’re welcome and I’m glad the video was helpful!
That's some good Afro- engineering work there.
Thanks I appreciate you checking it out!
Thanks Good Job.All way's learning
You’re welcome Mike, I’m glad the video was helpful!
Good job you're telling the truth. I believe you.
Thanks Mark, I appreciate you checking out the video 💯
Will it still work if you can't reach the inside?
Yes it will Johnny, if the outside is prepped correctly for the fiberglass to adhere and bond it’ll work
The master did it again👍👍👍😎👑
Thanks Brian I appreciate you checking out the video and I hope it helps!
You skipped the most important step!
What did I skip 🤔
Really good advice. Thank you 👍👍
You’re welcome Darren, I’m glad the video was helpful 💯
Good work bro
Appreciate you checking out the video Make Peace!
DURAGLAS IS A GOOD WATERPROOF CHOICE
I agree Alicia, and I appreciate you checking out the video!
Great tips, thanks for the vid!!
You’re welcome Andrew, I appreciate you checking out the video!
The wax paper move was great. thanks
You’re welcome Michael, glad the video was helpful 💯
another freat vid exatly what i needed to see
Glad the video was helpful Kevin!
U da best brutha😊. JR
Thanks Star lite, I appreciate you checking out the video and I hope it was helpful!
Hey, how long hold it?
If mixed correctly the fiberglass will start to harden so you should only have to hold it for a few minutes
Tanks man!!!!👏🏻👏🏻👏🏻👏🏻👏🏻
You’re welcome Mercel, I appreciate you checking out the video 💯
what was the blue paste you used?
Maybe you missed it in the video but I showed what I used in the video and mixed it, basically the whole process on how to do it and there is a link to the product that I used. I appreciate you watching the video!
Jesus loves y'all
Thank you!
Great idea thank you
You’re welcome JH, I’m glad the video was helpful and I appreciate you checking it out 💯
Nice 👍 🇬🇧
Thanks Paul, I appreciate you checking out the video 🙏🏽💯
good stuff bro
Thanks DeeJay, I appreciate you checking out the video and I’m glad it was helpful 💯💪🏾