The moment of truth… is the engine rebuilt? 🫣 (Bad Chad bonus episode)
HTML-код
- Опубликовано: 21 май 2024
- When we bought the engine, we were told that it was rebuilt, but you never really know… so we’re gonna pull the valve covers off and the oil pan off to have a look at what’s inside.
#badchad #engine #rebuiltengine 
Авто/Мото
![MURDER DRONES Series Finale [TRAILER]](http://i.ytimg.com/vi/p6mhC5Iatns/mqdefault.jpg)
I can’t understand why Jolene is not more in the videos, needless to say , she is far better to look at than the rusty heaps ! My vote is for more JOLENE!!! Add votes now !!
No offense to your engine builders Chad. But I don't think I would be removing Main and Rod caps outside in the open with dust blowing around. Not a very clean atmosphere.
@@user-er6wb9rf8u That might be the motors in your shed.
these 15 minute videos are great. I can watch one without feeling like I'm about to lose an hour.
Thank you for the bonus video. Appreciate it as I haven't missed even one of you videos since I signed up to your channel. 😊👍💛 🚗
You guys are amazing and keep doing what your doing bud thanks for the laughs and for the really real tv and I'd support you any day bro
If you’re gonna go to that time with plasty gauge check every rod in main bearing engine had old freeze plugs in it and you need to pull the heads and look at the valves and check the seats
Thanks for sharing with us today.
Keep watching Jolene you will learn all this in no time, the very smart person you are...👍
great job managing the wind noise !!
Finger's crossed🤞all's ok 👍 Go for it Team Hiltz 👁🐅👌
Cool, bonus! 😊
I see the Corvette out, time for a videoing going for a nice drive in it.
Thanks for the extra video
Awesome, Thanks
Excellent Camera work ! 👍
looks like a good engine!
Looks like a runner 👍🏼 chuck it in something & use it 🤙🏼
Can't wait Bad Chad and the lovely Jolene
Chad should use that car hoist to lift his new break off the trailer. And maybe install casters under the the legs of the new break so it can be easily stored out of the way when not in use.
🫵🏻😎👍🏻
Hi to all . I always read the comments on your channel and I can't believe some of the stuff some of these people say. Ignore their crap and keep on keeping on. A forklift on your yard would'nt work to well. You'd get stuck a lot . Putting wheel's on that brake tho would be a good idea . Lov your channel and you guys !
Chad without his hat looks like a true professional
Hope the engine is good
There he is the Rooster 👉🐓 Woooooo 😁✌
Looks like you got a nice set of GT heads only they haven't been drilled out for the cross bolt pattern The Boss by the exhaust where the hump is is normally where they drill the hole for GT pattern😊
good show , I really liked how guy just throws the peace of plastigage on the ground that he didn't know how to use , like its his own yard ,so much disrespect .Good job buddy !!
Maybe some on slapped some Rod and Main bearings in, not sure mutch else is new.
Thanks
Rockinwiththerooster😂😂😂😂😂😂🎉🎉🎉🎉😂😂😂❤❤❤❤❤
Alice in Chains...ROOSTER !! ...that song came to mind when i first saw Rooster 🐓
I've got a torque wrench like the first one Chad brought out. Had it for about 45 years.
Nice 👍
Chad's not a mechanic and that's ok. You don't have to be great at everything. I find it interesting that you have so many master mechanics watching a body man show. Would love to see you in more of your videos, though you do a great job on the camera.
@@user-er6wb9rf8uGet back to the model car you never finished as a kid. Worthless troll
Was it seniors day at the shop. Lol they keep running into each other I'm surprised Chad wasn't mad Chad he seems to have more patients
Man, how many times I’ve thought.. Chad could really use a good decent size tractor with a boom lift.
he has one...but he tips it over...over and over
Motors looking good chad ive seen alot worse everything will work just needs to be cleaned and checked with micrometer to specs it wont be long now the beast will come alive !!!
The mount on the engine stand is upside down, take it off and turn it around!!!
why , its holding
@@user-wf6es1gx8j It's Canada lol
So demanding! Get off your ass and do your projects!
@@hoochgiese4735 you got problems
@@hoochgiese4735 you got a problem?
I would reset torque on all rods and main caps so you know they are equal.
Happy Wednesday yall
Joleen, with your achedemic skill level, one hour with a repair manual and you will be the authority in this shop.
And that is no joke as Jolene is a very intelligent individual except it seems to be there is one category she seems to be lacking good judgment in.
What do you mean will be? lol
Yeah...the same lack of judgement your mother had in deciding to keep you....@@rogertoppenberg4276
@@rogertoppenberg4276 Do tell as you claim to know so much about other folks!!!!!
@@user-er6wb9rf8u you are a nat on Chads balls.
Replace the 5 lb pushrods with light weight replacements guaranteed to improve high engine speeds
@@user-er6wb9rf8uHow pathetic that you can't get a law. Mower to run and sit here trolling like you built anything in your life.
Is it new camshaft . Has the cam been run in ,I would not take the chance that it has been broke in I would get it started on a stand as fast as you can so the break in lube is not washed of the cam ,and run it at cam break in speed for the amount of time needed. It would be a shame to wipe the cam out .make sure you use a lead replacement in the oil right of the hop É.
Send it!
WoW !👂 some people are harsh 😕
Beaucoup de monde sur ce moteur !! En plus dehors et sans établis , je me pose des questions ?? Hello Yolene ...
was that the $25 engine from the auction 😁
Good enough 👍
The motor is ok and if guy buying it primes the oil pump buy puting drill on pump shaft tell oil pressure and turn crank buy hand and replete many times and start
Jolene bonus episode💪🥰
Check to make. Sure
Keyboard warriors are in full voice now
That’s called peace of mind. Never take third hand words when it comes to engines. Plasti-gauge is cheap. Been there done that. Cheaper to fix on a stand then it is in the engine bay
Nate obviously knows how to use a torque wrench.
Send in Daddy Sails. He'll straighten all this out. Riveting content. Whose Corvette?
That is the Queen Jolene’s Corvette. She doesn’t mess around.😊
Paint that mutha pank!
Send that puppy to Jims Automotive and they will sort it out for you. Cheers
Never seen bearing journal measured with a peice of paper before. Must have done my trade wrong I use a micrometer.
Too bad their not perfect like you! What's your channel named? I would like to watch you do your trade!
A good bunch of blokes
They are a riot for sure.
Too bad there is no transmission for the motor , may be tricky to find
So what the back story with
Rooster I miss it
Good thing Nate’s there 👍
what happened to the blower motor. i must have missed that episode.
@@user-er6wb9rf8u thats bad
no this is an FE block...garbage...the other is a big block 460
this motor has a 4bbl intake on it ? not a blower intake
JOLLY GONNA CHEW ON NATES LOLLY
😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅😅
Look at thrust bearing
💥💥🛠️🌺
If I was Nathan, I wouldn't hangout with this bunch of "Shade-treers"!
Der Der der
Should check sll rods an mains one will never tell the story just saying is it a 390 or 360 check the stroke
352?
Problem with rebuilds is you don't know who was the mechanic that f'd this mess. Best to disassemble and reassemble, replace damaged pieces. Or fire it up , open it up and see if you can figure it out as it's loosing it's sit
👍
come on , 2 bolt mains. belongs in a family station wagon
@@user-er6wb9rf8u hope chad did not pay a lot for it
I have ran 2 bolt maines with a blower and a trans break launching every other week end. Something this motor will never see. And I had no problems. @@user-er6wb9rf8u
Old 390 's use 352 engine blocks
What does a new 390 use
Red is for racecar engines...
Nate is a RUclips mechanic
Yo Chad. I heard Hockey Tape and seam sealer makes the best oil pan gasket ever. Even better than factory engineered gaskets.
@DumbCarGuy
Hell yeah brother.
A tiskit a taskit, a hockey stick
gasket.
Jolene = cameraperson,sound,director,production and running business side of things, a very hard working young lady, well done.
Whoever rebuilt this one didn't really clean anything up before putting it back together.
It was rebuild 5 year's ago.
when the engine was turned upside down something fell on the ground
I saw that too, sorta thought it could be oil but it moved pretty quick.
Yes saw that also
It's called Plastic gauge,I never seen anyone open up Plastic Gauge like that must be very old.
I want a ride in the vette
I want to drive it
The crank is not wore on the top ?????????
Too many boys for that . The oil pressur sil is not clean rebuild ???
Why not just use a camera saves a lot of mucking around.
Mucking around creates "content", which translates to RUclips paychecks for the creators (Chad & Jolene)
Lol
All FE engines have 352 cast number on front of block, and if it’s rebuilt show me the paperwork and name and number of place that rebuilt it
Why no audio watch a point
the only guy that know how to do it is nathan, the others, a bunch of useless guys
That oil pan gasket didn't look very fresh.
And a 352? That's ancient! All you have to do is smell the oil. An engine that has been run will have a definite odor. I don't know why these u-tubers insist on using an old worn out engine! Send it to a reputable machine shop get it rebuilt. All the work you put in that car and put a worn out engine and transmission in it.
People always say they don't have time to do it but they always have time to do it over.!
oh c'mon. a beam torque wrench ? precision !
What?Nothing wrong with that.
Built many many motors with one, so what's your point
Beam torque wrenches they say are more consistent and more accurate than most new racket torque wrenches..
So what car is thus for?
@@user-er6wb9rf8u Well someone is paying attention to what is going on after all.
@@user-er6wb9rf8u is this the blown engine he got from Nathan?
Your right the car won't see 5 miles. The only one that has is Jolenes race car and hauler.
Wrong intake for it to be that motor
I guess if nothing else , he can be used as a Gopher, like if you need a tool , you send the rookie , the Gopher! Hmmm 🤔 ya Gopher Chatterbox, sure fits him !!
One thing I NEVER DO is chime I. On something I know nothing about, ‘ol chatterbox just rambles on about nothing! Somebody please tell ‘ol chatterbox the correct name is VALVE COVERS ! Not valve pans!!
Your chattering now a hole.
Technically rocker covers
You have no idea how many others have tried to get that in his thick head but it seems as if no one is ever home !
So he calls them something different, so what? You say ToMAYto I say toMAHto! You're just been pedantic!
Hard to watch these guys fumble around and drop the tools in the dirt and then use them after. Can’t see what the torque setting is. Doing this all outdoors in the dirt !!
Don't you just love the sanitary working conditions?. If it ain't foobard it is now. None of them know the specs
It’s pretty amazing that none of them know anything at all about what they are doing.
I’m glad they are not doctors hahah.
They sure have fun though
Come on guys with such rude negative comments directed at Chad. Like all of us we have our own way and for some reason you’re watching even though you leave rude comments. Guess what like Liberace use to say he laughs all the way to the bank. I think Jolene actually had just returned from their bank in her awesome new Corvette.
Poor ‘ol Chatterbox is 100% out of his league with this type of mechanical work! Keep ‘ol RAG BAG away from the clean motor, as much grime as he carries on hisself that clean motor will be junk!!
Anyone who would buy something Chad is selling deserves what they get
their little plasti gauge attempt is comical...to get a proper reading all parts must be clean of oil....both bearings......plasti gauge is pointless on old junk motors...won't tell you the journals are egg shape ...plus using extensions on a torque wrench requires math to allow for them...4 guys working on one engine and not one has a clue
@bugeyev8
My thoughts exactly. You must be new here? Most guys stop trying to help when they figure out what they are working with.
Very entertaining, yes comical.
Always an A+ effort by Chad
This ole guy doesn't know beans how to use a torque wrench!!!!
Chad cannot build a or and he can’t Tig weld
WHY WAS MY LAST COMMENT DELETED .I was just describing the proper way to use plastigage .what's the point of you asking for comments when you turn around and delete them
Junk motors
Jolene you should run down through the comments and block all the know it alls, they would never be on my channel.
They don't have a life if they are spewing on some..sad little people
Good or Bad, ALL the comments bring them Revenue.. blocking people would simply cost THEM money...