this is car is literally a video game car now. a beautifully crafted machine and im hoping it could possibly get in the next forza horizon game. truly a masterpiece in mechanics and engineering
the thing that terrifies me is the transmission right next to him. if the gearbox explodes or a massive clutch fail, that could hurt really bad. if not worse.
" No son, it's like the Mazda787B that kept winning the Lemans 24 hour, and they had to ban it because no won else could beat it " They banned it under the "loop hole" that it was not a reciprocating engine !
That thing sounds incredible. I’m really impressed with your understanding of the engine and how it requires different fuel percentages, for different rotors, in order to make them run together properly. It was interesting to listen to. Solid video, Rob. Congratulations on building an inspiring vehicle.
what clutch do they use on ken blocks monsters i wonder? does he have to replace them after every thrash.. rob needs a better clutch. i want to see the real power go to those wheels. freaking monster. i love this car.
The progression of Papa Dahm has been my favorite thing to watch the last couple of years. It truly gives me confidence in myself and completing my goals.
Right on been watching you work on this nightmare off and on since the rotor issue glad to see it this far can not wait to see video of it on the street and maybe some day in person.rock on Rob 👍
Rob; "you heard it start up in the last video" Us; "do you even check your videos lol?!?!" last vid ended randomly right in the middle of wiring install.....
3:40 i used to live down the street from lucky 7 and trust me we can definitely hear the 3+ rotor cars really good! I enjoyed it very much but most people didn't care haha
That thing is unbelievable. Ive watched this entire build, and it still impresses the FUCK out of me. When he did that little clutch dump and bounced limiter for a second, wow. Theres not another car that makes a sound quite like that. Respect Rob. Seriously man.
@Rob Dahm You can probably learn a LOT about alternators and electrical from the EXTREME Car Audio community there's a good possibility that you could benefit from a larger diameter alt pulley or just better wiring and grounds on your charging system...? Like, maybe a 0ga "big-3" or something? And a simple heatshield between the motor and alt could be VERY helpful too..?
Big 3 & a nice lithium battery would be great for his setup, his alt wont have to do as much work & voltage would stay steady over 13V. Man spent 300k on the car, pretty sure he'd be fine paying 1k for a battery & thick wiring that wont let him down.
Extreme car audio is what those cars have who can flex chasis with their sub sound. Definitely I good way to lear more bout pulleys and energy in general as they demand enormous amount of power to work properly and not burn amplifiers or coils. Keep in mind some of those demo vans drop from 5k rpm to 800-600 or even engine stalls when they hit low hz tones, bcs of the energy they consume
@@Ayane13b Audio guys with big speakers go boom boom, so boom boom they can melt a power station. He is suggesting to use wires thicc as a dik and some alternator optimizations including some safety additions to avoid the bad burn burn. This car goes boom boom in a different way, but the power requirements are similar.
Iirc Rob's already using a pretty chunky alternator for this build?... I wanna say maybe a 300amp? And possibly made by Mechman or one of those types of companies, so the power should be there but one of the ways those companies build that much power from their alts is by using a smaller pulley, which is great at idle, but not so good for high rpms. I had a similar issue with a Singer alt on a turboed F22 engine that was having major issues at high rpms and we couldn't figure out what was happening but the minute I switched back to the stock alt the problems cleared up. Turns out it was the diameter of the pulley causing the alt to over-rev and create a considerable amount of EMI!?
These past 3 vids of watching you after appearantly after RUclips didn't let me know you uploaded i can't help but feel proud. You've come so far! Good deal
The hottest tuning project I've seen in a long time. With an incredible sound. Both thumps up .! With an incredible sound. Congratulations. Greetings from the land of the Nordschleife.
This video blew my mind! I already loved the Rx-7 and rotory engines. That dyno gave me goosebumps. Sounds gorgeous. Watching this I Wish I was more mechanically inclined. Beautiful job you guys! Wow!
It’s insane how you’ve normalized the craziest thing Mazda ever created. You sir are a true mazda guy. Not just that but your willingness to learn is admirable . High five to you sir
Not crazy for cars , but i love motorcycles. I can appreciate the work you have put in this. Went through similar bugs in my Kawasaki ZX14 turbocharged .
It's taken alot of time, fuck yeah it has, it's taken me 8 years to do nothing near the amount of work you have done, not to mention the learning process, the tools I had to buy, the everything you have to buy!!! The waiting, the going without, the problems and speedhumps. We are a special breed of people who dedicated our lives to doing things people who can only write dumb comments can't fathom.
I can definitely help you in the battery department Rob , please look at the selection guide and let me know what you want !! Let's eliminate that issue so the 4 rotor can boogie like she should !
I remember when Rob started this build my daughter was just born I'm now happy if she has now moved out and is graduated College and his car is just now moving
I strongly believe it has some 3 rotor blood in it. At the end of the vid just watch it light up the tyres and fart out flames. Rob youve made a demon. Hats off to ya, that 4 rotor has already exceeded my expectations 10 times over
Good work Rob. Awesome that you are learning how to do all your own work. I am learning a lot from your videos. I cant wait to see the progress of not only this build but all of them. I hope to see the vette whoop some ls butt here soon. Brap on brother
Not much choice i guess. I know the car is meant for high speed, but I still wonder what would happen if it had a "granny" gear. Something to idle around with, at high enough RPM not to foul plugs?
Yeah. It got that oil on it too and I thought it was recoverable. It’s not. I want to go even lower in gear to make it more street drivable and be able to swap between the two setups quickly
@@RobDahm well... you could also try clothes soap and water and let it soak for around 20-30 minutes, but need to clean it very quickly since it is significantly corrosive. (if the brake cleaner dont work.)
David pelkey the axles he had made for it are pretty beefy, super big diameter carbon fiber. my understanding is that carbon fiber also tends to break less on launches because it can flex a bit more than metal.
Phlying Phoenix I bet u they will find the weaknesses in the drive train if they slapped sum slicks on all 4 and launched it from a dig on a sticky track
Im not sure why this showed up in my feed but i dont think i have ever seen the author tell us what they are testing, results and adjustments they are making. Im not a car guy. i like the science and its design. Great work.
"I feel sorry for these people who live so close to the dyno garage. I have to apologize ahead, and stop AT 5 because they're literally so close!" Later... *does pulls and burnouts up and down the block*
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
You’re a fine example of someone who continues to learn and get better.
So basically good example of a human being. Lol!
And breaks stuff! Lol isn't just me
That's usually what happens when you break everything...🤣
Guy is a waste of like 20min intervals in life.
maybe one day he can learn to drive of the DYNO come on do it for dale
I hope everyone realizes how absolutely insane an AWD 4 rotar build is. This is ISNANE
this is car is literally a video game car now. a beautifully crafted machine and im hoping it could possibly get in the next forza horizon game.
truly a masterpiece in mechanics and engineering
blekut surely if we petition enough they’ll include it
That car will do Nurburgring in like 6 minutes.
@@sarmatiancougar7556 id love to see Rob take it to the ring. That would probably be bucket list for him. & it would be insanely fast there too
Im trying to figure how awd fronts are stationary on dyno. I missed something
Someone needs a hub Dyno.
Exactly what I was thinking.
Hub dyno. Get his attention.
I heard B is for Build has one
Came here too say this
Watch it snap the studs off
Idles like a V8, revs like an angry mosquito
Perfection
What kinda v8s have you been listening to?
Cody mate it deffo has the lumpy sound of a v8 with aggressive cams
@@MrHDPhoenix lumpy yes but no v8. Cammed straight six yeah
Cody want to try that sentence again?
Cody bro what
It’s weird to think Rob Dahm from 5 years ago is the guy that current Rob Dahm is letting tune this monster
Mind blown
Same dude that got cucked by UPS for almost a year lmao
Even weirder that the guy I subbed to probably 10 years ago because he had a yellow lambo and i was 15 is still doing shit I love to watch
Hahah I wouldn’t have trusted me either. But i am so in love with learning. It’s like a chart of my personal growth haha
@@RobDahm You said personal growth after talking about sporting a "personal growth" at the end of the video. Hahahaha
I wanna see a lot more hearing protection in that garage. Hearing aids can cost more than turbos
Safety first ngga
Cut first
Measure second
Safety third
They can cost like $6000 so even if they don’t care that you can’t hear, they’ll care that they need to pay that much to be able to hear...
@@Addison0526 this mans spent 100k on a project car, I'm sure hes fine
@@bigreddaman5988 He has, but those garage workers haven't.
Rob... You created a monster. It's impractical, loud, obnoxious, terrifying, probably dangerous and I'm guessing difficult to drive.
I love it.
'probably' dangerous
in other words. its perfect.
The thing's freaking ANGRY. I need a track video or something where it can breathe a little.
He said it’s a nightmare to drive due to the clutch
the thing that terrifies me is the transmission right next to him. if the gearbox explodes or a massive clutch fail, that could hurt really bad. if not worse.
10:09 World's First Billet 4 Rotor AWD RX-7... now with 4 wheel steering
"Daddy, is that a v12 f1 car?"
"No son, it's just rob dahm with the turbo 4 rotor"
*billet turbo 4 rotor. Don't forget the most important part ;)
TURBO 6 ROTOR (soon)
" No son, it's like the Mazda787B that kept winning the Lemans 24 hour, and they had to ban it because no won else could beat it " They banned it under the "loop hole" that it was not a reciprocating engine !
🤔Is it _technically_ an inline-four?
@@tommylyeah Boy, you don,t get rotary engines ! Remember each rotor has 3 combustion surfaces !
That thing sounds incredible. I’m really impressed with your understanding of the engine and how it requires different fuel percentages, for different rotors, in order to make them run together properly. It was interesting to listen to.
Solid video, Rob. Congratulations on building an inspiring vehicle.
2025 Rob Dahm: I tightened some random bolts on the 4 rotor and made 700 more horsepower!
By 2025 your gonna wonder which 4 rotor???
Plot twist:that’s actually the boost controller
More like 6 rotor
😂😂
That is if he doesn't die from all the face touching and mask-avoiding. In that case,he's just another statistic and the rotor dream dies with him.
1:21 does anyone remember when Rob added active aero?
Everyone who commented "Wheres the 4 rotor Rob ?"are now having eargasms.
Hahahhhha true true, this is the most eventful build(clutch theft, engine theft, ups lawsuit, sting operation) after B I F B Eleanor mustang build
Wheres the 6 rotor rob?
@@arutezza good question that.
I didn't comment that, yet i'm still having an eargasm
edit: scratch that, im creaming my pants, straight up
@@RENO_K what sting operation? i dont know if im drawing a blank or somehow missed that
17:17 literally the best sound ive ever heard come out of a car
Me on a Saturday: mowing the lawn
Rob Dahm on a Saturday: mowing the clutch.
After 5 pulls that clutch is as good as dead
It'll be smoother than a billiard ball
what clutch do they use on ken blocks monsters i wonder? does he have to replace them after every thrash.. rob needs a better clutch. i want to see the real power go to those wheels. freaking monster. i love this car.
@MrKalashnik0va interesting, good to know 👍🙂
"a gallon a pull" is all i need to hear to know that this thing is a BEAST!!!
The progression of Papa Dahm has been my favorite thing to watch the last couple of years. It truly gives me confidence in myself and completing my goals.
👍🏼
The fact we've watched a legend be born in this finely crafted machine is an honor bestowed upon us by divine creation.
Now I know what car decal to send you for your B-day "Unmeasurable Power" - Rob Dahm . ....lol. awesome accomplishment!
The Emperor from Return of the Jedi.... “UNLIMITED POWWWWERRRRR!!!” ... ( insert Sith Lightning here )
I swear you're everywhere lmao
Love the videos.
@@Fordman6546 thank you!... Tbh I'm just glad to be here, and at this moment I've never been happier to be on RUclips, I'm very fortunate.
@@Ayane13b nah we just both watch the best videos on RUclips!!
Rob: i wanna apologize to all these houses, we definitely have to stop at exactly 5.
Also Rob: 4 ROTOR STREET PULLS!
Heat shielding for that alternator my man. You have a bit of a fire hazard on your hands, and that car is too amazing to risk!
That was my first thought as well
BMW also uses water cooled alternators that might be worth a look.
Right on been watching you work on this nightmare off and on since the rotor issue glad to see it this far can not wait to see video of it on the street and maybe some day in person.rock on Rob 👍
So early rob hasn’t announced a new project yet
"Unfinished project"
Long - Term Project
The six rotor?
6 rotorr
Hahaha no joke wait until tomorrows video. 😈 but this one is to help build the rest of mine
Everyone is saying it but dang watching you from way back learn and grow over the years has been absolutely incredible.
Rob; "you heard it start up in the last video"
Us; "do you even check your videos lol?!?!"
last vid ended randomly right in the middle of wiring install.....
Yeah I had to go back and check to see if I missed one...
Right?! I was like wtf is he talkin about
i was about to comment this too haha
All of his videos just cut off randomly lol he does it on purpose
ikr :D
3:40 i used to live down the street from lucky 7 and trust me we can definitely hear the 3+ rotor cars really good! I enjoyed it very much but most people didn't care haha
Rob: **Makes over 1000HP in AWD**
Also Rob: **Let me just flex how much HP this makes in RWD** 🤣🤣
**Proceeds to make 300hp** lmao
@@kelldog44 Nah, it makes more but the Dyno can't keep up, that's why it's a flex 😂
@@joealex65 tires*
You're a fine example of what others want to be. And you're leaps and bounds ahead of any garage DIY guy. I wish you could tune all my cars.
It's clear to me now that this car would never have a final form.
The Saiyan of Mazdas
Rob called it a test bed, so by design, it will never have a final form.
This car is a final form, the final form of all rx7s
And it still can’t make a legit 4 wheel burnout.
@@dennisdatu6464 Im sure it could without the chain
That thing is unbelievable. Ive watched this entire build, and it still impresses the FUCK out of me. When he did that little clutch dump and bounced limiter for a second, wow. Theres not another car that makes a sound quite like that. Respect Rob. Seriously man.
@Rob Dahm
You can probably learn a LOT about alternators and electrical from the EXTREME Car Audio community there's a good possibility that you could benefit from a larger diameter alt pulley or just better wiring and grounds on your charging system...? Like, maybe a 0ga "big-3" or something? And a simple heatshield between the motor and alt could be VERY helpful too..?
I don't know what any of that means, but it sounds smart so I agree.
Big 3 & a nice lithium battery would be great for his setup, his alt wont have to do as much work & voltage would stay steady over 13V. Man spent 300k on the car, pretty sure he'd be fine paying 1k for a battery & thick wiring that wont let him down.
Extreme car audio is what those cars have who can flex chasis with their sub sound. Definitely I good way to lear more bout pulleys and energy in general as they demand enormous amount of power to work properly and not burn amplifiers or coils. Keep in mind some of those demo vans drop from 5k rpm to 800-600 or even engine stalls when they hit low hz tones, bcs of the energy they consume
@@Ayane13b Audio guys with big speakers go boom boom, so boom boom they can melt a power station. He is suggesting to use wires thicc as a dik and some alternator optimizations including some safety additions to avoid the bad burn burn. This car goes boom boom in a different way, but the power requirements are similar.
Iirc Rob's already using a pretty chunky alternator for this build?... I wanna say maybe a 300amp? And possibly made by Mechman or one of those types of companies, so the power should be there but one of the ways those companies build that much power from their alts is by using a smaller pulley, which is great at idle, but not so good for high rpms. I had a similar issue with a Singer alt on a turboed F22 engine that was having major issues at high rpms and we couldn't figure out what was happening but the minute I switched back to the stock alt the problems cleared up. Turns out it was the diameter of the pulley causing the alt to over-rev and create a considerable amount of EMI!?
Also, Isaiah is such a likable guy. I dare anyone to not like him! And his work looks amazing. You’re lucky to have him on board Rob.
I'm waiting for the "1500hp awd rx7 street pulls" vid
I admire you for taking so much precautions. One of the reasons i believe your creation is still running nicely!
What do you mean when it goes rich
This car is so insane, I can't wait to see it finished with a body on it. The quality of the videos has been amazing too, keep up the good work!
I just want to see it really ripping lol
rob is a genius. hes keeping the best for last
It’d be nice to see someone who could actually deal with all the power it has behind the wheel.
These past 3 vids of watching you after appearantly after RUclips didn't let me know you uploaded i can't help but feel proud. You've come so far! Good deal
Makes 12 million hp
Rob: aw its not even hitting boost
It is so satisfying being thru the journey! It's not over but it feels mostly complete! I'm glad I've been here watching
Can we get a sequel to the "Where's the 4 rotor" short film? Call it "Oh, there's the 4 rotor".
There is no need, the sequel was announced a while a ago. WhErE Is ThE 6 RoToR?
Rotary daddy please re-stock or make new shirts. 1 shirt = fuel for 1 pull
Half a Million dollar AWD RX-7 Turbo 4-Rotor towed on a Uhaul trailer....
Because ; race car
🤷♂️🤦♂️
Actually came to the comments to see if anyone else caught that 😂
Eh, could be worse.
Gotta save money somehow race sh*t ain't cheap.
The hottest tuning project I've seen in a long time. With an incredible sound. Both thumps up .! With an incredible sound. Congratulations. Greetings from the land of the Nordschleife.
“Today is the day” if I had a dollar for every time I heard that from you 🤣
Look's like a fire on the back of vette.
If you did, you’d have enough to build the 4 rotor😂😂
I read that and heard him say that in my head
I edit out “ok so” “ok so now” “so now” of the videos. I’m going to add “today is the day” haha
If you had a dollar for every time he said that you would have a finished awd 4 rotor
This video blew my mind! I already loved the Rx-7 and rotory engines. That dyno gave me goosebumps. Sounds gorgeous. Watching this I Wish I was more mechanically inclined. Beautiful job you guys! Wow!
"This is my monster and I have to control it"
Sound life advice, not just for handling batshit crazy Japanese witchcraft machines.
Frankenstein could've learnt from Rob
😂Japanese witchcraft machine
It’s insane how you’ve normalized the craziest thing Mazda ever created. You sir are a true mazda guy. Not just that but your willingness to learn is admirable . High five to you sir
1:20 active aero?
Thats what i thought
🤣🤣🤣
Would be good if he did it 4 real. Looked cool as fuck
The two of you all smiles doing street pulls is what it’s all about!! Awesome job man!
Who df disliked this video? Fight me.
The previous owner of the C5
The neighbors at lucky7.
@@alternergysolartech dead😂😂😂
Gamora. She hates everything.
Lol
His excitement at the 12:14 mark was great, glad to see you're having a good time with it, the Rx7 has come some far!!
the sound of that engine gives me goosebumps, and I'm not even there in person!
Not crazy for cars , but i love motorcycles. I can appreciate the work you have put in this. Went through similar bugs in my Kawasaki ZX14 turbocharged .
That's easily the best sounding RX7 I've ever heard.
Ok. Finally there!!! Can't believe it's at this point!!! Gotta take it back to the AWD Dyno. Definitely blowing the tires off. Congrats Rob!!!
15:13 that’s a nice display.
How in the world did you notice that XD
Thought we didnt notice but we did
Lol
I honestly thought I was the only one to notice because nobody commented😂
Got to make sure you close all Incognito tabs before tuning your car Hahahaha
Man these are the kind of videos I’ve been wanting to see for 5 years! Rob please have the interior look stock
If thing ever hits a race track you gonna need some good aero... BIG WINGGGG ENERGGGYYYYYY
Big fan energy talk to my main man Gordon murray
This thing would need 2 wings on the side holding it down
Purity 7 a jesko wing should suffice
Nothing better than a street test video with good auto! Need more street driving videos, so sick!
Now this is Epic!
I admire your tenacity sir. You are inspiration to all gearheads.
15:12 gotta love what rob dahm has as his logo on the digital gauges. lol
It's taken alot of time, fuck yeah it has, it's taken me 8 years to do nothing near the amount of work you have done, not to mention the learning process, the tools I had to buy, the everything you have to buy!!! The waiting, the going without, the problems and speedhumps. We are a special breed of people who dedicated our lives to doing things people who can only write dumb comments can't fathom.
This crazy and I can't believe the amazing 4 rotor sound!! Can't wait till its finally finished. 17:18 was really sick!
Thid is one youtube project i NEED to see in person some day.
That open compressor housing looks like it could swallow a small child
Rob: "huh. Made less power on that run, anyone seen danny?"
If it sucks in a child that just ate a Dorito, does that turn it into a 5-rotor?
This and adam lz's barra gt350 are some of my favourite cars on the internet because they aren't supposed to be done but their done so well
I can definitely help you in the battery department Rob , please look at the selection guide and let me know what you want !!
Let's eliminate that issue so the 4 rotor can boogie like she should !
I remember when Rob started this build my daughter was just born I'm now happy if she has now moved out and is graduated College and his car is just now moving
Press F to pay respect to the clutch 😂
Always with the tease. Looking forward to hearing it in full song.
Rob tuning on his own now? ditched that guy who did 399 pulls
I think that's the whole basis of the entire build is him learning to do stuff himself and doing stuff himself
@@lucysmith4242 well, that could end in an expensive way to learn things...🙈
@@frankotto83 💯
@@frankotto83 yup, thats the only way to do it
lol you're right, I should have just went WOT and blown the engine to bits on video for the entire world to see....
Quite honestly he has an insane amount of talent for him to reverse engineer his own ideas and bring them to life. I love every bit of these videos!
15:12 nice dash
Definitely a smart guy with the rotary stuff. His tuning is spot on.
yoo, loving the project, a lot of support from Serbia. man, i wish such cars were street legal in europe
im so happy for you rob finally being able to drive this after all the hard work and long hours !
"the power is immeasureable, and my toe link has ruined"
.
I strongly believe it has some 3 rotor blood in it. At the end of the vid just watch it light up the tyres and fart out flames. Rob youve made a demon. Hats off to ya, that 4 rotor has already exceeded my expectations 10 times over
I hope I can hear this car personally one day. Sounds insane
Good work Rob. Awesome that you are learning how to do all your own work. I am learning a lot from your videos. I cant wait to see the progress of not only this build but all of them. I hope to see the vette whoop some ls butt here soon. Brap on brother
no wonder the clutch is slipping... you've been burning it since you got it running.
Not much choice i guess. I know the car is meant for high speed, but I still wonder what would happen if it had a "granny" gear. Something to idle around with, at high enough RPM not to foul plugs?
Yeah. It got that oil on it too and I thought it was recoverable. It’s not. I want to go even lower in gear to make it more street drivable and be able to swap between the two setups quickly
@@RobDahm soak it completely with brake clean, and sand the clutch and face with 400 grit... then brake clean again.
@@RobDahm well... you could also try clothes soap and water and let it soak for around 20-30 minutes, but need to clean it very quickly since it is significantly corrosive. (if the brake cleaner dont work.)
I've been around plenty of high power cars, and that is a strong combo. You have yourself a runner for sure.
I think it’s time for a rotary insight Rob. Let’s swap the insight.
That would be a good car to prove how much power a single rotor could reliably make in an absolute sleeper car
👏4👏rotor👏civic
Yes!! Atkins Rotary 1 rotor and I think there’s an adapter on the market for a Mazda 3/6 fwd gearbox, this needs to happen!
I've been dying for a single rotor insight swap. But he loves that car
1990-91 Mitsubishi Eclipse GSX AWD Turbo 5-speed. Always and forever I will love that car. Good ol 4G63 power.
This car makes me so intrested in rotorys engines and what they are capable of 👍🏻👍🏻👍🏻👍🏻
This car is so sick great work buddy the sound of this car is out of this world
imagine this when there is slicks and a drag strip in front of it...
Janne Kokko broken axles
Apologies to the clutch right fucking now. Don't even mention that possibility, it will make it cry.
More like 230mph + in the half mile
David pelkey the axles he had made for it are pretty beefy, super big diameter carbon fiber. my understanding is that carbon fiber also tends to break less on launches because it can flex a bit more than metal.
Phlying Phoenix I bet u they will find the weaknesses in the drive train if they slapped sum slicks on all 4 and launched it from a dig on a sticky track
Im not sure why this showed up in my feed but i dont think i have ever seen the author tell us what they are testing, results and adjustments they are making. Im not a car guy. i like the science and its design. Great work.
This friggin thing is epic man. Congrats
It's been a good ride from here Rob. Thanks for the show
Why is this Camry build taking so long 🤷♂️
Can't rush art
That bang sounded so nice at 17:18
3:27 thought u was poping wheelies lol 😂 till I saw the trailer
My God ! Not a import guy but how could you not love this. Fantastic job
4 rotor hits dyno: property prices in a 20 mile radius drop by half 🤣
I'm super excited to see this car coming to fruition. I hope to see a Mazzei/Dahm video someday!
Rob done installed a DAS system on the rear when nobody was looking.
Our 7 king is alive !
My Montego blue FD bows down in awe 💯
"I feel sorry for these people who live so close to the dyno garage. I have to apologize ahead, and stop AT 5 because they're literally so close!"
Later... *does pulls and burnouts up and down the block*
Im so happy for rob for how far he came from with this build... one day im gonna replicate this. 🔥💯