Это видео недоступно.
Сожалеем об этом.
KTM WP shock servicing with selfmade bleeder and filler tool
HTML-код
- Опубликовано: 31 янв 2020
- Self made bleeder and filler for WP shockabsorbers.
Using a single clear tube system to see if there are any bubbles coming out or maybe going into the shock, makes sure the shock is definitly air free.
Don't forget to do maintainance on your shock regulary to ensure the best performance of your chasis.
You should position the shock such that the bleed hole is at the very top. That way any small remaining air bubbles will float out of the reservoir.
The way you have it laying sideways any remaining air bubbles will bee trapped inside the reservoir.
Yes, I know you pulled a vacuum. However unless you pull and Absolute Vacuum there will be some air still inside the shock.
Thanks for the video.
Hi I made a system really close yo yours but I today i tried and there are two things i would like to ask you. 1 how many psi do you use to pull inside the oil and 2 when i vacum the ammo doesnt go inside by itself i have to pull it inside slowly.same story on vacum mode
Excelente vídeo! Do you keep the shock body at only one position during all the procedure?
Would like to see some pictures of the plumbing and valving you have at the machine. Demonstrate how you switch from pressure and vacuum with the one line and not introduce air. I built mine just like dezertxer's in his youtube videos. Seems to work pretty good.
Hey mate im trying to find an air lubricator container like the one you have in the video. Is there anywhere i can buy one from
@@nicholaskuhne2402 seems to be a water filter housing
Muy buen trabajo 👍👍👌👍👌
How powerful is your vacuum pump? l/min ?
how much vac you pulling on that shock in the beginning? Do you finish it off with hand bleed after. I usually find there is still lots of air in there and have to invert the shock back and forth after 2 cycles of push pull cycle.
i know Im quite randomly asking but does anyone know a good site to stream new series online ?
@Gus Ulises Flixportal :D
@Dakari Maxton Thanks, I went there and it seems like they got a lot of movies there :) I really appreciate it !!
@Gus Ulises glad I could help xD
Hi
How much pressure is needed to fill the SHOCK ?
Moin, hast du eine Teileliste? Bzw. wo hast du die Sachen alle bestellt
Hello sir. Can i ask where can i buy this equipment
looks pretty cool and effective , can you advice how to fill nitrogen
I'm using original WP Tool on nitrogen, works fine, although I have filling needle as well
Hey can you send me your plan for your homemade tool ?
ciao,
the transparent vase is a filter holder for water ??
yes
Hey
Most of video consists of listening to vacuum pump running while nothing visible is happening. You should edit this out. Video would be 90% shorter and still convey same info.
Hey, kannst du mir vielleicht noch ein paar Informationen zukommen lassen über dein Vakuumgerät? Gerne per Facebook MOTO INDUSTRIES. Gruß Flori
Hey
Hast selbst gebaut?
Hi,
Jap alles selber gebaut :P
B. N. Top bist du Faccbook oder so
@@mcs-racing-offroad natürlich, ich kontaktiere dich! LG
@@b.n.4068 Hallo wollte nachfragen ob Sie mir vl die Anleitung und Bauteile für die Anlage schicken könnten.
Mit freundlichen Grüßen Seitlinger Mike
mike.seitlinger@hotmail.com
könntest du mir den bauplan und die bestellbezeichnung der teile auch senden bitte?