I gotta make sure my wife doesn't see this video or she's going to make me do this in our house!! Another great looking project with easy to follow instructions. Well done.
HAHA Ya I'm sure your not the only husband saying that to themselves after watching this video :) Thanks for watching and the support Billy. Keep up the good work on your channel as well.
I've done quite a few of these. A couple tips for anyone thinking of doing this. 1) If you have a tracksaw it's cheaper to cut your own strip. I did this primarily because I wanted hard edges and not beveled ones that the pre-primed material comes with. 2) If you do tip 1 make sure that you pre-prime the edges and light sand twice to get a seal before spraying which was my method. 3) Use wood filler spackle to fill holes. It is more dence and doesn't leave dimples when sanding. 4) The best method I have found for not having to worry as much about studs is to use no nail glue on the back to back pieces. 5) Cauling the edges stops tiny gaps from showing up over time and looks much better on the finish. 6) Make sure you use a low flow tip if spraying or your house with get dusted with paint lol. Learned that the hard way the first time I used a sprayer.
Nice job. I've done similar projects and a tip for those homeowners wanting to take this on: consider an initial coat of primer (though the MDF used in this video is pre-primed), use quality paint, make sure you inspect your project from many and all different angles to ensure you didn't miss any 'blind spots'. Also when you go to sand the spackle flat, make sure you get it perfectly smooth. A contractor won't necessarily care, but as a homeowner, all these trim pieces will eventually attract dust on their top sides and need to be dusted. If there are any little sharp bits left behind to snag your duster, it will. It's just a royal pain and it looks like crap to have bits of duster hanging from your project.
We do similar stuff. We do 10 degrees for splice, but we always break them over a stud to help prevent the joint from cracking down the road. Looks great, my sister wants this in her house.
Looks great! I did an accent wall this past weekend with wood slats across it. Looks great but was a lot of work since we used wood, like you said it bows out sometimes and was a pain to work with. One thing I’d recommend on yours is to replace the wall outlets and covers with black ones! Personal preference but I think it would look more seamless instead of white ones on the black wall.
When I do a project like this I never face nail. Toe nail everything. You save a ton of time with filling and sanding and don’t forget. It’s the professional way of doing this kind of work.
In Modern Living Rooms Everyone Using "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/
@@BYOTools Respectfully, there are SO many steps you’ve that you call “professional” that absolutely aren’t. You didn’t put a 1/8” mdf board down behind the 1x2. No pro puts accent trim right over drywall. For that size wall it would’ve run you 120 bucks in material and glue. I say glue because when is pros do these walls we use little to no nails. No nails means no nail holes. No nail holes means no nail holes to fill. We’ve tried everything..every manner of sparkle, bondo you can think of. The only thing that leaves a flawless finish is not nailing at all. Then you used a white caulk with a dark paint and proceeded to use WAAAAAY too much. Friend, that is going to crack out like a MUUUUUUUUUUUG. Your wall will look like a zebra in 3 months guaranteed. Yes, you can touch it up, but it’ll crack out again and again and again. You didn’t CA glue your joints like you should - that’s gonna crack out - the paint you’ve chosen is not ideal for brush touch up (which you’ll need to do ALOT bc the problem with dark colored walls like the one you’ve chosen is they’re now gonna act. Like a chalkboard. Any kid with a fingernail will write their name on there.) I’m a PM in resi construction and my trim guys who do this for a living on my million dollar builds make good money bc they’ve learned through trial and error that about 9 different thing you’ve done here will result in a terrible looking wall. It was a good attempt, but with a little know-how and about 200 more dollars that wall could look like it belongs in a million dollar house.
@@mvalovalo i dont know, its USA? i think Americans like nail pistols. I see this guy nailing mdf and im wtf dude is doing. Here in Europe for mdf i will use hybrid ms polymer glue and it will last and hold that mdf for 30 years. before i use this glue i will clear wall from paint in places where i put mdf. also guy is bad at paiting. im work with paints for 10 years and i will paint it normal 10 x nicer, or use better pistol, not this toy. but nopoint to use my 20$k paint pistol to this little wall. so manualy paint and job done . :D good luck with ur million dolar houses
i dont mean to be offtopic but does any of you know of a trick to log back into an instagram account..? I was dumb lost my password. I would love any help you can give me
Hello Byot, The color in the entrance hallway was very beautiful. A modern design with strong lighting. Occasional color and location changes are exciting. Congratulations. Health to your hands.🙂👍👏🙌
Awesome! As I was seeing you work every aspect of the accent wall, I was like : Man, I have every single one of the tools needed for the job and the tutorial, so what's preventing me now from doing it? I got to make it happend. Thanks a bunch!
Great to hear you enjoyed the project Carlito and love to hear that I have fans in the Philippines. Thanks so much for your support and PLENTY more videos to come :)
Thanks for you detailed video. I am a rookie and sawing and measuring but my wall came out great. Getting a lot of compliments. Had to pat myself on back
ive done more accent walls than i can count, id recommend adding construction adhesive on the back of the boards and wood glue on every joint. it will help with wood movement in the future.
Hi slarsonq, I'm thinking of DIY wall mouldings on plaster walls but a friend said the mouldings will crack after a few months due to plaster walls movement. Is that the case? How can I prevent the cracking from happening without adding a layer of MDF? Would liquid nailing the wall mouldings onto plaster walls work?
Amazing video! Definitely saved for later project. Thanks for sharing!! side note. i recommend using a pop filter for when you're recording. getting a lot of smacking/popping/ sounds from saliva.
just brought a new build home and we will be doing things like this and get the value up with accent walls and a stone wall accent as well. I also watched this video 4 times though to make sure I understand everything
Looks good. very good exexcution and attention to detail. One tiny little thing I would have done different is change the white electrical outlets to black to make them un-noticeable from far. Good work!
Hi. Great project and video. I actually did the exact same project for my newborn’s room. A fantastic feature. Loved hearing your tips and tricks. Thanks.
Thanks for such a great video. I’m not really a handyman guy but I will do my best once my house 🏡 is completely built by June, my only issue will be I will be installing a 86” TV on the center of the wall.
Excellent video. Loved the pace of the video with information where needed. I noticed your wall is still textured, I have seen folks flatten the texture before starting with accent wall and it looks sharper. Would you recommend that?
Nice project!! Looks fantastic!! BTW, I have that Porter Cable compressor and brad nailer. VERY happy with it!! 👍🏻 Thanks for the tip on Paint and Patch. Looks like a great product! It is now on my shopping list.
YEP! That the PC combo is a must have for any DIY'er haha. Great to hear #1 and thanks for watching and your support. Hope you used my link to pick up the Paint and Patch :)
A good way is if u pre paint strips before brad nailing place a small piece of painters tape when u will be nailing shoot nail into tape/into wood strip then leave tape take sparkle fill hole sand dab of paint then remove tape and you’ll never know where nail was
I gotta make sure my wife doesn't see this video or she's going to make me do this in our house!! Another great looking project with easy to follow instructions. Well done.
HAHA Ya I'm sure your not the only husband saying that to themselves after watching this video :) Thanks for watching and the support Billy. Keep up the good work on your channel as well.
Lol
Ha ha, you'll do it because you love her and are a good husband, I sense you are 🙂
we'll be moving into our new home in a month and I'm brushing up on my studies. My wife has a wall picked out for this (or another pattern) already
Lmao 🤣 😭
I've done quite a few of these. A couple tips for anyone thinking of doing this.
1) If you have a tracksaw it's cheaper to cut your own strip. I did this primarily because I wanted hard edges and not beveled ones that the pre-primed material comes with.
2) If you do tip 1 make sure that you pre-prime the edges and light sand twice to get a seal before spraying which was my method.
3) Use wood filler spackle to fill holes. It is more dence and doesn't leave dimples when sanding.
4) The best method I have found for not having to worry as much about studs is to use no nail glue on the back to back pieces.
5) Cauling the edges stops tiny gaps from showing up over time and looks much better on the finish.
6) Make sure you use a low flow tip if spraying or your house with get dusted with paint lol. Learned that the hard way the first time I used a sprayer.
What is a tricksaw and how is it cheaper?
@@rosemarybeyer8752 Its cheaper if you are a carpenter, its a saw that runs on tracks and saves a few coins on getting a shop to cut it for you
Nice job. I've done similar projects and a tip for those homeowners wanting to take this on: consider an initial coat of primer (though the MDF used in this video is pre-primed), use quality paint, make sure you inspect your project from many and all different angles to ensure you didn't miss any 'blind spots'. Also when you go to sand the spackle flat, make sure you get it perfectly smooth. A contractor won't necessarily care, but as a homeowner, all these trim pieces will eventually attract dust on their top sides and need to be dusted. If there are any little sharp bits left behind to snag your duster, it will. It's just a royal pain and it looks like crap to have bits of duster hanging from your project.
Can u tell me how wide he used ?
Like how wide r those lines
2inch? Or less than that?
@@ummeibrahim7461 - 1" x 2" MDF trim. He said that in the video. But actual size is 3/4 x 1 1/2 "
Brent!!! This is great. People are loving the new MDF trim on accent walls. Great video!!
So good to hear Mitch and my thoughts exactly. Thanks for all the support.
Really great, simple way to jazz up a space. And wonderful to hear Miriam Makeba, daughter of South Africa 🇿🇦 at the end
We do similar stuff. We do 10 degrees for splice, but we always break them over a stud to help prevent the joint from cracking down the road. Looks great, my sister wants this in her house.
I did something similar at my house and now someone wants me to do theirs very similar to this look. How much do you charge for something like this ?
Just built this and gotta tell u … ppl are impressed … thx so much
LOVE hearing this and thanks so much for sharing. Please send a picture if you can or tag me in a post. Would love to see the finished product.
Looks great. I'd probably match those outlets/covers with the wall cover too.
you my friend are the BOMB!!!!! you made me feel like i can do this myself. very informative yet you kept it simple and thorough. NICE!!!!
Saw the thumbnail and thought I'd like to do that and I'm sure I could on my own but very glad I watched as you had some really good tips, thanks!
Looks great! I did an accent wall this past weekend with wood slats across it. Looks great but was a lot of work since we used wood, like you said it bows out sometimes and was a pain to work with. One thing I’d recommend on yours is to replace the wall outlets and covers with black ones! Personal preference but I think it would look more seamless instead of white ones on the black wall.
Or perhaps a brushed stainless plate cover!
I was thinking the same. Ditch those white outlet covers.
When I do a project like this I never face nail. Toe nail everything. You save a ton of time with filling and sanding and don’t forget. It’s the professional way of doing this kind of work.
I like that you are not talking a mile a minute. Relaxing voice!
Hey Brent, what an interesting twist to a feature wall. i love it!
Thanks so much for your support Leah. It is always appreciated greatly :)
In Modern Living Rooms Everyone Using "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/
@@BYOTools Respectfully, there are SO many steps you’ve that you call “professional” that absolutely aren’t. You didn’t put a 1/8” mdf board down behind the 1x2. No pro puts accent trim right over drywall. For that size wall it would’ve run you 120 bucks in material and glue. I say glue because when is pros do these walls we use little to no nails. No nails means no nail holes. No nail holes means no nail holes to fill. We’ve tried everything..every manner of sparkle, bondo you can think of. The only thing that leaves a flawless finish is not nailing at all. Then you used a white caulk with a dark paint and proceeded to use WAAAAAY too much. Friend, that is going to crack out like a MUUUUUUUUUUUG. Your wall will look like a zebra in 3 months guaranteed. Yes, you can touch it up, but it’ll crack out again and again and again. You didn’t CA glue your joints like you should - that’s gonna crack out - the paint you’ve chosen is not ideal for brush touch up (which you’ll need to do ALOT bc the problem with dark colored walls like the one you’ve chosen is they’re now gonna act. Like a chalkboard. Any kid with a fingernail will write their name on there.) I’m a PM in resi construction and my trim guys who do this for a living on my million dollar builds make good money bc they’ve learned through trial and error that about 9 different thing you’ve done here will result in a terrible looking wall. It was a good attempt, but with a little know-how and about 200 more dollars that wall could look like it belongs in a million dollar house.
@@mvalovalo i dont know, its USA? i think Americans like nail pistols. I see this guy nailing mdf and im wtf dude is doing. Here in Europe for mdf i will use hybrid ms polymer glue and it will last and hold that mdf for 30 years. before i use this glue i will clear wall from paint in places where i put mdf. also guy is bad at paiting. im work with paints for 10 years and i will paint it normal 10 x nicer, or use better pistol, not this toy. but nopoint to use my 20$k paint pistol to this little wall. so manualy paint and job done . :D good luck with ur million dolar houses
i dont mean to be offtopic but does any of you know of a trick to log back into an instagram account..?
I was dumb lost my password. I would love any help you can give me
I used your tutorial to make an accent wall for our church’s video studio! Thanks for making a video that was super helpful and easy to follow!
Absolutely beautiful! Love the voice and oh, the color of the wall too. Lol
Love hearing that Tonya and thanks so much for your support.
Hello Byot, The color in the entrance hallway was very beautiful. A modern design with strong lighting. Occasional color and location changes are exciting. Congratulations. Health to your hands.🙂👍👏🙌
Love hearing that Volkan and thanks so much for the kind words and continued support. This transformation was amazing!
@@BYOTools 👏👍🙂
Finally doing this over the weekend. Took me 2 years to muster up the courage. Thank u so much it's gorgeous 😍
how did it go
This project looks really cool! Nice result and great color choice! Now let’s convince wifey to do something similar!! 😁
Haha right?! Thanks so much Jerome and keep up the great work on your channel.
Looks great. How much do contractors charge to do this generally?
Looks awesome!
You should do it for her as a surprise; and if she hates it at least you still love it and it's already done. Lol
Difficult part to convince 😕 😪 wifey....
Awesome! As I was seeing you work every aspect of the accent wall, I was like : Man, I have every single one of the tools needed for the job and the tutorial, so what's preventing me now from doing it? I got to make it happend. Thanks a bunch!
Thank you for the tips. I just did this wall and it took basically 2 day. And it turned out fantastic
this looks INCREDIBLE! I love the color
Best video Ive seen yet! Thank you!
Love hearing that molly. Thanks so much for watching and hope you subscribed :)
Greeting Brent, Philippines in da house. Another fun project, well done. Keep these videos coming man.
Great to hear you enjoyed the project Carlito and love to hear that I have fans in the Philippines. Thanks so much for your support and PLENTY more videos to come :)
Up. 👌🏼
I did something similar. Matte black background and glitter black gloss tape on top. Turned out gorgeous!
One of the BEST accent wall tutorials I’ve seen so far! GREAT JOB!😍😍😍😍
That's really good, I recommend using Floetrol for latex paint to prevent the orange peel you got on the MDF trim, it comes out smoother
I rarely comment but this was freaking awesome!
This was one of the best video I've ever seen 👏
This wall accent is 🔥🔥🔥!
Wifey wanted me to build one for the nursery and this is one of those designs i like!! Nice work bro!!
$$$$+ idea and $$$- cost. Super elegant DIY project.
Great accent wall, even greater with the Miriam Makeba song. Lol
Looks great. I’m about to do my dining room wall because of your video!!💪🏾💪🏾💪🏾💪🏾
This is a great video! Would you by chance have a video that shows how to properly set up the taping, paper, plastic, etc? Thank you!
Thank you for this video. It’s just what I’m looking for and I love all your details. Thank you.
Excellent tutorial! You the real MVP. I followed your steps, completed this project in about 6 hours.
Around how much was your entire project
@@liljune8209 $230. $100 of that total was rental of the chop saw and nail gun.
I will have to admit that I do agree with you. "That wall is one sexy beast !" Great job! It's gorgeous!
I recommend painting the socket covers the same color as the wall so they blend with the wall.
No, it serves as an accent to the accent wall. 😊
@@i3_13 I hope ur kidding
Looks fantastic! Love the change.
Thanks so much for the kind words Lisa and great to hear you enjoyed the project.
Indeed, it's beautiful.
Nice job and thanks for explaining how to achieve this look !!!
I saw this video when you initially made it, but finally got around to completing it today. It truly came out amazing. Thanks for the tips!
Thanks for you detailed video. I am a rookie and sawing and measuring but my wall came out great. Getting a lot of compliments. Had to pat myself on back
ive done more accent walls than i can count, id recommend adding construction adhesive on the back of the boards and wood glue on every joint. it will help with wood movement in the future.
Isn't that the point of using MDF, though? With MDF you don't have wood movement.
Hi slarsonq, I'm thinking of DIY wall mouldings on plaster walls but a friend said the mouldings will crack after a few months due to plaster walls movement. Is that the case? How can I prevent the cracking from happening without adding a layer of MDF? Would liquid nailing the wall mouldings onto plaster walls work?
Amazing video! Definitely saved for later project. Thanks for sharing!!
side note. i recommend using a pop filter for when you're recording. getting a lot of smacking/popping/ sounds from saliva.
just brought a new build home and we will be doing things like this and get the value up with accent walls and a stone wall accent as well. I also watched this video 4 times though to make sure I understand everything
Ugh... yes! I've been looking for this! Thank you!
This is absolutely beautiful. I love this dimension accent.
I love your Miriam Makeba Pata Pata music at the end of the video as well❤
Great job man. The accent wall came out beautifully. I might do one of those in my house!
Nice timing i was just looking for a nice wall design thank you
Nice interesting video clip, This information will be very useful for many, Thanks to the author of the video, everything was normal!
beautiful....plus the commentary was great!!!
My floor just similar like your floor color,now I know what it will looks like if I add this awesome work.Thanks for sharing !
Ur best . Such informative video.
That is artsy, modern and beautiful to look at, great work!
Looks good. very good exexcution and attention to detail. One tiny little thing I would have done different is change the white electrical outlets to black to make them un-noticeable from far. Good work!
ou la la! looks beautiful!
Class job. Looking in from Ireland 🇮🇪
Wow that wall looks amazing
Looks good, solid work 👍
Best accent wall video
Thank you for the ideas, cheering you from Miami
Okay, now I need to tackle this!!! Excellent work!!!
Nice fit with the modern door and sidelite window.
Nice! Did this 4 months ago in my dining room, my friends love it
Oh niiiiice! I have a huge blank wall in the movie room and this would definitely work. THANKS!
Hi. Great project and video. I actually did the exact same project for my newborn’s room. A fantastic feature. Loved hearing your tips and tricks. Thanks.
the only thing i would recommend is to pre paint the wall and the trim. then once done go over one last time for a final coat on just the trim pieces
Looks great. I'd only change out the white outlet plates to black! Thanks for the informative video!
Thanks for the tutorial. Just completed my accent wall.
It's spectacular and lots of great advice along the way! LeGrand makes matching gray outlets and covers-that's the only change I'd make.
Beautiful love the design.
This is pure perfection 👌🏾 I need it!
Love it. Will keep it in mind for my apartments
wearing a mask alone, outdoors and indoors.....wow, this is better than anything on Netflix.
What a special guy.
🤮
This guy is a total idiot. I don’t care how “cReAtIvE” he tries to be. Lost all credibility by doing that.
Great job man, really thought you did awesome in prepping and finishing!
I litteraly just liked and subscribed because of the song at the end😂🙌.Wow!
I really didn't expect that🤯😂🇿🇦
Love the accent wall, well done.
What a beautiful house, wish i can have one like that some day
Great video Brent! Always quality content!
Truly appreciate the support Ivo and I take pride in the videos I produce. Glad that stands out.
Sweet work and sweet music to wrap up the video.
Very very nice wall Like this good jobs
This was ridiculously satisfying. You gave me a great idea for my DIY room divider. Thank you!!
Loved it man..hope one day i will do it to my farmhouse wall.
Good work. Doing this soon in my office.
Thanks for such a great video. I’m not really a handyman guy but I will do my best once my house 🏡 is completely built by June, my only issue will be I will be installing a 86” TV on the center of the wall.
Excellent video. Loved the pace of the video with information where needed. I noticed your wall is still textured, I have seen folks flatten the texture before starting with accent wall and it looks sharper. Would you recommend that?
Great job 👏🏼
Really does lift the whole place 👍👍👍
Wow. Beautiful work!
Absolutely love this!
SUPPER Happy when I come on line and see you have done something I plan on doing in the near future! Thank you.
Love hearing that Tyson. Good luck on your project!
I'm lunchtime happy over here!
Amazing. Great colour too.
Nice project!!
Looks fantastic!!
BTW, I have that Porter Cable compressor and brad nailer. VERY happy with it!! 👍🏻
Thanks for the tip on Paint and Patch. Looks like a great product! It is now on my shopping list.
YEP! That the PC combo is a must have for any DIY'er haha. Great to hear #1 and thanks for watching and your support. Hope you used my link to pick up the Paint and Patch :)
A good way is if u pre paint strips before brad nailing place a small piece of painters tape when u will be nailing shoot nail into tape/into wood strip then leave tape take sparkle fill hole sand dab of paint then remove tape and you’ll never know where nail was
I love ❤️ this! Where are the pictures of the entire home! I’d love to see it.
Cheap, easy to make and heaps looking good !
Looks very cool!
maybe try 38x25 trunkin and you can run cables in the truckin and put LED's on the wall aswell.
Great job.....looks awesome!!!
This is the best one i have seen