This can be programmed on a control from 1980's. Just Needs a Fanuc control equipped with Macro B option on a lathe with a servo driven spindle (and Y-axis in this case).
Trichoidal milling will blow your mind then, its worth checking out. It really displays how little we humans can think like robots. Simple(ish) coding changes like this can speed up the manifacturing of a part quite immensely.
@@robokid20001 the servos are fine with anything you throw at them. Better bump up the lubrication dosage if doing that with the ball screws all the time though
What a great man sharing this and also the code. Respect…and who ever is designing parts like that the opposite. Not because something can be done it means it should be done okay?
You say turning worm, i say that CNC is just feeling the vibe, getting a groove going... Lmao Hanging out, waiting on their chance to solo... Damn code has gotta be flinging by, just iterating on diameter and surface feed? Slick either way, like external Trichoidal milling. Super slick
I did similar eccentric machining on swiss lathe, Fanuc can handle F30000. or even more as your code shows, but Mitsubishi M70/700 can't go more than F8000. Good trick anyways!
If you want to learn how to do this on a 2 axis CNC lathe without a C axis follow me. I will try it one day and it can be done if not needing good accuracy. (might take a year for me to be bored enough)
You see here if that stepper motor is doing this and not crank and cam it is a new fascination running electric motors with ignition systems proximity has become dead head !!!
You could also write WHILE[#103LT600]DO1; ... END1; WHILE statements are safer than GOTO spaghetti programming. Also in this case a local variable like #100 is preferred over global variables #500 because it's not used outside of the program so you keep that global variable clear for other uses Wish I could try that to impress my colleagues but I only have a C-axis doosan
I have a cnc lathe 4 axis Y and C axis fanuc May you help me please. Is this code enough? Can you write it for me GOCO #503=0 GOX30.Z2.YO GO Z0.1 N1 G3X18.W-0.053.H-180.60000 G3X30.W-0.053.H- 180. G1H0.5 #503=#503+1 IF|#503GT600]GOTO12 GOT01 N12G0X100. Z250.
hi. I tried this program, I have a problem though. C axis is not spinning constantly, it has some seconds pause after a round or spin. I took a short video however I couldn’t send it here
Even left the code on screen. What a guy 😊👍 Great job
Amazing stuff. 😊
I did cnc a while ago. I knew things would advance but this i didn't even think of
@Loisl Ali truly spoken like someone who has no idea what they're talking about
This can be programmed on a control from 1980's. Just Needs a Fanuc control equipped with Macro B option on a lathe with a servo driven spindle (and Y-axis in this case).
Trichoidal milling will blow your mind then, its worth checking out.
It really displays how little we humans can think like robots. Simple(ish) coding changes like this can speed up the manifacturing of a part quite immensely.
@@MF175mp And the carriage servos have to be able to work overtime without toasting lol, that's a lot of continuous back and forth!
@@robokid20001 the servos are fine with anything you throw at them. Better bump up the lubrication dosage if doing that with the ball screws all the time though
What a great man sharing this and also the code. Respect…and who ever is designing parts like that the opposite. Not because something can be done it means it should be done okay?
These kind of shafts are used in progressive cavity pumps
any time you see a crank shaft, millions of parts every year are made like this :)
G17 plane of interpolation. Nice work
Whenever I see cnc's doing these types of operations I always imagine the control having a personality and going "you want me to !@@!*&#^ what!😂
You say turning worm, i say that CNC is just feeling the vibe, getting a groove going... Lmao
Hanging out, waiting on their chance to solo...
Damn code has gotta be flinging by, just iterating on diameter and surface feed?
Slick either way, like external Trichoidal milling. Super slick
Автор, ты просто молодец! Браво!
I love a little present at the end.. Thank you for the code!
Gotta try this on the cnc now, props to you my good man
Amazing! Usually, when something comes out of the lathe looking like that, it's a bad day at work.
Impressive!
I really want to learn these types of programming but i don't know where to start
Very freaky looking. There are so many tricks & forms possible with a lathe that achieve unexpected results.
thats pretty fast,
amazing
I did similar eccentric machining on swiss lathe, Fanuc can handle F30000. or even more as your code shows, but Mitsubishi M70/700 can't go more than F8000.
Good trick anyways!
It takes a powerful and rigid machine to cut like that.
Учитывая код в начале C0 - это фрезерный режим, но работает резец.
You are right, it is milling mode.
Awesome creations
Thanks to you for
Sharing with all of us
Very good, my friend, i don't know if i can do this🥰🥰🥰👍🏻👍🏻👍🏻
Very nice, looks good
CNC ஆபரேட்டர் உபயோகமானது சூப்பர்
That looks cool 👍
That’s freekin cool
That is awesome!!
Ouch to the wedge/simulated y axis. Very fun though
Даже программу по командам скинули)
Ich werde das ausprobieren 😅
Antworte Mal, wenn du das gemacht hast
Und wieviele Rotoren haste gedreht
это что? штопор для извлечения пробок?
AWESOME 👍
If you want to learn how to do this on a 2 axis CNC lathe without a C axis follow me. I will try it one day and it can be done if not needing good accuracy. (might take a year for me to be bored enough)
This is the best illusion.
My eyes my, precious eyes
Mesmerizing!
Hipnotizante 😮
Great work
R3. A cosa si riferisce signore? Grazie
Omg whats the g-code. I need to try rhis on our new lathe
Hi. Use milling Mode and G17. Code is at the end of video.
Why would ANYONE need to ask such a silly question?
So this how mom made her nightstand drawer worm. Cool.
Did you do this in the 'technology cycle'?
It is made for show
Gajab
Yo! Is that slang for good job lol
Wow 😮😮 only y-axis lathe can do this work?
To do it right you have to use Y axis.
@@CNCPL1 thank you sir
I would like to see the finish pass
So nice ✔️
Awesome
Wow😮
Does anyone know What mazak 200 conversational numbers would be to make this on my cnc lathe. I would really like to try this.
Easy peasy❤
Congratulations
But can it be done with 2-axis lathe?
Thank you
To do it right way You have to use 3axis. Maybe somehow You can do it witam 2 axis
@@CNCPL1 How could I do with 2 axes?
@@CNCPL1 isn't that x y z +virtual c axis? without a y axis, you can't
I have 2 axis cnc x and z axis Siemens controller plz guide me to do rhis type program
You see here if that stepper motor is doing this and not crank and cam it is a new fascination running electric motors with ignition systems proximity has become dead head !!!
すげーな
そしてCコードなんて使ったことない🤥
Do you need a Y axis a lathe ?
Man, I do that with my cheap Chinese mini lathe right out of the box
Good job
wow great
You could also write
WHILE[#103LT600]DO1;
...
END1;
WHILE statements are safer than GOTO spaghetti programming. Also in this case a local variable like #100 is preferred over global variables #500 because it's not used outside of the program so you keep that global variable clear for other uses
Wish I could try that to impress my colleagues but I only have a C-axis doosan
Thanks for the tips 👍
If aliens were ever to capture a human being they would just play him these videos so he calms down
grazie della risposta.
puoi girarmi il programma utilizzato.
grazie
Hi, at the end of video there is program or in description in full video on my channel.
Eksantrik bir düzlem yapmak istersem nasıl bir program kullanmalıyım
It's like that pencil wombling trick
Матрица 🗿🗿
Is the H value in the program the incremental axis for the C axis (Spindle)?
Yes
His supervisor is going to be pissed when he sees his zero tolerance rod 😅
Wow
Amezing
Que software uso para hacer ese programa.
None. The code is my idea.
Wow, no CAM?
No cam. Code is simple, after every turn, machine turn 0.5 degree in C axis and thats all.
Nice
it's 2 Axis turning or turn mill Machine
Turn Mill machine with Y axis
Оботроты - подача - сколько?
Feed is turning speed. Its milling Mode use G98. Try F10000 and go higher if it will be to slow.
Hips Don't Lie 🤣
The trick would be to make it not a worm, and parallel, surely?
👍👏🏻
Syntec?
Can we do this on CNC lathe fanuc Oitf
Its made on fanuc, You need Y axis to do it, just copy code, use X Y G17 plane and do it in milling mode and thats all.
I dont have y axis 😢help me out with this program
Please upload a macro program without y axis
🤯
Bet theirs a Chinese kid somewhere who can do this manually and still get it smooth finished 😂
Красота
Как это сделать?
Ye konsa machine hai....
Dmg moriseiki nlx2000
If any power failure occur while running, what will happen.
Nothing will happen, this is made for show.
If power fails, the CNC Lathe will stop.
Залипаловка)
Wiggle wiggle
quindi su un tornio con solo 2 assi (Z X) non si può fare?
You need Y axis as well. There is no Y axis in program but machine is doing circles in Y axis
@@CNCPL1 grazie mille delle risposte.
quindi non c'è un modo per farlo sul mio tornio?
C축
It programmed like milling
Yes
Hi this program for fanuc controller
👍
ma da quello che vedo hai l'asse C vero?
Yes, You are right
Please teach me
Makro kod kullanmadan nasıl yazılır BU baska program
yazılmaz çünkü içinde hesap var ve c ekseninde herturda kayma var.
برنامه نویسش مست بوده🤣🤣
Is This GCOD enough?
You have to use milling Mode, need Y axis, G17 and G98. Thats all
I have a cnc lathe 4 axis Y and C axis fanuc
May you help me please. Is this code enough?
Can you write it for me
GOCO
#503=0
GOX30.Z2.YO
GO Z0.1
N1
G3X18.W-0.053.H-180.60000
G3X30.W-0.053.H- 180.
G1H0.5
#503=#503+1
IF|#503GT600]GOTO12
GOT01 N12G0X100.
Z250.
hi. I tried this program, I have a problem though. C axis is not spinning constantly, it has some seconds pause after a round or spin. I took a short video however I couldn’t send it here
@@mohsenre6564It depends of machine, I had the same on doosan, maybe you can try to do it in subprogram.
@@CNCPL1 my machine is Goodway, how can I do it in sub program?
Simulation is glitching again guys
Show
3.5" floppy
G code
It's a macro program 😮😮
Oh my god 😱 wtf?
Okuma?
DmgMoriSeiki
Code
ima think of this if i ever get asked if i'd love my GF as a worm