How to Make a Silicone Mask Part 2: Finishing the Epoxy & Fiberglass Mold
HTML-код
- Опубликовано: 16 сен 2024
- SUBSCRIBE on RUclips: bit.ly/Zp70T4 and RING THE BELL!
Watch FULL COURSE: bit.ly/SilMaskM...
COURSE DESCRIPTION
Learn to finish an epoxy & fiberglass mold with Immortal Masks' lead mold maker, Mike Cooke. Picking up where he left off in Part One, Cooke guides you through the remaining steps of the silicone mask molding process, including fixing sculptural imperfections, adding pry points, molding the back of the sculpture, and finally, trimming the mold and getting it ready for casting. If you've ever wanted to create your own custom silicone masks, this course series will show you how!
COURSE HIGHLIGHTS
Flipping the Mold & Fixing Sculpture Imperfections
Adding Pry Points
Molding the Back of the Sculpture
Trimming Edges & Drilling Bolt Holes
Opening & Cleaning Out the Mold
Adding a Pour Spout & Bleeder Holes
Approximate Run Time: 02:46:26
Watch FULL COURSE: bit.ly/SilMaskM...
--------------------------------------------------------------------------------
About Mike Cooke: bit.ly/MikeCooke
--------------------------------------------------------------------------------
RELATED Courses from Stan Winston School
HOW TO MAKE A SILICONE MASK PART 1 - EPOXY & FIBERGLASS MOLDING
bit.ly/SilMaskM...
HOW TO MAKE A SILICONE MASK PART 3 - CASTING & DEMOLDING
bit.ly/SilMaskM...
HOW TO MAKE A LATEX RUBBER MASK PART 1 - THE SCULPTURE PROCESS
bit.ly/MakeLat...
HOW TO MAKE A LATEX RUBBER MASK PART 2 - MOLD MAKING & CASTING
bit.ly/MakeLat...
HOW TO MAKE A LATEX RUBBER MASK PART 3 - PATCH, PAINT & FINISH
bit.ly/MakeLat...
MAKE A MASK - WEARABLE DYNAMIC ART PART 1
bit.ly/HowMake...
MAKE A MASK - WEARABLE DYNAMIC ART PART 2
bit.ly/HowMake...
HOW TO MAKE A MASK - WEARABLE DYNAMIC ART PART 3
bit.ly/HowMake...
HOW TO MAKE A MASK - WEARABLE DYNAMIC ART PART 4
bit.ly/HowMake...
HOW TO MAKE A MASK - WEARABLE DYNAMIC ART PART 5
bit.ly/HowMake...
CREATURE MASK PAINTING
bit.ly/PaintMaskYT
SILICONE PAINTING - REALISTIC FLESH TONES
bit.ly/RealFle...
HYPER-REALISTIC SILICONE PAINTING
bit.ly/SilSkinP...
--------------------------------------------------------------------------------
JOIN the Stan Winston School Community!
www.stanwinsto...
/ stanwinstonschool
/ swinstonschool
/ stanwinstonschool
/ stanwinston
Visit our WEBSITE: www.stanwinsto...
SUBSCRIBE to SWSCA on RUclips: bit.ly/Zp70T4
All Music by Position Music
Buy the FULL COURSE here: bit.ly/SilMaskMakingPt2YT - Balázs
Does it show how to make molds for silicone masks efficiently, or just how the biggest company does it? I am debating getting the course, but if the only method shown is one not designed for the average mask maker, only for the top-of-the-line, then I dont see it as a benefit to me.
@@J0SHUAKANE
Hi! Here you can find the full Curriculum:
- Title & Introduction
- Flipping the Mold & Cleaning the White Clay
- How to Avoid Damaging Your Sculpture
- How to Fix Imperfections & Add Pry Points
- Molding the Back of the Sculpture
- Trimming the Edges & Drilling Bolt Holes
- Opening the Mold
- Removing the Core from Side B
- Cleaning Side A
- Cleaning Side B & The Core
- How to Estimate Silicone Volume
- Adding A Pour Spout & Bleeder Holes
- Wrap Up
- A Discussion with Andrew, George & Mike
@@J0SHUAKANE And this is a 3 part course series, where you can learn much more:
Silicone Mask Making Part 1: Epoxy & Fiberglass Molding: www.stanwinstonschool.com/tutorials/silicone-mask-making-part-1-epoxy-fiberglass-molding-a-sculpture
Silicone Mask Making Part 2: Finishing The Epoxy & Fiberglass Mold:
www.stanwinstonschool.com/tutorials/silicone-mask-making-part-2-finishing-the-epoxy-and-fiberglass-mold
Silicone Mask Making Part 3: Casting & Demolding: www.stanwinstonschool.com/tutorials/silicone-mask-making-part-3-casting-and-demolding
@@StanWinstonSchool gee, an automated copy/paste response. You had someone read my comment enough to respond, but didnt care enough to write a response. At least then, maybe i could have a discussion to make progress & perhaps gain some understanding. Instead, you take the worst route possible, by not directly answering my question, but instead reposting the same things they said in the video & description. I took the time to type out a real question & you dont feel its worth your time to type a real response? Nice way to make people feel like you think you are above them.
Hey @@J0SHUAKANE sorry if the above answers caused inconvenience. In this 3-part course, you can learn the techniques Immortal Mask uses for creating their incredible masks. Answering your original question, you can learn the actual molding steps in Part 1. That course includes mapping the seam, clay-up, laying registration keys, gel coats, layering epoxy and fiberglass, etc. You can see the details here: ruclips.net/video/65dDPSXhweY/видео.html.
If you would like to check the materials, scroll down, and you will see a complete material list: bit.ly/SilMaskMakingPt1YT.
You have to decide if it's an efficient molding process for you. It's Immortal's proven technique, and they share their knowledge and every detail of their technique.
Love how he says "lets get to it" and the video ends.
hello, how do you make sure that the gelcoat does not stick on part A when you applied part B?
Amazing..
Can you make a life like mask for someone who has been surgically disfigured on one side of their face?
Los cursos están en español?
Hey @LOPE, We have some Spanish closed caption courses. Check them out here: www.stanwinstonschool.com/landing_pages/spanish-latin-american-close-captioned-on-demand-webcourses - Adrienn
Can you make any face ?
No, but you can with the help of our online courses! Check out our school here: www.stanwinstonschool.com - Balázs
How's it with Stan Lee gone?
mbayne26 Stan Winston is a famous costume, effects, and animatronics pioneer. He headed the making of the giant T-Rex from the first Jurassic park movie. Stan lee is the guy who created a lot of the marvel superheroes that have been adapted into Marvel movies. Two different people but I understand your confusion.
@@cristofercalleros1906 batman will never be the same