Hi hope all is well, i tried but the v2 shafts are different than the v1 shafts , so i ended up buying a set of assorted 8mm pinion gears from 46 to 50 tooth mod 1, i removed the 39 tooth spur on the shaft and replaced it with a 49 tooth gear meshed a 27 tooth pinion on the motor and it seemed to do the trick, cooler temps and about 80mph on 8s. I watched jaytee rc and he did the same on his limitless a few years ago.
The driveshafts are stock out of the box length, and the diff is the stock 46t Infraction/Felony diff (part # ARA310989). The tallest pinion with this setup is a 27t, if I'm not mistaken. It's simply a drop-in and you're away to the races!
Thanks for the reply, so that we are on the same page infraction or felony diff would work and as far as front and rear drive shafts, you used the stock ones from the limitless, or did you use the ones from an infraction. What I'm getting at is on my v2 with the spool removed my front and rear shafts are the same size so I would think that the front would reach but the rear wouldn't .
Yes, I used the stock driveshafts from my Limitless V1. I understand what you're saying about the V2, but as far as I understand, the center spool/diff are positioned further back on the chassis, to prevent the rear driveshaft from flopping around at high speeds. This, however, shouldn't affect the fitment of the Infraction/Felony center diff. It should still drop right in.
Hi hope all is well, i tried but the v2 shafts are different than the v1 shafts , so i ended up buying a set of assorted 8mm pinion gears from 46 to 50 tooth mod 1, i removed the 39 tooth spur on the shaft and replaced it with a 49 tooth gear meshed a 27 tooth pinion on the motor and it seemed to do the trick, cooler temps and about 80mph on 8s. I watched jaytee rc and he did the same on his limitless a few years ago.
Perfect! Glad it worked out!
Could you make a video showing the diff up close and the driveshaft lengths used to make this work?
The driveshafts are stock out of the box length, and the diff is the stock 46t Infraction/Felony diff (part # ARA310989). The tallest pinion with this setup is a 27t, if I'm not mistaken. It's simply a drop-in and you're away to the races!
Thanks for the reply, so that we are on the same page infraction or felony diff would work and as far as front and rear drive shafts, you used the stock ones from the limitless, or did you use the ones from an infraction. What I'm getting at is on my v2 with the spool removed my front and rear shafts are the same size so I would think that the front would reach but the rear wouldn't .
Yes, I used the stock driveshafts from my Limitless V1. I understand what you're saying about the V2, but as far as I understand, the center spool/diff are positioned further back on the chassis, to prevent the rear driveshaft from flopping around at high speeds. This, however, shouldn't affect the fitment of the Infraction/Felony center diff. It should still drop right in.
Thanks a bunch!!!
No problem! I hope it works out! 👍🏻