All right ! I got my Vendetta on the bench. Rainy here this weekend so I'm not going to get my shot at 100. Always like to watch while I work on my projects. Cheers Eman
Thank you again I’m saving up for a used limitless or maybe V2 got kids, 2 boys, but I want that killer yellow and love the Formula 1 wheel staggered setup. I really think I might just send it to you but then it wheel be too fast. Seriously. lol 😂. Thank again Earl you’ll get it. U always do
Man that sucks, the stock mount didn’t work. I’m almost sure Arrma will have the slider for the big block” for sale” asap! I’d love to see you drill out the stock slider because if that works, I’ll do it. I’m thinking maybe the Dual lock is too thick. The 3m double sided tape is thinner and may lower the esc enough. It holds better also in my opinion. She’s coming along nicely 👌🏾🤙🏽
Arrma costing customers more my ney than necessary, why change the dam motor mount. Nice one Earl, pointing out these things really shows the incompetence of these companies.
That looked like fun. An your son gets mad when you put the dad smash on him. Lol. Good times with the family. I love rcing with my girls. Great video bro.
Anyone know of a company making an aftermarket motor mount for the Vendetta? I noticed today I can't gear up any larger than the factory 26 with out blocking access to the screws in the motor mount.
I think its the way you positioned the esc. From other videos. I've seen the esc placed differently without issues. Or at least they didn't say it was an issue. Idk
Arrma should hire you to prove out their designs before they release them to the public. Obviously they hurried to get this out without doing a full build to test it. Still a great looking car, and it'll surely rrrrrip, but those little fitment details...
Trust me I said that many times Earl is a very mechanical inclined, electrical inclined, ect. His is the king of all R/C I think he may have all the R/C’s point is that if they hired he would honestly Have R/C last forever and I think everyone knows that these R/C Companies are watching. How do you think the get ideas and new stuff they steal from him like the Arrma Mega which he made first speed car then they released one?!? He’s the King 👑. Thanks Earl
Would the RC handle better at high speeds with the rear tire size all around on the rig? More stable and more tread on the road ? Just curious E Thank You for sharing.. 👍🏻💯%
Problem with wide tires on the front it will fallow all the groves in the road making it handle terrible I’ve noticed like a drag car skinny is better even on 4wd 👍👍
@@earlmoorhead5555 yeh that’s not going to work for speed bashing but not the end of the world for a one and done speed run. I’ve only seen the fan come on a couple of times speed running.
I honestly think the the tires look better that way in Formula 1 when the track is dirty or wet they put tires that have tread the same way to get off and away from car like a street bike tire??! I would try it. Thanks again. Dame Horizon make us pay more for motor mounts but they put a place for the largest ESC U Can BUY. ??? WtF 🤬
It’s a square it still will sit high up ? And the body doesn’t get any taller flipping it around but the motor wires will not reach that direction anyways
if you change the position of the esc with the wires to the front, the fan will be left behind there, as the body is higher, it should already work I don't know if I'm making myself understood??
there is a video on YT of * the arrma guys racing a f1 c* ar, and in that they listed out the parts for their build: Limitless = 1/4 mile @ 8.6 Sec and 150+ MPH Roller chassis - Spektrum DX5 Pro Tx - Spektrum SRS6000 Rx? - Castle Mamba XLX2 ESC _- Large Motor Mount ARA320743_ - TP Power Motor 4070-CM 2020KV - Quad motor fans - Spektrum S6250 Servo
@@earlmoorhead5555 that sir is a beautiful build. I've been working such crazy hours for past 6 months I haven't been able to keep up on all your fantastic builds. Thank you for all that you do for this hobby and sharing with us.
Good information 👍.. I have v1+v2.. haven't done anything on v2.. still in box.. don't want to rush on it, next spring build..
All right ! I got my Vendetta on the bench. Rainy here this weekend so I'm not going to get my shot at 100. Always like to watch while I work on my projects. Cheers Eman
Nice 👍
Loads of room under that ESC, why did they make it so high.
Wzup Mr.Moorehead!!! Good info to know about the v2. Especially the motor mounts.
Always fun to watch your builds, plenty of how to and why information to be learned in the context.
Great find on the esc🤘🏻. Thanks again Earl
I’m really enjoying this build it looks amazing can’t wait to see what it will do ✌🏼💚
Can't wait till you run it !
Too bad about the ESC mount. I'm sure you will work it out as you always do. 😎💯💯💯
That's a mean pinion ...... Really looking forward to seeing the speed of this.....wow
Yes low kv motor 😳👍
Very cool limitless 🤩🤩🤩
Thank you again I’m saving up for a used limitless or maybe V2 got kids, 2 boys, but I want that killer yellow and love the Formula 1 wheel staggered setup. I really think I might just send it to you but then it wheel be too fast. Seriously. lol 😂. Thank again Earl you’ll get it. U always do
Thanks
I ain’t spending $ that ain’t needed. I will drill that motor mount 😂
Man that sucks, the stock mount didn’t work. I’m almost sure Arrma will have the slider for the big block” for sale” asap! I’d love to see you drill out the stock slider because if that works, I’ll do it. I’m thinking maybe the Dual lock is too thick. The 3m double sided tape is thinner and may lower the esc enough. It holds better also in my opinion. She’s coming along nicely 👌🏾🤙🏽
Can't wait to see this ripping down the road! 💯
Nice colour choice, always good content 👍
Hey what’s up Earl remember you do have dull lock tape it is gonna raise up the ESC a little bit
Yes but even if it clears there would be no air above the fan to cool the esc 🤔 need at least a half inch
Just a thought but you are right no air flow
Try taking the hook and loop tape off and just use double sided tape may give you the room you need
I thought about that glueing it down but even if it clears the body there will be no air flow to cool it off as it would be tight on the body 👍
Arrma costing customers more my ney than necessary, why change the dam motor mount.
Nice one Earl, pointing out these things really shows the incompetence of these companies.
Thanks
Great video, can’t wait to see it make a speed run👊👊💯💯
That looked like fun. An your son gets mad when you put the dad smash on him. Lol. Good times with the family. I love rcing with my girls. Great video bro.
Another great video. 👍 oh BTW your tires are on backwards. Lol I'm playing, I know you already know. Just couldn't resist.
⚠️👀😜😜
Anyone know of a company making an aftermarket motor mount for the Vendetta? I noticed today I can't gear up any larger than the factory 26 with out blocking access to the screws in the motor mount.
Great video 👍🏻🍻
they basically wanted the spectrum stuff in it cause they did a sale on a spectrum 1250kv system when you purchased a v2
Yes they did but drop day video showing TP power and an xlx2 👀😳💯
@@earlmoorhead5555 well that's lame you think they adjusted the body mounts to make it fit properly
Alright number two. Top 10 is dedicated to true channel watcher club. Here I am once again.
Notification squad 💯💪👍
I think its the way you positioned the esc. From other videos. I've seen the esc placed differently without issues. Or at least they didn't say it was an issue. Idk
Hopefully the new video will end the doubts 👍already out 👍⚠️
Arrma should hire you to prove out their designs before they release them to the public. Obviously they hurried to get this out without doing a full build to test it. Still a great looking car, and it'll surely rrrrrip, but those little fitment details...
Trust me I said that many times Earl is a very mechanical inclined, electrical inclined, ect. His is the king of all R/C I think he may have all the R/C’s point is that if they hired he would honestly Have R/C last forever and I think everyone knows that these R/C Companies are watching. How do you think the get ideas and new stuff they steal from him like the Arrma Mega which he made first speed car then they released one?!? He’s the King 👑. Thanks Earl
Where did you get the wheels from and did you have to change the rear diffs gears to the felony gears due to offset, and bigger wheels in rear.
MOST UPGRADE COMPANIES MAKE, DOESN'T BENEFIT THE CONSUMER..
Would the RC handle better at high speeds with the rear tire size all around on the rig? More stable and more tread on the road ? Just curious E
Thank You for sharing..
👍🏻💯%
Problem with wide tires on the front it will fallow all the groves in the road making it handle terrible I’ve noticed like a drag car skinny is better even on 4wd 👍👍
I also think some think thinner double sided tape will drop the xlx2 a little.
Yes but not enough to get that fan moving are 🤔
@@earlmoorhead5555 yeh that’s not going to work for speed bashing but not the end of the world for a one and done speed run. I’ve only seen the fan come on a couple of times speed running.
On a 2000 kv motor and up geared for 150 mph ( castle doesn’t recommend anything above 1700 kv) on the xlx2 the fan kicks on mid run
I honestly think the the tires look better that way in Formula 1 when the track is dirty or wet they put tires that have tread the same way to get off and away from car like a street bike tire??! I would try it. Thanks again. Dame Horizon make us pay more for motor mounts but they put a place for the largest ESC U Can BUY. ??? WtF 🤬
try to put the esc with the part where the wires come out to the receiver box it's an idea
It’s a square it still will sit high up ? And the body doesn’t get any taller flipping it around but the motor wires will not reach that direction anyways
if you change the position of the esc with the wires to the front, the fan will be left behind there, as the body is higher, it should already work I don't know if I'm making myself understood??
there is a video on YT of * the arrma guys racing a f1 c* ar, and in that they listed out the parts for their build:
Limitless = 1/4 mile @ 8.6 Sec and 150+ MPH
Roller chassis
- Spektrum DX5 Pro Tx
- Spektrum SRS6000 Rx?
- Castle Mamba XLX2 ESC
_- Large Motor Mount ARA320743_
- TP Power Motor 4070-CM 2020KV
- Quad motor fans
- Spektrum S6250 Servo
And where did they talk about the xlx2 fan hitting the body or needed to buy an additional motor plat ?
Man that is a big ESC. Do you have a video using the Mamba Monster X 8S, 33.6v ESC w/ 1520-1650KV Sensored Motor? On to the next video. Thanks again.
Yes in the limitless 👍
You should just leave the tires as long as possible, do a little trolling. 😆
I am lmao 😂
Mr. Details
Awesome build Earl, what is the truck on the desk? that is a sweet rig.
Thunder truck I did a build series on it 109 mph 2028 with an xlx2 esc clean rc for sure delta plastic body 👍
@@earlmoorhead5555 that sir is a beautiful build. I've been working such crazy hours for past 6 months I haven't been able to keep up on all your fantastic builds. Thank you for all that you do for this hobby and sharing with us.
Pretty sure that tray is stolen from the v1 infraction . Also I've been spoiled by PPS mounts I won't use anything else
Infraction v1 and limitless v1 the same and are shorter than this V2 mount 🤔
Cut the box and mount the xlx2 to the chassis
Yes
👍👊💪💯
Hi Earl. Quick question, who's or where did you get the handle for your mip speed drivers from?
My loca hobby shop high desert hobby
Newer motor plates are ready to order on Horizon web.
Haha people worried about the wheels 🛞
All Right First 👍🔥🤪😎
Notification squad 👑💯💪👌
Very cool Banana 🍌
hehe now u r just toying with my/our ocd, 5 minutes to rotate those wheels. oh nvmd, @3:33 I realize u r just a stoner like me