Mercedes Vito, manual service light reset

Поделиться
HTML-код
  • Опубликовано: 19 дек 2024

Комментарии • 11

  • @PeterRichmond-xx7xz
    @PeterRichmond-xx7xz 3 месяца назад +1

    Worked for me Peter. Thanks for posting

  • @larkehoe6716
    @larkehoe6716 Год назад +2

    another handy tip, thanks peter.. i notice with some of these cars/vans that even after a service reset on diag machine, they need to be done in car aswell...

    • @kennedysgarage3281
      @kennedysgarage3281  Год назад

      Yes Lar, this is a grumpy old service light & scantool doesn’t do it so I’m recording it nearly for my own benefit 😤😂😂😂

  • @patrickjordan7670
    @patrickjordan7670 Год назад +1

    What was the outcome of the Mercedes e220 I was currieous to know how you fixed it I had a problem with a e220 myself a sam module problem I got it fixed it was covered in mildue from moisture and the car not been used only 67 k on it from new a polish lad from a breakers yard that I use fixed it just opened it up and cleaned it I had no joy from Mercedes dealers they just said I needed a new sam module and I have to bring it in to be fitted and coaded to the car just currieous to know how you finished up with that Mercedes with the bad can module

    • @kennedysgarage3281
      @kennedysgarage3281  Год назад +1

      Hi Patrick, I actually didn’t remember that I said I’d do a part 3. What I had done in part 2 was the fixing of the car, I fitted the radar sensor & the adapting done with the Autel worked out perfectly. All messages & fault gone except for the airbag issue, which I didn’t do as of yet but I will try to get part 3 recovered this week 😉👍👍👍

  • @danmitch5085
    @danmitch5085 2 месяца назад

    Worked! Thank you!

  • @rorycleary7364
    @rorycleary7364 Год назад +2

    u can't beat veto the best vans😂

  • @antodenn381
    @antodenn381 Год назад +1

    I have a strange question to ask 1.8 tdci Ford s max timing tensioner the pin is supposed to be in the centre of the two lines. I’ve tried two new ones and I cannot get it to lineup. I’ve looked on RUclips it says too have it at 3 o’clock that is not working 🥲

    • @kennedysgarage3281
      @kennedysgarage3281  Год назад

      I wonder could you have the wrong timing belt kit ??
      Also I can remember that the tensioner only turns one way, it has a little arrow on the front of it I believe 🤔🤔
      Other than that record a video & send it to me