#45 Drywall (Fermacell) and hemp fiber insulation on the interior walls! Renovating in Italy
HTML-код
- Опубликовано: 3 окт 2024
- LASGOO 3D Laser 3x360° 🔥
🇫🇷 amzn.to/41N3ycG
10% OFF Code: TMSHX6SK
🇮🇹 amzn.to/3LDLnjP
10% OFF Code: DUN239TB
We bought this stone house in Italy during the pandemic in 2020. The house was a ruin and we saved everything we could, unfortunately that meant only four stone and clay walls 😊 The back wall, against the terrain, was close to collapse; the roof beams were eaten and basically reduced to dust; the inside separation walls were easily taken down and the whole project turned into a heavy renovation/rebuild.
Follow our journey as we turn this old stone house into a beautiful home 😊.
If you liked the video, please hit the thumb up and consider subscribing 👍
📷 Find us on instagram: / _mavi_atelier_
🌎 Find us on facebook: / maviarchitects
🤝 Support our project: paypal.me/maviatelier
Your four footed manager is still doing a great job!
Non c’è bisogno di andare in palestra dopo una giornata come questa.
It’s best to hang the wall sheeting horizontal against the vertical studs to prevent racking and increase stability, so it was a lucky mistake I say. My husband is a bricklayer/plasterer by trade. 👏💖Michelle 🇦🇺
Just found your channel and subscribed. Watching all your videos over the weekend to catch up.
If you have offcuts of plasterboard, glue them to the back of the plasterboard inside the wall, it increases the sound insulation
Bravissimi, il valore storico del recupero di queste antiche case è grandissimo. Complimenti.
Now it is easy to imagine the furniture arriving.
Yes finally!
Job well done. Bravo 👏👏👏👏👏
yes in the US standard drywall is 48" x 96" so walls are assembled with studes spaced at 16" and the sheets are assembled vertically as is--no cutting required. Also the mistake is compounded because now there is no horizontal stud to brace the drywall along the upper edge.
"Little by little - step by step!" ---Looks good! Like my grandpa used to say: "Building a house? A real Home? Yeah, but only once in a lifetime!" Have a nice day ----
There is a special tool called a drywall drill with a sleeve that goes over the screws and has a slipping chuck which prevents the screws from sinking too deep into the drywall or fermacell surfaces. It demples them perfectly so your plaster will cover the screws perfectly.
Toujours la même joie de vous retrouver dans vos belles vidéos. Remarquable travail réalisé avec soin. Félicitations.
Very precise workmanship. Wall board and insulation are superior to common equivalents in America, although 100 lbs per sheet adds difficulty.
Come mai una coibentazione così massiccia x gli interni? Siete veramente bravi
Per l'isolamento acoustico e per aiutare a guardare il calore nelle stanze in inverno!
Absolument, sinon le bruit traversera les murs et en plus tous les bruits de plomberie 😂
Es ist fast schon ein Ritual mir jedes Wochenende Ihre beeindruckenden Fortschritte anzusehen während ich faul auf dem Sofa liege!! 😅 Beim Verlegen der Fermacell Platten fühle ich mit Ihnen weil ich einen ganzen Speicher mit Schrägwänden über Kopf verlegt habe. Aber ihr beiden kriegt das wunderbar hin. Natürlich nur mit Unterstützung des tierischen Bauherrns😂 Ich liebe IHN 😍
Nice wooden job and also gysum board job.
I love watching your dog. HE must be exhausted by the end of the day.
Things seem to go smoother this video and got a lot accomplished. It is shaping up to be really nice. Those panels are super thick and more beneficial for your home. Thanks for sharing.
Moving fast now
Looks so good! You’re both becoming such great carpenters! Thanks for sharing such a wonderful project😊
Your project is shaping up gracefully 👏
Hello, I greet you, it looks so beautiful and it gives me pleasure to watch you every time 👍 wish you all good health and strength
I love this phase of renovation projects when it shifts from „oh man, this is a construction site“ to „ok this is starting to look like a home“.
And good choice with the fermacell, I hate these cardboard walls.
Are there any news on the windows and Frontdoor?
Thanks for the video and good luck with your project!
Whoever is choosing the music is a star.
I love the music THANK"S
Bravo pour ce choix de matériaux et pour cette très belle avancée à bientôt.👍👏👏😀🐕🏡
Should have used a Gyprock Acrylic Stud Adhesive in addition to screws for added strength! But great progress!
Bravo, super travail en couple et en parfaite harmonie. Vous avez bien maitrisé ces cloisons malgré le poid de ces plaques. On commence a comprendre le plan de la maison. Et cette maison avec son cadre extérieur va vous donnez de nombreuses années de bonheur. Continuez de travailler de la sorte, vous serez fier de votre ouvrage. A bientôt.
Following you guys for a while, amazing transfromation! Since I recently did some work with Fermacell and insulation myself, a few tips:
First: Cut and break the Fermacell. You cannot use the glue on a broken side, but with a little thinking you don't need to.
Second: removing the glue: use a scraping-knife!
Third: Try to use scissors when adjusting insulation.
Keep up the good work en keep enjoying it!
The plants you put in are looking great😊
45kg a panel 😮🤯 that’s some heavy work! 💪
You don't realize how heavy it is until you try lifting a panel 😂
Hola, mucho ánimo desde España😊
WoW!!!!! so cool. wall up. Job well done......Your amazing your
dreams can come true. Cuze you made it happen. Blessings Cali Girl.
Impresionante proyecto!!!!…algo para toda una vida…ya veo niños,tíos, abuelos
Thanks for the video and good luck
Que lindo ver como progresa la casita, me intriga saber como van a unir los techos, pero tendre q esperar para ver ❤saludos
Guys! could use Inside and outside TROWELS for inside & outside corners of walls while plastering. This will give asthetic look.
It's all starting to take shape now and it's superb. Your vision and dedication to all aspects of the renovation have been inspirational. The glimpse we had of the terraced gardens is also exciting, I can't wait to see the progress. I also appreciate the professional video output. From Liverpool UK.
Complimenti state facendo un buon lavoro. Se i Vs video durassero qualche ora credo che non mi stancherei di guardarli. Buon lavoro
Grazie mille!
Guys! Could have used water spray (hand held bottle) to spray water for smoothening the plaster which would have given fine finish to the wall besides less strain to arms.
Nice job. Good results !!! 👍👍👍Hope to see the next video soon !
Forse il materiale e' diverso ma qui (USA) installano i pennelli orizzontalmente. L’installazione del cartongesso orizzontale riduce il metraggio lineare delle giunture di circa il 25%. Mantenere il metraggio delle giunture al minimo si tradurrà in meno strisce tra un pannello e l’altro e un lavoro finito dall'aspetto migliore. Installare orizzontalmente consente inoltre al muro a secco di scorrere sull'inquadratura in modo che le borchie ad arco creino meno problemi. E' diverso per i vostri pannelli?
Beleza muito bom 👍👍😎😅😅
It's so satisfying to watch how the walls become in a room. Good job guys🎉
Dat bouwen van de wanden ging lekker snel.Goed gewerkt hoor.
investing in a drywall screwdriver can really pay off...
You guys are moving fast! Great work!
Thank you so much guys! 🥰
I find your channel interesting and informative. Thank you from ...Kettle Falls, Washington USA
Hard work, good isolation, love to see building up. Go for it! Looks so good already! love this video. Va bene, good luck from the Netherlands.
👏🏼👏🏼👏🏼…loving watching you guys restoring your home
Lindo video, siempre aprecio como describen bien las características de los materiales, gracias. Hasta pronto 👋👏👌🙏
bravo!
Молодці гарна робота 👍 так тримати
In my experience any unsupported join between boards will crack eventually. None of your uprights seem to have "noggins" or horizontal timber to allow for fixing the unsupported edges.
We followed the recommandations given by Fermacell, it should be alright!
I really enjoyed watching this. Well done 😊
Guten Tag…
Bonjour…
Bonjorno…
You doin a very nice job 👍
My husband hung drywall professionally for 30+ yrs & now our son does as well; with that & living under constant construction I've learned the following:
a) you don't hang it vertically on walls, you hang it horizontally (so what you thought was an error is actually correct)
b) you don't glue the sheets together because you'll be taping over all the screws & joints with tape & joint compound.
Thank you! the Fermacell panels need to be glued together though, there is no taping 😉
Yo Lolo, you ain't in Kansas anymore. This is Italy, not 'Merica. And that ain't drywall. You don't mud & tape the seams with Fermacell panels. And as for drywall, you can hang it any damn way you please--including at a 45 degree angle--but there is just less waste if it's hung horizontally. Doesn't have a damn thing to do with strength.
Purée il a de bons pneus ton utilitaire... Et t'arrives à t'en sortir avec le fermacell quand la petite n'est pas là 😁 Beau boulot la team, les volumes prennent forme !
On était à la limite de la charge autorisée en effet! Tout seul c'est beaucoup plus galère oui! Mais pas impossible 😉
gran bel lavoro finalmente comincia a esse una casa con le sue stanze!!!! aspetto con impazienza la prossima puntata!!!
Grazie mille! 🤗
Que preciosidad de casa toda de piedra ,estáis trabajando mucho pero el resultado será increíble y las vistas maravillosas un sitio espectacular disfrutarlo y con muchas ganas de ir viendo lo que hacéis día a día. Un abrazo desde ESPAÑA,❤
Gracias 🤗
Superbe avancée. Votre compagnon à 4 pattes me fait bien rire en passant l air de rien et ayant l’air de vérifier si tout lui convient !❤.Bon courage pour la suite !
Most drywall in North America is installed horizontally. With taller and taller interior spaces, it means less waste.
Les différentes pièces de la maison commencent à se dessiner ! Tellement hâte de voir le résultat :)
Hermoso el video!!! Esa restauracion de la cabaña le esta quedando espetacular!!! Saludos desde Argentina chicos
Muchas gracias!
Holaa chicos los felicito por el trabajo que están haciendo va quedar un sueño su casa saludos desde Argentina 🇦🇷🇦🇷🇦🇷🤗🤗🤗🤗
Muchas gracias!! 🤗
Excellent ,magnifique merci pour ces belles vidéos
Great progress!! BTW you meant insulate NOT isolate!!!- free grammar tip!!
Thank you for sharing, gracie mille
Wirklich interessantes Video. In so einem alten Gebäude ist es eine echte Herausforderung, genau, rechtwinklig, senkrecht usw. eine Ergänzung machen. Hut ab! Ihr zwei seid großartig. Ich freue mich auf die mögliche Fortsetzung.
Such panels are usually place horizontally in Australia
Mi avete fatto appassionare a questo lavoro immane... ma da non esperto avrei prima messo l'intonaco su tutte le pareti e dopo fatto i tramezzi, magari è una mia idea sbagliata, buon lavoro!!!
Thank you for the video. 👍
Bravi ragazzi, avanti cosi
Grazie!!
Travail remarquable dans cette ancienne maison puis la vue est imprenable
We need more 😢 im from 🇸🇦 ilike what you do 😍
Felicidades por su trabajo y dedicación.espero con ansias el próximo video desde Torreón Coahuila México.me encanta su trabajo,
Super beau travail j'ai hâte de voir la suite.🙂
Pour la découpe des plaques côté mur peut être utiliser la technique de la rondelle percée et du crayon pour coller au mieux au relief du mur...???
Très bonne idée, à certain endroit l'enduit des murs couvrira les jonctions avec le fermacell donc on ne s'y est pas attardé
Great work.
Great Job.
Very interesting video. But I think between each Fermacell plate there have to be a small gap. This was the case at my house.
The gap should be a millimeter only from what we saw on the technical document of the product
Depends on whether you use glue or mud. With mud you leave a gap of 5-8mm, with glue you don't.
Cada dia mais linda parabéns, poderiam colocar mais vídeos um grande abraço pra vcs aq do Brasil
Très beau travail la famille ateliermavi... Cloisonnements et placages parfaits !
Je vois que votre chien est comme vous : calme olympien ! Juste une question : les huisseries arrivent quand ?
Bon courage pour la suite que j'attends avec impatience
Merci beaucoup! Encore deux mois d'attente pour les fenêtres!
super travail ! perso j'utilise un vieux ciseau à bois pour enlever la colle N'oubliez pas d'utiliser l'enduit pour joint de Fermacell car sinon la colle va réaparaitre .... Je n'aurai pas placé les plaques contre les murs extérieur qui n'ont pas encore été isolé (risque de condensation) Pour le reste rien à dire vous les placez mieux que certains proffessionels ;-)
Merci beaucoup, supers conseils! On a laissé un peu de place pour passer de l'enduit chaux chanvre entre les plaques et le mur 🙂 Des conseils pour obtenir une finition légérement texturée (type enduit chaux/sable) sur le Fermacell?
@@ateliermavi j'aurai dis chaux sable .... Moi j'aime les enduis à l'argile coloré c'est tres facile à faire mais vous devez avant mettre un betoncontak sur la plaque de Fermacell pour l'accroche Au moins cher le faire au platre et couleur Je suis impatient de voir vos futurs sols
Les plaque de platres se coupent au cuter, profondeur 5 mm environ.
Tu fais une incision sur toute la longueur de ta coupe, tu laisse dépasser de 1 ou 2 cm des plaques du dessous et tu appuies d'un coup sec.
Plaster plates are cut with a cutter depth 5 mm. .
You make an incision along the entire length of your cut, you leave 1 or 2 cm of the plates below and you press down sharply.
Avec les plaques de Fermacell qui sont beaucoup plus dures que des plaques de platres normales, c'est un peu plus compliqué. La découpe à la scie circulaire est plus nette, bien que plus poussiéreuse.
Its interesting to see different building techniques from around the world. May I ask, why do you insulate the interior walls? Is it to reduce noise between rooms? Where I live I have very rarely seen in an interior wall insulated. Thank you.
We insulated the rooms mostly for acoustic reasons ☺️
belessimo ... Grazie
Looking good ...
👍😊
Cuando usen lana de vidrio también deben usar barbijo porque estás respirando material sin darte cuenta.
Claro, pero esto es lana de cañamo y no es nocivo, no hay problemas a usarlo sin respirador!
@@ateliermavi claro acá en argentina se usa más la lana de vidrio por eso supuse que era esa, gracias por aclararlo👏🥰
Top job. In what way you will treat the fermacell surfaces.
We are not sure yet ☺️
I'm a little concerned about the screws on the fermacell. I've been installing plasterboard for decades. I'm not familiar with fermacell, and maybe it's different, but you arent supposed to penetrate the paper on plasterboard with the screws. The screw should just sit slightly less than flush with the paper. If it penetrates the paper it loses its grip strength and cannot hold the board to the wood. Thete are special driver attachments that perfectly sit the screws. They are called dimplers. Your screws look like theyve all penetrated the paper. There shouldn't be any paper sticking up where you've put screws in.
Stranamente il mio telefono ha deciso di cambiare il mio spellcheck a Italiano senza che me ne sono accorto. Mi scusi se ci siano dei errori nel mio post.
Some of them are little too deep indeed, but most are 1 or 2mm from being flush to the boards ☺️
@@ateliermavi Sfortunatamente, questa penetrazione di 1 o 2 mm non è neppure adeguato. Devono essere molto vicino al livello del superficie, solo una piccola frazione sotto . Sé penetrarono il superficie non riescono a tenere i panelli al legno. Appena rotto il superficie si deve rifarlo. Sé no, dopo qualche tempo i panelli cominceranno a muoversi e delle crepe appariranno. L'adesivo è utile senz'altro, ma non è abbastanza forte di se stesso. Questo detto forse il fermacell è diverso dal plasterboard normale. Non lo so.
@@ateliermavi Nice work! Im always exited to see the new episode. I would also suggest to get the dimpler. Cost nothing, but huge difference. Much faster, because the dimpler makes sure you do not get too deep, so you can screw much faster, and then at the end much less work is needed when covering the nut holes with the filling. Keep up the good work!
This stuff isn't like the drywall/gypsum plasterboard used in the US and other countries. The same rules don't apply.
@@idontthinkso666 That's useful to know. Thanks.
Para las puertas de hace lo que llaman “la bandera” cortan la placa en forma de L para que no se note y salte la junta del panel cuando se cierra la puerta 14:23
👍
👍
Gran bei progressi, ma a quando le finestre?
Ancore due mesi a aspettare!
Did you use a depth attachment on your impact drill to control how deep the fermacell screws penetrate?
Most of the time
@@ateliermavi does it work well? I tried without and sometimes I go too deep and break the edge of the board.
@@jc-fy1wl Actually I am not very happy with the drill bit I got, the screw heads are still not perfectly inside the panel and I had to come back without the special bit to finish the job! If you are being careful, you can do it without
have a question..... why are you insulating the interior walls? why not just the exterior walls on the inside?
For a few reasons: first to insulate acoustically, then to be able to keep the warmth in winter (at night for instance) 🤗
@@ateliermavi ah... thank you
Why do you insulate walls inside the house? I mean walls that are not towards the exterior stone walls.
Mostly for acoustic reasons!
@@ateliermavi Aha... that's very important in some contexts.
When will y’all have the next video?
Tomorrow hopefully!
Oh boy I can’t wait