TURNING A $7 HAMMER INTO A $200 HAMMER!!!
HTML-код
- Опубликовано: 8 мар 2020
- Install Raid for Free ✅ IOS: clik.cc/bghH8 ✅ ANDROID: clik.cc/Na9TE ✅ PC: clik.cc/U1UUA and get a special starter pack 💥 Available only for the next 30 days!
Thank you to Raid for Sponsoring this!
We wrote a blog post on hammer styles and weights you can check out here if you want to learn more! alecsteeleshop.com/blogs/blac...
OUR PRODUCTS: alecsteeleco.com/
INSTAGRAM: / alecsteele
ALECSTEELECO RUclips: bit.ly/alecsteelecoYT
ALECSTEELECO INSTAGRAM: / alecsteeleco
LEARN BLACKSMITHING ONLINE: beginblacksmithing.com/
PATREON: / alecsteele
We use Paragon Ovens for our heat treating! They are one of our Sponsors and create some of the most durable kilns and ovens available in the World. Be sure to learn more here:
bit.ly/paragonandsteele
Instagrams:
Alec: @alecsteele
Will: @will_stelter
Jamie (editor): @jamie.popple
Isaiah (Videographer): @isaiaharnoldfilm
My name is Alec Steele and I am a 22 year old blacksmith from England, now living in Montana in the USA! With a great team of hardworking folks, we upload videos showcasing the projects we get up to here at the workshop. Lots of sparks, lots of making, lots of fantastic-ness. Great to have you here following along!
/ alecsteele
INSTAGRAM @alecsteele
FACEBOOK PAGE / alecsteeleblacksmith
SNAPCHAT @ALEC-STEELE
MUSIC:
Epidemic Sound - goo.gl/iThmfx
- signing up at this link supports the show!
MUSIC - goo.gl/iThmfx signing up at this link supports the show! 
Развлечения
![Oscar Maydon x Junior H - Volver Al Futuro [Official Video]](http://i.ytimg.com/vi/sa52xabMSB8/mqdefault.jpg)
This might be a good series
: Blacksmith on a budget*
Tool mods and re-purposing
Question: what would you do with a Harbor Freight Cross Pein Hammer?
I would absolutely love that!
@@Tastfullight make better tools
There are a few channels where guys take apart Harbor Freight power tools and compare them to expensive tools you'd get at Home Depot or Lowes. Surprisingly, a few of Harbor Freights top shelf tools are better than the more expensive Home Depot stuff. Harbor Freight is perfect for the Blacksmith on a budget!
AvE is great
Making a $7 hammer into a $200 hammer
Just add a $193 dollar handle
🤣😂🤣
I Just liked a comment even though it was not funny
@@bige3092 i just liked your comment even though it was not funny
And get rid of the obnoxious twit on the camera!
@@Jack-ge1st who?
I've been forging with a re-ground Harbor Freight hammer for several years. Nice to have your stamp of approval though! :)
I ground a couple into angle piens and they are great. I did them with a grinder.
Nicr
I love your tuna John
@@footrot17 hahaha!
Me too for about 3 years it was one of the 4pounders
Alec, I would like to see a video on the different types of steel and their uses. Maybe even a shopping expedition to a steel mill or wherever the steel may be purchased.
Was I the only one who saw the first leaf and was really impressed by the more abstract leaf pipping added just through the use of the hammer, only to later hear that they are "unsightly marks"
Ye
Lol... I still like the first leaf
I thought they were done on purpose, nay......WITH purpose
Thought he textured it that way on purpose. I liked it as well
agree, first looked more interesting
Step one: buy two hammers
step 2: use one to improve the other
step 3: switch
repeat 2 and 3 until Hephaestus cries tears of joy.
😂
one who can make heavens weep from your craft makes the world just one mark better than when you started. that is how all should strive to be.
Pretty sure that is how we made the first lathes.
Can you do a “how to make a starter forge” tutorial for people that would want to get into it? Or is there one out there somewhere?
Check out essential craftsmans channel for a no weld forge. It's a good starter forge
Numerous. The King of Random has a smelter which could easily be used as a forge, and a number of people have made them out of coffee cans and the like.
Tons of those videos out there
@@kingnull2697 this smelter is terrible as a Forge. If someone want simple forge, Google "jabod forge". For air supply you can use a air mattress hand pump and 3/4 steel pipe. It works perfectly with charcoal, and I was able to forge a knife with this setup :D
He litterally has that video. Look into the playlists of his videos. Seriously, only you can find and click it.
Can we just stop for a minute and appreciate the editing
Yes, Jamie does an incredible job and make all the videos on Alec’s channel fun!
My question is: when are we going to get some armor? I mean, I love a nice sword as much as anyone, and I'll gladly watch you make all manner of weapon. But a helmet or a shield project would: (1) provide a nice challenge that I think you'd enjoy. (2) let you practice and expand upon your other skills, like leatherworking or metal casting. And (3) it would just be really cool and interesting. I look forward to getting my hammer. Cheers.
Alec has noted before Armor is wholly different from making weapons. I doubt you will see him make armor any time soon.
Well, what about a scabbard?
@@psabt10081 Isn't that the point? Armor is completely different. It's outside his wheelhouse, outside his comfort zone, which means he has a lot of opportunities to learn and get creative.
@@billwithers7457 It requires different tooling and a lot more time than any sword.
Ditto to this, it makes sense that different skills, techniques and tools are used but that shouldn't be a limiting factor but an opportunity for challenge, as we've seen before Alec can pick up new blacksmithing methods really well, armour would be some very interesting content.
Now you've converted a "cheaper" hammer to a decent forging hammer, and made a soup can forge in the past, can you also show us how the make/convert something into a good enough starter anvil?
U don't have to "make" one. Just pick up a hefty block of steel.
Rails. They are surprisingly good for small stuff. For bigger things it won't do though
Railroad track works pretty well. You could also pick up a cheap oxy acetylene torch for about $130-$350 and then shape out a horn and a Pritchett or hardy hole.
Agreeed
I own a small railroad track anvil, but I think it would make a good addition to a "how to start on a budget" serie.
Your hammers are worthy of the hands of a Dwarf from Moria of old.
😂
Thanks for the incentive to finally do something with a hammer I bought at a yard sale.
25 yrs ago.
For 3$.
Never cleaned it.
Just started working with it as a mechanic. Sometimes a 3-1/2 lb persuader is the perfect tool for the job.
Anyway, it is now my smithing hammer.
Your little video was perfect timing.
Cheers
Dang Alec. This isn’t how you run a business. You’re supposed to say there’s no way a harbor freight hammer could ever be as nice as the hammers I sell. Cmon man!!
"Jimmy Buttcheeks: CFO"
A C Creations has a nice ring lol
By the time you do all the work to the HF hammer it will cost more then one of his.
@@jeromeslack4697 In time perhaps but not dollars. Most handy people will have the basic tools already and modifying this hammer may be the starting point many may need.
@@jeromeslack4697
I don't think so. First make sure to buy one that has a tight handle. They are mounted by hand so results vary greatly. Then grinding and polishing the faces won't take over an hour. Flattening the handle wont take long either.
This guy has an English and American accent at the same time
Those are called Canadians
Well he was born and raised in the UK but is currently living in Montana.
@@Ianflaer Montana? That's close enough to Canada.
@@gringoamigo8146 yeah it's pretty close🤣
He is from England
It is now June 2022-I have only just found your Channel. and I am a retired metalworker (an Artificer in the Royal Navy) and it is an absolute delight to see someone such as yourself, showing a technical as well as a passionate skill for a trade that is short of students.- well done young man- you have demonstrated a knowledge that is sadly lacking in some RUclipsrs who profess to be skilled, and it is evident from their videos that they are not. Keep up the good work.
Are you going to be making some "back to basics" videos? Those are the ones that got me into forging, and it's really fun to see how great a result you can achieve without all the fancy tools. Love Will's videos. More of that please.
Imagine if Raid Shadow Legends marketing guys were spending 1% of their budget into paying their dev and making an actual good game instead of pestering every single youtube viewer about it... One man can dream :)
people actually play that crap?
@@Gantzz321 no, only the youtubers who are contractually obligated to install it and play it while recording the sponsor spot.
You just launch the game and the only people online are youtubers.
I played it for a month it got boring an repetitive fast. Plus it is very pay to win
@@Gantzz321 yeah. It was the single most lucrative game last year. Pretty pathetic how easily manipulated mobile players are.
when i see ANYTHING that is constantly spammed in my face... i skip over and ignore it and will NEVER waste my time even downloading or looking at it... if it's as good as people think then word of mouth is the best advertising!
When Alec has a kid, will he start stories like “I use to climb a ladder to use the microwave!” ?
Hot of interest how would alec tell that do a dog (he's already a dad)
Funny you should say that, but back in the og shop the microwave used to be on a shelf so high he struggled to reach it. 😂😂😂
@@MichaelDreksler thats the point
RIP Chef Mike
i love how he says "I don't have a woodworking bandsaw. I'll have to grab one somewhere" when those things cost thousands of dollars
I picked up a bandsaw from Kijiji for $250. It requires a bit of cleaning and a bit of love to get it running, but it's an industrial quality frame. A new blade is about $25 for it, grease the bearings, re-finish the table and it'll be resawing in no time. There were cheaper options (under $150) for smaller jobs, but I wanted to be future-proofed, since I am a carpentry apprentice, so the woodworking is more my appeal.
Blacksmithing is still wicked cool though!
Anyway, I just wanted to drop that to encourage you if you were feeling the cost was prohibitive to entry. If you're willing to put a little work in to repair an older tool, you can get in for pretty cheap.
@@DominicDeegan7 yeah, if you can repair it yourself or haul it yourself, lots of stuff can be had for cheap
Started 2 years ago and I still am using hammers like the HF one, never knew HOW to modify them, good video so I subscribed! Hopefully my next blades will be better looking and I won't have to grind so much!
Nobody:
Me: Watches the entire 7 minute ad Forgetting what I clicked on
Lmao, I've done that before too.
Same lol
Alec: starts selling $200 hammers
Also Alec: makes a video showing why you don't need them...
It's important that people know the difference between luxury and necessity. You don't need a $200 hammer but it's going to feel nicer and if you're doing it all day every day you probably will get your money's worth. I'm a software developer and I've spent $300 on a keyboard but you can obviously get the job done on a 8 dollar keyboard. For software developers a lot of it is "how long will it last" if you have a keyboard that lasts your whole career and is programmable you can really get used to it and therefore go longer between typing errors. My current has replaceable switches and I keep extras.
@@ARVash How long will it last and how consistent will it be. Anyone doing a job will eventually recognize a well made tool designed for a job is always better than the cheap one that "gets it done". This is basically a video about how you could get started in blacksmithing but showing what you will inevitably long for.
@White Wild kid you ever wonder if this is why you don't have any friends?
@White Wild makes sense to me
Not stonks
those "unsightly" marks on the leaf you forged actually gave the leaf more realistic characteristics. the marks looked as if they were the "veins" of the leaf
Yeah not the best example haha
Its good to see Harry Potters brother finally step out of his brothers shadow.
Ooh a table saw! Prepare to see that first aid training come in handy.
Finger tips? We don't need no stinking finger tips!
handy being the keyword here.
@@SuicideNeil I am missing TWO fingertips on my left hand, thanks to a table saw. My index finger has one segment left on it and my middle finger has a bit less than that. Saws aren't to be trifled with!
**Alec Steele uploads** OMG PART 2,000 OF THE ZWEIHANDER - Alec: Nope.
so awesome.. to see you pushing "not about the tool, but the learning experience".. in so many "hobbies" or "jobs", people feel they need top of the line tools to learn or catchup to the professionals, when it shows, you can get to that point with everyday items... to an extent.. so awesome.
I've been "tuning up" hammers for awhile now. Most of them have some extensive rust pitting since it's so humid here. Thanks for posting this kinda content. It's nice to see the comments from other folks that are using the tools they have the way they want. Modifying tools is the absolute best way to know them and know what they can do for you. 🤙🏾🤙🏾🤙🏾
I actually love the “unsightly” leaf. I think the unintentional hammer marks gave it a lot of personality :)
Looks more realistic with veins
I think the biggest thing is the word unintentional. It’s one thing to do that on purpose but if you are trying to make it flat and it as those marks then you have a lot more work bc your hammer gave you some extra “character” to work with.
Grant Barber for this specific application it reminds me of a Bob Ross happy little accident.
I thought they were veins that he put in until he said differently
Question: because you can't "see" it on screen: How does forging feel and smell? How is it like for you, standing next to the fire and hammering on red hot metal?
You come in as a boy, and you exit as a man
It feels like working. Im working in a fabric making elbows for dredging ships.
To me working a hot piece of metal feels like I'm smacking on frozen play dough, or oil based clay that's been sat in the freezer for an hour... or at least all three move almost exactly the same way when struck for the most part.
Heat? Hmmm... That's a good one. I guess it smells a little bit like whatever fuel you're using, a little bit of super-heated rust, and something else I can't accurately describe... I guess it's one of those things that you have to experience for yourself?
If you're using charcoal/ coke it smells like that, a bit like a bbq but maybe a bit more sulphury. With a gas forge it's just a hot smell like an engine room.
The feel is just really satisfying, firm but pliable.
Get a charcoal grill going and fan/blow it as hot as you can.
Put in a piece of semi thin metal (a large untreated nail) and hit that with a hammer on a bigger piece of metal.
That is exactly how it feel, smell and is to forge.
I think the concepts he has shown in blacksmithing is applicable to lots of different applications elsewhere. We are a tool using species
By far one of my top favorite blacksmiths of the modern age.
alec: i want to show you that you don't need expensive tools
also Alec: look at all the new toys i've got.
No one in this video is named Alex.
You don't _need_ them. But if you have them, things get easier!
LiGhTMaGiCk haha I was thinking the same thing “who’s Alex”
Alex was a guest last year lol
After witnessing you improve that hammer, I felt this intense sensation of joy.
You managed to create a thing of beauty.
I know you're a fan of the hammer you typically use, but I would take that $7.00 hammer that you improved than I would the more expensive one you're accustomed too.
With many kudos to you. Keep doing what you're doing.
Question: How bad is Will's arthritis going to be in the next year after all the filing and hand sanding he does?
Does the Alec Steele co. offer corporal tunnel insurance for "sanding Willie"?????
@@ryork7923 Carpal tunnel sport. I has it from 40+ years of filing, sanding and beating on various metallic objects.
Oh and I would also like to preemptively throw my hat in the ring for any future rookie blacksmithing with the master videos. I am probably the greenest of green and would love to learn first hand from you.
Always fun watching welders, blacksmiths, fitters, etc play with wood.
Question: To paraphrase a wise old owl, “How many hammer blows does it take to make a steel Tootsie Roll Tootsie Pop?”
“Unsightly marks in the leaf”.. I thought those were put there on purpose..
MFTomp09 I think he was talking about the round marks in the center that were made by the edge but not meant to be the design he usually puts on the leaves
I liked how it looked. It looked like a more realistic leaf with veins
They definitely were, but don’t forget about a teaching purpose of this video)
I'll try to write in english: it's been a while since last time i saw a video of Alec and now that i'm back on this channel i'm realizing how much i missed him! The garage of my new house is waiting its setup for start forging again and Alec's tips and energy are always an amazing help for me...expecially the videos (like this one) where he makes budget friendly projects XD. Great Alec!
Your English is better than some Americans I know
Just bought one of those hammers from HF and discovered this video. Can't wait to modify it as you have. Thanks for the lesson!!
Can't wait until Raid dies.
Everytime i see Raid, i dislike.
Q1: Does using the pine tar on the handle create a sticky grip or does it dry like a wood finish?
Q1.5: Also does burning the handle help with blisters and splinters?
Burning the wood creates a waterproof coating on the wood. Yes, pine tar is sticky.
Wow, this is super helpful! Now I know my next project!
My question for you is how do you go about making things symmetrical? For the leaf, for example, how do you make sure each side looks roughly the same? And how do you fix it if it starts 'leaning' to one side?
Never seen anyone more inspiring in the engineering arena.
And so young and intelligent.
Very unique.
So much negativity in the actual occupation.
Question: How long do your large propane tanks last you between normal forging and forge welding?
“you can get and angle grinder for like 30 bucks"
*laughs in harbor freight
They just went on sale there for $9.99
Yeah, but a $30 one will last longer and do a better job overall
@@alexbaumgartner8416 but if you are just getting started.... and realize that the harbor freight special will wear out quicker... then the one from harbor freight can get you started
I hate harbor freight tools. I love buying used tools from auctions for dirt cheap
I see milwaulkee grinders sell for $5 all the time. I have 3 of them! Bought 2 and some sawzall for around $10 from one auction
Just stumbled across this channel. I've really been missing out. Looking forward to diving in much deeper.
so happy to see a video with you and only you ;-)
nice job on this hammer !
1:55 skips the raid shadow crap, welcome..
Raid Shadow Legends should commission something from you guys. That be cool to see being created.
or not, since RSL is a trashy, boring game.
Only if Alec adds pay to win mechanisms to whatever he makes. "You want to form more material? 5 hammer blows 4.99, 10 hammer blows 7.49, 20 14.99"
They did a ring for R:SL, didn’t they?
thank you for doing these kinds of videos. I love the normal ones, but, this is just so much more encouraging. thank you
Alec, you inspired me to look at my shop and tool set in a wholly new way... Love the energy and creativity, making the best of what you have, even if is from harbor freight!
(Reads title)
My brain: _Whosoever holds this hammer, if he be worthy, shall possess the power of Alec!_
hello there
Whomever and whomsoever are real words.
@@arbitrarystuff1229 in modern american english who has almost universally replaced whom as accepted form
@@Krupnekt So, not English then.
Question: Does the quality of the anvil have more of an impact on forging than the quality of the hammer?
I would say no. An anvil is really just a block of steel with a flat face. Horns are useful but really not necessary and the heel is only there for hardy tools. Having a hammer in the right weight with the right faces is going to help tremendously in creating quality forgings.
I don't know, but I suspect they're about equally important-at least in terms of how much metal you can move, and how quickly.
Essential Craftsman has a video about testing out a harbor freight anvil.
he said it tired him out more than his regular, antique anvil, partly because the work took longer than usual. he was using his regular hammer, and I believe he was doing a familiar task.
in physics terms, when you apply a force to the work on the anvil, the anvil has to apply an equal force in the opposite direction. imagine if your anvil is mounted on a spring, which springs back only after you lift the hammer-a lot of the force is wasted compressing the spring.
to some degree, a solid, heavy, well mounted anvil with a hardened face does that already: some of the force is changed into heat, and some is lost compressing whatever it's mounted on, &c., &c.
I'm not an engineer, so I can't calculate how much that is, but if the best possible anvil returns (for example) 99.9%, and a bowl of jello returns 0%, then:
- at what percentage do you start to feel the difference?
- at what percentage does it make a measurable difference in how long a job takes?
- at what percentage does work actually become impossible?
if EC's impression of the Harbor Freight anvil was accurate, it was returning enough less that he could feel a difference, and the work took noticeably longer to do.
To an extent yes, if your anvil isn't solid you can definitely tell, and you can also tell if it is tiny, but a solid rectangular steel bar of sufficient mass should make a decent anvil for general forging.
ThoperSought It definitely makes a difference but trying to forge with a 5lb hammer on a good anvil would tire you out much quicker than a 3lb hammer on a mild steel block. But yes a well made anvil with the right hammer would be most comfortable to forge with.
@@sterlinghamiltonracing6487
yeah, that makes sense.
I wonder:
if all you have (for example) is a big, mild steel ASO, and a harbor freight hammer, which is more important to upgrade first?
obv., assuming you modify the face of the hammer so it's not leaving unsightly hammer marks.
from this video, it seems like it's more important to upgrade the anvil, but I don't know.
I am just starting out and a friend of mine recommended your channel and I am blown away thank you
I thought you were going to re forge this hammer head to a different shape, but using the angle grinder works as well.
Well done Alex!
Im 18 years old and wanted to get into blacksmithing for such a long time now, but also not having the money for good equipment. This video has been such a help because ive been struggling to adjust my cheap Hammers so far. I would verry much like an iconic alec steele Hammer for my own, so my question is:
if i want to find some good quality metal to forge with for cheap, how can i distinguish useless scrap from something as for example high carbon and good hardened steel ? So that i can sellout my local junkyard ;D
grinding on the metal the sparks say a lot. i know that doesn't exactly help you, but the bigger brighter sparks are high carbon and the dimmer little sparks are not (knowledge alec has past on) as for looking at it to tell i haven't the foggiest
Go to a car scrap yard, and get leaf springs. High carbon, cheap and widely available
@@forgotin1 thnx for the tip :D ill try to notice something
@@logancryan7957 have tried that, but unforfunatly no leaf springs at the place where i go to
As already said, the easiest way is to grind test it. Watch how the sparks fly. Do they stay in a straight line, or do they split and fork out, split and fork out. There’s a bunch of videos on it. One other way pretty much requires that the high carbon steel is hardened already, but you can try skating a file. If it skates, it’s hardened. More than likely it’s high carbon, but it could just be case hardened. As far as trying to locate a large piece of high carbon steel, you’re best bet is industrial equipment. Look for things that must be tough. Axle shafts, hydraulic rams, pivot pins on backhoes or loaders, teeth or wear plates on excavation equipment, springs, etc. Anything that is going to take the brunt of the impact, abrasion, or stress will probably be a high carbon steel. They only put it where they need it. If you don’t need a 3-5lb large block, look at pickup truck leaf springs. One set of leaf springs could make a ton of blades or tools.
I'd like to see less sword making and more general blacksmithing, like hinges, door handles, storage racks, etc. Also some shop tips or shop organizing tips would be great!
That is a little boring for people people. No one goes into blacksmithing to make a hinge. They go into blacksmithing to make swords and weapons.
@@Woodshadow I make knives and there are tons of knife making channels. I'd like to get better at other things too. I haven't put much knife making content on my own channel since it feels saturated already.
I hope he gets a joiner so the planer and table saw can be at their best! Love your videos man!
Love this episode! Will be looking to try this out myself, because my hammer needs some serious help.
Question: How can you tell that the wood will hold up, even for the cheaper hammer?
Question: When are you going to have Joey Van Der Steeg back in the shop for a collaboration?
Them-First a word from our sponsor...
Me-ok let's s...
Them-.... Raid sh-
Me-NOPE, *skips*
Also I like that you work at a level that quickly relates to those who may not have the nicest stuff or the most experience!
This is the single most useful blacksmithing video out there.
Who else would show you that you don’t need to buy his amazing hammer? Alec, that’s who!
Question: would it be a bad idea to throw the Harbor Freight “hammer” in the forge to create a larger face?
Daniel Damrill. I’ve done that, not to nessecarily make a larger face but to forge it more into a rounding hammer so I don’t have to grind away material an waste money on grinding disks. You just have to redrift the eye to correct shape otherwise there is a high chance of the handle breaking on you. Heatreating these steels are a hit or miss so I don’t bother. Most of my hammers aren’t heat treated as you would want them to be softer than they anvil so if you miss hit and hit the anvil it will dent the hammer not the anvil.
@@LoganBiren I call it a hierarchy of hardness haha. Like using soft wood mallet to hit hard wood into place.
Even my titanium hammer has had its edges rounded over over time and its super hard.
Based on the youtube channels I've seen, and based on this tutorial by Alec above, you might have to replace the handle after doing that, since the forge would likely make charcoal out of the handle. You might could get away with removing the handle, and reinstalling it after forging the different head profile (might even have a narrower eye for the handle to go through afterwards).
I did this recently to an HF 2 lb sledge. Sure, you could reforge the head, but that would likely be overkill. It's only $7 though, so do whatever you want want to with it.
I followed your video and finally modified my hf hammer today. It is so.awesome thank you for this video!
I just came back to this and rewatched after 3 years. Man Alec, your stuff has just turned into youtube classics for me. And I have to say having "grown up"(relative term as Im currently 30yo) watching your content and learning all my blacksmith knowledge and potential skills from you; ive gotta say man, i feel like Ive studdied at the foot of the master smith of our times. Ive been all over youtube, and in my humble opinion noone else has come close to the amount of skill, technique, attention to detail, and overall quality work that youve shown over the 5 or so years since I started watching you.
Alec I really hope you read this, you are and have been an inspiration to me. Ive been thru some dark times recently, and my passion to create got me thru those times and has finally driven me to try and start my own blacksmithing career after wanting to for so long.
I have a decent steel anvil that ive dressed and made ready. Im very close to assembling my first forge and starting. Thankyou Alec for all the things youve taught me over the years. I really hope that I get to meet you one day, as again, i regard you as one of the greatest smiths of our time.
I figure after watching all Alec Steele's videos here on RUclips everyone would have the answers to their own questions answered. 🤔
This was a very helpful video. I'm just starting out and made my first single burner forge and all I have is a 7 dollar hammer from the harbor freight (no joke literally just bought it yesterday). My question is how big of a Propain tank do you need to work with? Unfortunately, there are not many videos or forums out there that give you a clear answer. Thank you in advance!
Love you guys, Saw this channel for the first time 2 months ago and decided it will be an amazing quest to learn a new craft, instead of just sitting around all day doing computer work. Hope all of you have a lovely day.
Colin Carnevale for a small forge a normal one for grilling is fine but as you get a larger burner and forge that will be ran for longer amounts of time then I would go with the 50 pound tanks
Size of propane tank does not matter. It's just how often you feel like changing the tank.
I work with a standard barbecue tank, 3gals? With my single burner (venturi) it lasts quite a while. I forge maybe 4hrs at a time and it lasts at least 5 sessions? (guessing). I have a couple of tanks, when one is empty a quick swap, keep working, and later go fill the previous.
Thank you guys. You have been very helpful. I'm excited as all I've been using till now is a blow torch haha it's very crude.
I like to use a 100lb tank, but then half my forging year is in an otherwise unheated shop in the Canadian winter. 100lb tanks freeze up slower when it's properly cold out and that way I can get more forging done in a session.
I have modified some of the inexpensive brand tools also, including tongs as well as hammers and anvils. I notice that everyone has their on unique styles or way of doing things. What is your take on modifying/customizing tools to fit individual nuances?
Alec, greetings from across the pond! I love the content of your RUclips videos and to think that you are keeping the skill of blacksmith work in a live craft. I can tell you have a real passion for your career and may your ventures go from strength to strength. Beats sitting in a cubicle tapping away on a computer...well that is what I think!
Instructions unclear. Hammer now stuck in ass.
Question: what your favorite movie?
Nice
Me: Is everyone here for the giveaway hammer from Alec???
Alec Steele: That is a FANTASTIC question!!!!
Alec, that's a nice bit of info on the hammers there. If ever I get into forging then I will have to make sure my hammer looks more like the hammer you modified. Great video!
I just bought that same hammer and the hand was fit perfectly. I'm looking forward to modify the faces and test it out.
Question: When buying your first anvil, what “features” do you need to look for, what is necessary ?
A flat face, my first anvil was an eBay lump of steel in the relative shape of an anvil and I've made projects on it that I'm proud of. I would say get a good anvil if you can though and in retrospect I'd get something under 100lbs as it was a pain to move my nearly 350lbs when the floor under it needed repairing
ProbablyAZombie my first anvil setup that I still use consists of a 9” long 2” thick and 5” wide block of 4140 bolted to a damn heavy stump I found that had just been cut down.
@@KimballPrecisionRifles if it works it works
take a look at the purgatory ironworks ASO [Anvil Shaped Objects] video, basically you could probably get something damn close enough to the real deal for free
“Imma do this as simply as possible for you guys”
Pulls out a Contractor Variety Table Saw
Glad to see you are safe and doing well, lad.
So, for the rounding hammer why the deep fullers behind the faces? Is it just for aesthetics or is there another purpose?
Thanks!
I'm not a blacksmith or a bladesmith, so I dont know, but in my mind it would serve as a way to help the user quickly recognize which side is which so that the metal doesn't lose any heat when the smith is going from the forge to the anvil.
Maybe the increased surface area to mass ratio helps the hammer stay cooler during forging.
Not my answer but I read elsewhere in thecomments a bigger strike area without increased weight.
Question: what are the main fundamentals to forging with a hammer and where can I find a career in blacksmithing, also thank you for the entertainment over the years
All around the U.S. Are local blacksmith clubs, and some members are professional blacksmiths. Check out the ABANA website for a smith or club near you.
I'm still waiting on an assassins creed Damascus hidden blade made with the mechanics and the decorative leather arm band. It been over 2 and a half years man. Come on. You could make such an epic one.
The main problem is licensing and the fact that such a blade is largely illegal in most places. The law frowns upon hidden, spring-loaded blades.
@@JacktheFireEater I didn't think that was the case for novelty items.
@@JacktheFireEater there in montana, you can pretty much do whatever you want out there.
Love your channel. I'm a nubee at 63 learned a lot from you. Thanks for posting 🔨
thank you for the video! I'm just getting in to bladesmithing and had a question about tempering my blades after the quench. is there a time/temperature formula that I can start with as a baseline to build off of? any info would be much appreciated
Question: I've been blacksmithing for a couple years now and I was thinking of trying to get into doing some damascus steel. Is there any pro-tips to keep in mind when making damascus?
"unlike some people, I am not going to point the flamethrower at you." - Alec Steele to Will Stelter
Loved this! Thank you for the great info!
I like the idea of recreating tools, could you possibly come up with a video on how to make the most used tongs on a budget? Keep up the great videos. Thanks
Question: when you first started blacksmithing what was the most valuable information you had learned where you started to really see yourself creating beautiful work?
Question: Can all that scale that comes off with forging ever be used for anything useful?
Exfoliating face scrub.
@@AstronomyWales Hahahahaha
Cygon. You can resmelt it into an iron or steel bloom since it is still iron (iron oxide). Chandler Dickinson has a video of him doing that with his scale and grinding dust. I myself have been saving as much scale as I can as I would like to try to smelt some iron and refine the bloom into some wrought iron. Although I am going to need to save a lot of the scale (I’d like 20 lbs or so) as most of it will probably be lost do to wastage when smelting.
We use floor sweepings and a few other things to make crucible steel sometimes. It’s a crazy labor intensive process that doesn’t always work but it’s fun
You can use it as a punch lube to stop your punch from welding into the piece
You have inspired me to take up the art and science of balcksmithing. I hope one day to have a fraction of the skill and knowledge that you have. Bravo sir..
Kudos Alec, I can actually stand to listen to the sponsor segments of your videos
It's almost like Alec is about helping us learn to blacksmith rather than just make money off us.
Question: What other tools can be upgraded by the everyman?
Also, idea for more episodes. Go through someone's tool shed/parts pile and make something cool from something they have that's been sitting around.
Justin Murray I like cleaning out my plumbers wrenches and polishing the screws.
Another fun project I I have done was polishing an MSR tent stake hammer and an old crow bar
Love this guy and everything he does. Makes me want to make a hammer!
Who doesn’t like nice things??? Most people aren’t going to jump right into backyard blacksmithing with a $200 hammer but they can still do it. Great video!!! Not to say that they wouldn’t wish they had one
Question: What is a great set up for a blacksmithing beginner ( what tools or furnace is needed)?
Question: Would it be possible to do a no forge challenge. Taking a metal and forging or repurposing it into something else without the use of a forge? Belt Sanders, hammers, other tools except for the one that is used the most in your shop.
just use a huge chunk and machine it with lathe/mill. Alec is a blacksmith. There are great youtube machinists out there eg clickspring
@@galacticravioli3217 i am still envious of the guy who made his own anvils (250 lb iirc)
I got the tools but no time
Hey Alec, i have a question, thanks to you i've been blacksmithing for 2 years now, and recently started on making blades, my first sword cracked during heat treatment though. I think its due to the edgethickness at the quench, can you give me insight in what the edgethickness should be for the quench? I quench in water, because i dont have access to large oil resevoirs!
Thanks ahead!
I want to get Into smithing, currently have a course booked about 2 hours from me.. my question, is can you do a vid every now and then like you used to do with some info for us newbies? I definitely enjoyed when you did the small keychain/trinket videos!