Note: Seems v40 is out and fixes the slow boot up and other things! Completely missed this release, it was kind of hidden in the Github releases. Updated the description, but you can find the latest release here: github.com/rg35xx-cfw/rg35xx-cfw.github.io/releases/latest
Was about to point out that boot time is way better, and also "sleep" mode works just fine, for me batocera works the best right now looks amazing and performs ok for my needs
@@nickentrosyou will have to flash the SD card, so yes, it erases it. The folder structure for roms is also different compared to stock. Things to backup are roms and save files.
Followed your guide on installing Batocera, the lastest update does make it better. I didn't understand the bios files in your instructions at first, but then you had that other video that explained it, making it a breeze. What led me down this route initially was the problems i was encountering with Anbernic's stock OS, while it was alright it seemed a bit flaky at times. The OS seemed to corrupt after use here and there, and I was in contstant need of reimaging. I may for kicks try muOS at some point, but for now Batocera is looking promising, even better now that it loads a little quicker. But anyway, thanks for the helpful guide!
@@Matheus-tl9ek sou ansioso só Man kkkkk, meu xxplus chega amh Mas eu tô mais puxado do lado do muos por conta dos ports, então se eu for mudar de os vou de muos
O meu está no ar vindo pra cá ainda...estou na dúvida de qual dos CFW vou colocar no meu quando chegar. To pensando no MuOS por ser mais simples, mas sei lá ainda hehe to no bonde dos ansiosos.
@@lucasrafael1395 kkkkk eu tô com dois cartões...coloquei o batocera em um, muito bom, rodando de boa os meus principais (GBA, SNES, PS1). To esperando lançar a v11 do muOs para instalar ele no outro cartão e testar.
I am new to all this. I did not know which system to go with, so I bought both RG35xx Plus and RG35xx H. I was able to swap the CFW from stock to V40 thanks to your video. Also, I was trying to find out the largest micro SD I am able to use on both RG35xx Plus and RG35xx H. So far I've been using a SanDisk Ultra 512GB. It works great. No problems yet.
I still don't get the pros about changing from stock ware. Stockware already has Hdmi, Bluetooth, Wifi and Sleep Mode function. Booting times are also better than Batocera. I am not trying to hate, I am just being curious about why I should change from Stockware.
same, i don't understand the urgency to change the stock but with batocera the psp runs worse than the stock system or that's what I have seen in reviews
I really really love using the emulation station frontend on batocera, but the boot times and the battery drain in sleep mode is too rough for a daily driver. I decided to run MUos, so quick to boot and the sleep mode works well also! We'll see how things develop in the future, I'd like to give batocera another shot.
I have Koriki on my 35XX H and despite the flaws it currently has, I really like it. v40 also has Dreamcast performance improved pretty drastically compared to when Koriki first dropped. On top of further needed updates, I hope the community cooks up more themes that are geared for the +/H...a good amount of the themes currently available look kinda small and if downscaled, looks pretty bad.
I noticed that ArkOS and JelOS has significant battery drain in sleep mode. I like the QoL features of GarlicOS/OnionOS. In this case, is MuOS is more like GarlicOS/OnionOS, or is it also like ArkOS/JelOS?
Ok, do you prefer to use a larger single microSD card, or getting a smaller microSD for the OS, then a 2nd microSD for rom storage? I'm preferring the latter in case I want to go between multiple devices, but clicking on multiple videos to see recommendations.
Actually, the version in this video is outdated… It’s now Batocera not lite as it is compiled in whole again in the previous update. The boot time have significantly improved since the latest 6/3 update from my personal experience.
@@kinghojuunder 25 seconds. I’m running 32gb + 512gb. Also made them both ext4 (not sure if this contributes to boot times, but theoretically is the faster option)
Thanks for this video, mate! I was looking for a CFW for my brand new RG355XPlus and it looks like muOS is gonna be the perfect fit for now. I was sticking with MinUI and although it's a very competent CFW, I kinda felt like it was missing some minor features and it looks like muOS is going to cover it.
One thing I noticed that sucks about Batocera Lite is it can’t remember multiple Networks. Have to connect at home and work each time with the password. Stock OS remembered each and automatically connected.
Anyone know how to make the ds emulator full screen for the batocera build? I believe it uses drastic as the emu but I can't get it to not show both screens
I have two questions... one is you said the stock os is lacking. What are the reasons you went with the customer firmware. What do you get that you don't have with stock? Second, I have branded 32 gig and 256 gig cards lying around. I would like to put the OS on the small one, and the roms on the large one. The images are for 64Gig cards, however they don't have 64 gig worth of data within then. How would I got about doing this? Cheers
i just ordered the H version and i’m very excited to get it. truthfully i’m probably just gonna be playing pokémon games on this thing, do you think that the Stock OS will be fine for that? also, is it possible to add rom hacks? i’m not super tech savy but i’d assume since it’s an emulator i would just take the rom file and put it in the matching system file? very informative video thank you
The only thing I care about is battery life for these different OS'es. I heard the battery on stock firmware is superior compared to cfw. I might do an extensive battery life test when my RG35XXSP arrives. Thanks for the video :)
Just installed muOS on my RG35XXH and it's really good. If ever you do another guide for muOS one I would like would be how to scrape the boxart on your card with Skrapper. muOS allows boxart but I'm a bit confused how to go about it🤔
Put them in the catalogue folder. There are different subfolders for box art,in game art and a small description of the game. But yeah i spoke with the devs and it's coming soon natively.
Basically what I’m hearing is, the stock is way better than either of the other ones you mentioned, one loads super slow, and the other one is just retroarch, but lacks Bluetooth, and hdmi out. Interesting
MuOS does not lack HDMI out, at least not in the latest version, bluetooth will eventually be fully supported through updates. MuOS is only getting better and better, it already has features like port master for example and v11 is shaping up to be incredible. Both these frontends are a lot better than stock and are consistently being updated and improved.
Hey I got a situation with my system and it relates to my Battery icon and I don't think that it was accurate. MOstly as I fully charged my system and left it to cool off before playing but it suddenly got down to around 80 to 90 percent. What was it that I did wrong or is it an inaccurate battery indicator?
You mentioned in your video that you'd consider this a PS1 and below system with battocera - where does that place Saturn emulation? Is that an option at all or should I be looking at a more expensive device?
It's a full kernel sleep, it won't save and shutdown like OnionOS does, but it sleeps in the same way. There's an option to boot right into a game on startup though and that's awesome.
I've been seeing some black lines tear on screen straightaway. They are there sometimes when I boot the console and some other times not but when they appear, the gaming experience is ruined, I've updated the stock OS to the latest version straightaway without backing up the already installed one, then I tried the one between the latest and the already installed one, with both ones I've been experiencing these tears. I wonder if installing a custom firmware could fix this. If anybody has any insight about this I am all ears.
where can i find normal common bios files for the Betocera? do most bios files work with most front ends? i have betocera loaded just dont have the consoles i want
Hi Joey, when I plug my SD card back into my windows PC, my shared folder is completely empty. I do not see the list of files such as bios and roms like how they are listed in your video. I am able to boot up batocera on my anbernic plus device but I don't see any additional games (for SNES) even after copy/pasting my (legally owned) SNES roms into the shared folder. thoughts?
Could you point me in the right direction on how to create the bootable sd card using Linux or Android, I just ordered an rg35xx h and want to be prepared for it when it arrives, don't have a windows pc just an android tablet and a laptop with Zorin Os, so not really sure what's the best way to create a batocera boot SD card using Zorin.
I'm watching this device very closely as I'd like to upgrade from my original 35xx for the summer. Do these make the device more viable Joey, or will we be talking about the miyoo mini Horizontal by June? 😅
I don't think anyone will like this answer, but it does make them for viable, although not viable enough for me over other options. I still grab my MM+ for a small vertical and for horizontal, there's a million options. Anbernic really did these devices no favors by releasing them in the state they did.
know im a bit late to the party but can anyone give any input on the portability of the 35xx h vs the pocket flip?? ive been thinking about replacing my miyoo mini v3 with something like the 35xx h, but i already own a pocket flip and from what i can tell the footprint and weight of the pocket flip is very similar to the xx h but with the 5'' screen basically slapped on the front. is the size/weight of the pocket flip really significant over the xx h?
"just bad" isnt really an argument for not using stock. I still haven't seen a single person comment what "bad" actual means in this context. And immediately starting with "the draw back to this OS is slow/no output/bluetooth...." isn't really fair on stock.
Stock OS on Anbernic devices get a lot of bad press, and I don't mean that to say it's undeserving or anything but I agree with you about the "bad" labeling in the sense that I think "barebones" is probably a more accurate descriptor. You don't get the Fancy cover art, you don't get easily accessible system options, and they often lack search capability (though the H has this in the stock OS). Personally I prefer to use stock because that's what you get out of the box and it helps me to better evaluate what buyers get. But for others in my household, the stockOS is often not visually appealing, hard to navigate, or just not intuitive, so I guess that's what some people would describe as "bad".
I agree. I just got an rg35xx h a few weeks ago and the stock OS is totally fine. The new OS’s offer prettier visuals, and I really wanted to install it, but I learned they usually have bugs that won’t play certain games or systems. That’s just not worth the effort of switching over the OS.
I was using it for a few weeks and it corrupted the SD card it was one twice I had to let the device completely die just to successfully flash Kokiro which is surprisingly smooth.
My SD card is not showing up in file explorer after using Rufus with MuOS. I can see the drive in Minitool partition wizard but not in file explorer. Anyone know how to fix this?
Sorry man, there´s some pieces missing in your review... From where do you get the 'Bios' folder? I just downloaded the ISO file following your step by step... Both Bios folders (PC and SD card) are empty here
BIOS files are never included in any custom firmware, you have to provide them yourself. This was a high level overview of both firmwares, not in depth.
Hey joey i am new in ur channel I already subscribed, I got my handheld 3G35xx plus and I want to know whats the best thing I should do please I bought my own micro sd card, now how can I add roms? do u have a video? and do I need more than 1 micro sd card? and also should I play on the preinstalled OS or change to these CFW... and lastly do I need to remove the pre installed rooms or just adding my own rooms to my new sd card is enough? sorry I'm very new to this world thanks a lot for ur help
Hey, sorry I don't have a video. You can format the SD card as FAT32 then insert it into slot 2 (slot 1 should have your OS card already) and it'll auto create the folders to add roms for you. I would suggest replacing the roms yes.
so i have a 64 gb sd card and a 128SD GB CARD but the 64sd i have the STOCK OS. on the 2nd sd I only have my own rooms what should I do can I use the 128gb to install Muos/batocera and rooms? all in 1? or should I re flash the sd1 card (install muos/batocera remove stock os) and on 2nd sd card just my rom games? MUos has a new update and i want to try it but its gonna be my first time doing this thanks bro
What i did is, i download batocera in extra sd card 32gb, i keep 64gb for stock os with roms. If i like the batocera, that is the time i will flash my 64gb and transfer all roms into it.
Hey Joey, I installed Batocera lite a few weeks ago but it doesn't display my battery percentage. Is this a bug or should I do a fresh install, or perhaps it's a setting I need to turn on? If this was already answered in the video just lmk.
Can you please explain how to use Dreamcast and psp on the rg35xx plus as I cannot figure out how to switch between analog and dpad and cannot find a clear answer - if this OS can’t I’ll have to stick to the stock a bit longer :(
🛑 If when starting and the loading screen stays at around 95% and doesn't go beyond that, it's probably because you're using the second card, turn it off, remove it and start again. I was killing myself trying several times and I believe that was the problem, hugs!
Thanks for the easy vid, very much appreciated. my SD got corrupted trying to put a DC rom on the next day, when i try to reflash the SD i just see a 4gb usb (its a 128gb samsung microsd until its flashed) and no share folder. rufus will show its 12gb but in windows devices screreeen its 4gb - any ideas?
@@JoeysRetroHandhelds did that but no joy, after a lot of trial and error (and googling) i got it working, sort of - had to go through the ip address of the anbernic in file explorer to see the share folder. can transfer across via wifi so all good so far (in hope). thanks for getting back, much appreciated!
on the dreamcast front, I actually recommend people play Legacy of Kain on dreamcast instead of PS1 on these devices. The ps1 version runs like absolute ass at 100% speed anyway. The dreamcast version is typically 60fps all the way through.
Until I play can PSP, Dreamcast, DS or N64 without big issues (or installation annoyances) on any other CFW I will keep using stock OS. The games on those systems are the reason I got a Plus. I think is better to stick to the original XX with Garlic if you're just gonna play the same systems and want a better OS experience.
That's a power issue. I wouldn't consider this device for PSP, DC or N64 (and stated in my reviews as well). There likely won't be any CFW that will make those possible with a good percentage of their catalogues as playable.
@@JoeysRetroHandhelds but many games are perfectly playable (if you don't mind things like aspect ratio on PSP). My honest question is, what's the point of upgrading to plus if you don't get to use that little extra power?
The last line is the exact point I usually make in a lot of my videos with the same power as this. There really isn't one. You'd want to get a device that does those perfectly (Retroid 2S) otherwise stick with a device that does up to PS1 (35XX, MM+ etc.) These devices that sit in the middle (35XX+/H/RK3566's) never made much sense to me nowadays, especially since they utilize frameskip and other hacks to get to those "playable" stages. But people like them! Just not for me and my recommendations personally.
@@JoeysRetroHandhelds yeah, that's a valid point. Although, it is great to be able to play some DC on the go, for example, on such a pocketable device.
N64 ,ps is just fine... dc needs frame skip and is OK... psp is meh... playable but not great.... I honestly haven't found a n64 game with lag except bond
I’m going to say that MU looks worse than the stock imo. List menus are so boring. Perhaps it works faster but I really don’t care much about that. I have a 556 and made ES-DE as my start up app. It looks great. When I get my H I’m putting Batocera.
Stock does not have wifi firmware updates and Pokemon can save on any firmware. If yours isn't saving, it's because you're using the stock roms, you should replace them.
Anyone have an issue when you shutdown batocara it blacks out the screen but the device stays warm on the battery so I know it’s still on and 8hours later it’s stone dead tried on 2 different rg35xx plus and doesn’t have this problem with stock os. 128gb Samsung sd card
Note: Seems v40 is out and fixes the slow boot up and other things! Completely missed this release, it was kind of hidden in the Github releases. Updated the description, but you can find the latest release here: github.com/rg35xx-cfw/rg35xx-cfw.github.io/releases/latest
Was about to point out that boot time is way better, and also "sleep" mode works just fine, for me batocera works the best right now looks amazing and performs ok for my needs
Do you have to format the SD card to update? If you flash the new firmware I imagine that will erase all the roms and saves and such right?
Would be great if the WiFi worked on it
@@nickentrosyou will have to flash the SD card, so yes, it erases it. The folder structure for roms is also different compared to stock. Things to backup are roms and save files.
I'm getting excellent N64, Dreamcast and PSP performance on batocera v40. Fast boot up times.
I like muOS on my RG35XX H. Thanks for the video man, really useful and nice.
Followed your guide on installing Batocera, the lastest update does make it better. I didn't understand the bios files in your instructions at first, but then you had that other video that explained it, making it a breeze. What led me down this route initially was the problems i was encountering with Anbernic's stock OS, while it was alright it seemed a bit flaky at times. The OS seemed to corrupt after use here and there, and I was in contstant need of reimaging. I may for kicks try muOS at some point, but for now Batocera is looking promising, even better now that it loads a little quicker. But anyway, thanks for the helpful guide!
Greetings from Brazil, your review's insane, more one sub!!!
Fala, amigo! Tá usando a v40 do batocera?
@@Matheus-tl9ek sou ansioso só Man kkkkk, meu xxplus chega amh
Mas eu tô mais puxado do lado do muos por conta dos ports, então se eu for mudar de os vou de muos
@@MaxLevy83 kkkkkk eu tbm, o meu liberou entrega pra SP ontem, logo chega
O meu está no ar vindo pra cá ainda...estou na dúvida de qual dos CFW vou colocar no meu quando chegar. To pensando no MuOS por ser mais simples, mas sei lá ainda hehe to no bonde dos ansiosos.
@@lucasrafael1395 kkkkk eu tô com dois cartões...coloquei o batocera em um, muito bom, rodando de boa os meus principais (GBA, SNES, PS1). To esperando lançar a v11 do muOs para instalar ele no outro cartão e testar.
I am new to all this. I did not know which system to go with, so I bought both RG35xx Plus and RG35xx H. I was able to swap the CFW from stock to V40 thanks to your video. Also, I was trying to find out the largest micro SD I am able to use on both RG35xx Plus and RG35xx H. So far I've been using a SanDisk Ultra 512GB. It works great. No problems yet.
This is awesome! I just may get myself an RG35XX Plus at some point.
V40 batocera has lots of improvements
I plan on trying Batocera Lite on the 35XX Plus I bought from you on the discord!
Great video, love to see some youtubers installing CFW on the rg35xx H
muOS is awesome!
@JoeysRetroHandhelds which os has a media player?
I still don't get the pros about changing from stock ware. Stockware already has Hdmi, Bluetooth, Wifi and Sleep Mode function. Booting times are also better than Batocera. I am not trying to hate, I am just being curious about why I should change from Stockware.
same, i don't understand the urgency to change the stock but with batocera the psp runs worse than the stock system or that's what I have seen in reviews
lol the psp stock runs so good the anbernic rg pretty much one
@@jilfd2912
Can you fast forward on stock?
@@s34mu5 sure u can
@@s34mu5 some what
I really really love using the emulation station frontend on batocera, but the boot times and the battery drain in sleep mode is too rough for a daily driver. I decided to run MUos, so quick to boot and the sleep mode works well also!
We'll see how things develop in the future, I'd like to give batocera another shot.
Good to see some custom options for these
Definitely!
I have Koriki on my 35XX H and despite the flaws it currently has, I really like it. v40 also has Dreamcast performance improved pretty drastically compared to when Koriki first dropped.
On top of further needed updates, I hope the community cooks up more themes that are geared for the +/H...a good amount of the themes currently available look kinda small and if downscaled, looks pretty bad.
I think MuOs is short for Mustard OS - keeping in line with the food theme.
Great Video!! I wanted to give MuOS a try on my H but could not figure it out thanks a ton!
Glad I could help!
I noticed that ArkOS and JelOS has significant battery drain in sleep mode. I like the QoL features of GarlicOS/OnionOS. In this case, is MuOS is more like GarlicOS/OnionOS, or is it also like ArkOS/JelOS?
im currently using the modded stock os. its pretty great so far. though i havent had much use for the actual handheld coz life's pretty busy atm
Thank you for sharing your knowledge in this video. Very good!
Glad it was helpful!
Ok, do you prefer to use a larger single microSD card, or getting a smaller microSD for the OS, then a 2nd microSD for rom storage? I'm preferring the latter in case I want to go between multiple devices, but clicking on multiple videos to see recommendations.
Actually, the version in this video is outdated…
It’s now Batocera not lite as it is compiled in whole again in the previous update.
The boot time have significantly improved since the latest 6/3 update from my personal experience.
Oh fish sticks. This is why I hate doing cfw videos lol they update so damn quickly.
What's the boot time looking like now?
@@kinghojuunder 25 seconds. I’m running 32gb + 512gb. Also made them both ext4 (not sure if this contributes to boot times, but theoretically is the faster option)
Thanks for this video, mate! I was looking for a CFW for my brand new RG355XPlus and it looks like muOS is gonna be the perfect fit for now. I was sticking with MinUI and although it's a very competent CFW, I kinda felt like it was missing some minor features and it looks like muOS is going to cover it.
Glad I could help!
One thing I noticed that sucks about Batocera Lite is it can’t remember multiple Networks. Have to connect at home and work each time with the password. Stock OS remembered each and automatically connected.
Anyone know how to make the ds emulator full screen for the batocera build? I believe it uses drastic as the emu but I can't get it to not show both screens
I have two questions... one is you said the stock os is lacking. What are the reasons you went with the customer firmware. What do you get that you don't have with stock? Second, I have branded 32 gig and 256 gig cards lying around. I would like to put the OS on the small one, and the roms on the large one. The images are for 64Gig cards, however they don't have 64 gig worth of data within then. How would I got about doing this? Cheers
Which OS is better in terms of perfomance on N64,PSP & dreamcast?
Love the video!
Thank you!!
i just ordered the H version and i’m very excited to get it.
truthfully i’m probably just gonna be playing pokémon games on this thing, do you think that the Stock OS will be fine for that?
also, is it possible to add rom hacks? i’m not super tech savy but i’d assume since it’s an emulator i would just take the rom file and put it in the matching system file?
very informative video thank you
Yep! Here's some info: joeysretrohandhelds.com/guides/starter-guides/how-to-patch-a-rom-for-rom-hacks/
The only thing I care about is battery life for these different OS'es. I heard the battery on stock firmware is superior compared to cfw. I might do an extensive battery life test when my RG35XXSP arrives. Thanks for the video :)
Why do you need to copy over the BIOS folder into the Shared folder if Batocera already comes preloaded with all the emulators?
Just installed muOS on my RG35XXH and it's really good. If ever you do another guide for muOS one I would like would be how to scrape the boxart on your card with Skrapper. muOS allows boxart but I'm a bit confused how to go about it🤔
I would wait a bit longer, native scraping is coming at some point! That's what I'm doing.
@@JoeysRetroHandhelds Good to know. Won't bother then.
Put them in the catalogue folder. There are different subfolders for box art,in game art and a small description of the game. But yeah i spoke with the devs and it's coming soon natively.
Does Batocera Lite have Daphne?
Basically what I’m hearing is, the stock is way better than either of the other ones you mentioned, one loads super slow, and the other one is just retroarch, but lacks Bluetooth, and hdmi out. Interesting
Or just tells you how bad stock is that we gravitate to these instead :)
MuOS does not lack HDMI out, at least not in the latest version, bluetooth will eventually be fully supported through updates. MuOS is only getting better and better, it already has features like port master for example and v11 is shaping up to be incredible. Both these frontends are a lot better than stock and are consistently being updated and improved.
Joey is on fire. 🔥
Hey I got a situation with my system and it relates to my Battery icon and I don't think that it was accurate. MOstly as I fully charged my system and left it to cool off before playing but it suddenly got down to around 80 to 90 percent. What was it that I did wrong or is it an inaccurate battery indicator?
I don’t have an option to extract the file (I’m not even sure what that does) please help?
just finished the rufus part and installed batocera on the SD card now the RG35xx wont turn on....any idea why?
Which RG35XX, Plus or H?
You mentioned in your video that you'd consider this a PS1 and below system with battocera - where does that place Saturn emulation? Is that an option at all or should I be looking at a more expensive device?
This can't play Saturn properly, no.
Anyone tested and compared battery consumption on stock vs batocera? There’s a reason why the stock os is Anberni’s default os
For some reason my shared file isn’t popping up anyone know why that may be?
Hi there, can you help when I download batocera it seems to download as a pdf and not as you show on your video demo? Downloaded rufus fine. Thanks J.
How is the sleep functionality in MuOS? Does it work like in Onion/Garlic OS?
It's a full kernel sleep, it won't save and shutdown like OnionOS does, but it sleeps in the same way.
There's an option to boot right into a game on startup though and that's awesome.
will this work with a 2 card setup?
do we need to extract our Rom files for add games on Batocera Lite ?
I've been seeing some black lines tear on screen straightaway. They are there sometimes when I boot the console and some other times not but when they appear, the gaming experience is ruined, I've updated the stock OS to the latest version straightaway without backing up the already installed one, then I tried the one between the latest and the already installed one, with both ones I've been experiencing these tears.
I wonder if installing a custom firmware could fix this. If anybody has any insight about this I am all ears.
What are bios files? I use mu is for the rgxx35h. Got it working but never bothered with bios files, I’m not sure what these are
Question, for muOS if our stock card was corrupted and the brand new card we install muOS on how would I get those BIOS files?
ruclips.net/video/cdxS6N0N6Oo/видео.html
@@JoeysRetroHandhelds thankyou!!
I just got one and the things confusing to me not sure how to download the roms 😅
where can i find normal common bios files for the Betocera? do most bios files work with most front ends? i have betocera loaded just dont have the consoles i want
out of interest does your muos reset the volume to very low every time you turn it on?
I put muos
I can't figure out which buttons to use to quit the game
Will I need an SD card reader? Or is it possible to use the sd slot that comes with my computer.
Hi Joey, when I plug my SD card back into my windows PC, my shared folder is completely empty. I do not see the list of files such as bios and roms like how they are listed in your video. I am able to boot up batocera on my anbernic plus device but I don't see any additional games (for SNES) even after copy/pasting my (legally owned) SNES roms into the shared folder. thoughts?
As of my experience, i put a drive volume in sd card using disk management, and it works, might will help.
Could you point me in the right direction on how to create the bootable sd card using Linux or Android, I just ordered an rg35xx h and want to be prepared for it when it arrives, don't have a windows pc just an android tablet and a laptop with Zorin Os, so not really sure what's the best way to create a batocera boot SD card using Zorin.
How to use automatic fastforward on gmae boy advance
I have Batocera set up yet still watching how to set it up.
Can you install Batocera on 35xxh with portmaster? I want to play stardew valley
Do i only need one sd card or two cause i didn't understand
I'm watching this device very closely as I'd like to upgrade from my original 35xx for the summer.
Do these make the device more viable Joey, or will we be talking about the miyoo mini Horizontal by June? 😅
I don't think anyone will like this answer, but it does make them for viable, although not viable enough for me over other options. I still grab my MM+ for a small vertical and for horizontal, there's a million options. Anbernic really did these devices no favors by releasing them in the state they did.
know im a bit late to the party but can anyone give any input on the portability of the 35xx h vs the pocket flip??
ive been thinking about replacing my miyoo mini v3 with something like the 35xx h, but i already own a pocket flip and from what i can tell the footprint and weight of the pocket flip is very similar to the xx h but with the 5'' screen basically slapped on the front. is the size/weight of the pocket flip really significant over the xx h?
Have a question, if i download a new update for rg35xxh, will my previous games work or i have to move around again????
"just bad" isnt really an argument for not using stock. I still haven't seen a single person comment what "bad" actual means in this context. And immediately starting with "the draw back to this OS is slow/no output/bluetooth...." isn't really fair on stock.
Stock OS on Anbernic devices get a lot of bad press, and I don't mean that to say it's undeserving or anything but I agree with you about the "bad" labeling in the sense that I think "barebones" is probably a more accurate descriptor. You don't get the Fancy cover art, you don't get easily accessible system options, and they often lack search capability (though the H has this in the stock OS).
Personally I prefer to use stock because that's what you get out of the box and it helps me to better evaluate what buyers get. But for others in my household, the stockOS is often not visually appealing, hard to navigate, or just not intuitive, so I guess that's what some people would describe as "bad".
I agree. I just got an rg35xx h a few weeks ago and the stock OS is totally fine. The new OS’s offer prettier visuals, and I really wanted to install it, but I learned they usually have bugs that won’t play certain games or systems. That’s just not worth the effort of switching over the OS.
I was using it for a few weeks and it corrupted the SD card it was one twice
I had to let the device completely die just to successfully flash Kokiro which is surprisingly smooth.
@@clocloclo90 I think that's a problem with the SD card itself and not the OS. The cheap ones that come with the device have notorious failure rates.
@@jffrsnxI fixed that micro sd and Ive been using Kokiri on it for a month now with no issues. What can I say 🤷♂️
My SD card is not showing up in file explorer after using Rufus with MuOS. I can see the drive in Minitool partition wizard but not in file explorer. Anyone know how to fix this?
Assign a drive letter.
Wifi doesn't work on batacera so no box art on the 35xxh for me anyway
Tryed many times here and the only folders Batocera installed in the SD card with the rom is a 'boot' and a 'tools' folders
Assign a drive letter to the other partition.
@@JoeysRetroHandhelds just downloaded the V39 version and it worked normally
Sorry man, there´s some pieces missing in your review...
From where do you get the 'Bios' folder? I just downloaded the ISO file following your step by step...
Both Bios folders (PC and SD card) are empty here
BIOS files are never included in any custom firmware, you have to provide them yourself. This was a high level overview of both firmwares, not in depth.
Can you utilize dual as card method ?
Hey joey i am new in ur channel I already subscribed, I got my handheld 3G35xx plus and I want to know whats the best thing I should do please
I bought my own micro sd card, now how can I add roms? do u have a video?
and do I need more than 1 micro sd card? and also should I play on the preinstalled OS or change to these CFW...
and lastly do I need to remove the pre installed rooms or just adding my own rooms to my new sd card is enough? sorry I'm very new to this world
thanks a lot for ur help
Hey, sorry I don't have a video. You can format the SD card as FAT32 then insert it into slot 2 (slot 1 should have your OS card already) and it'll auto create the folders to add roms for you. I would suggest replacing the roms yes.
so i have a 64 gb sd card and a 128SD GB CARD
but the 64sd i have the STOCK OS. on the 2nd sd I only have my own rooms
what should I do
can I use the 128gb to install Muos/batocera and rooms? all in 1?
or should I re flash the sd1 card (install muos/batocera remove stock os)
and on 2nd sd card just my rom games?
MUos has a new update and i want to try it but its gonna be my first time doing this
thanks bro
What i did is, i download batocera in extra sd card 32gb, i keep 64gb for stock os with roms. If i like the batocera, that is the time i will flash my 64gb and transfer all roms into it.
What is the game played at 4:30? thanks
Adventure Island
Hey Joey, I installed Batocera lite a few weeks ago but it doesn't display my battery percentage. Is this a bug or should I do a fresh install, or perhaps it's a setting I need to turn on?
If this was already answered in the video just lmk.
I'm actually not sure, I see a fix for something battery related in January, you could try updating and see if it fixes it or try their Discord.
@@JoeysRetroHandhelds thanks brother, I'll give this a shot after work
Where i can find and download the games in it?
Do either of these OS's have quick resume when shutting down and turning on like you see on garlic/Onion OS?
muOS has a form of it - you can select an option in settings to boot right into the previous game on startup.
I am not seeing the share partition, so what do I need to do to install BIOS files and such?
Windows didn't assign the drive letter then, you'll have to assign it yourself to that partition.
@@JoeysRetroHandhelds Thanks it's good now. Also, everything boots up but it said the "flash failed." Does that matter if everything boots up ok?
Hi brother, does the wireless phone work on this system?
I like muOS boot time, but that's about all I like about it. I prefer the fancy schmancy graphics Batocera gives me.
Can you please explain how to use Dreamcast and psp on the rg35xx plus as I cannot figure out how to switch between analog and dpad and cannot find a clear answer - if this OS can’t I’ll have to stick to the stock a bit longer :(
It’s a hardware issue with the dpad not being able to be registered as a analog stick
Retroarch options >options >settings input > change analogue to digital
So we need 2 card on rg35xx plus ? No one card version ?
One is enough with Batocera. MuOS I didn't try
@@pomade34 MuOS also works with a single SD card
🛑 If when starting and the loading screen stays at around 95% and doesn't go beyond that, it's probably because you're using the second card, turn it off, remove it and start again. I was killing myself trying several times and I believe that was the problem, hugs!
Thanks for the easy vid, very much appreciated. my SD got corrupted trying to put a DC rom on the next day, when i try to reflash the SD i just see a 4gb usb (its a 128gb samsung microsd until its flashed) and no share folder. rufus will show its 12gb but in windows devices screreeen its 4gb - any ideas?
Might not be understanding properly, but sounds like the partition isn't showing? Try windows disk management and assigning a drive letter.
@@JoeysRetroHandhelds did that but no joy, after a lot of trial and error (and googling) i got it working, sort of - had to go through the ip address of the anbernic in file explorer to see the share folder. can transfer across via wifi so all good so far (in hope). thanks for getting back, much appreciated!
on the dreamcast front, I actually recommend people play Legacy of Kain on dreamcast instead of PS1 on these devices. The ps1 version runs like absolute ass at 100% speed anyway. The dreamcast version is typically 60fps all the way through.
Could u also Ppease do a setup video for RP2s..
You can use my Android setup guide, Odin 2 setup guide or Retroid Pocket 4 Pro setup guide.
All will work the same for the 2S.
Thanks will check it out
muOS: 🥱😴
Batocera: 😎❤️
Is the batocera still this slow to boot?
No, it's about half.
has anyone played Stardew Valley in the Portmaster option of the MUos?
Stardew doesn't work currently.
....My RG35XX H experience went from just ok to terrible After Plugging It Into HDMI....SAME with 3 different rgb30 powkiddy handhelds...
Stock still the best
Until I play can PSP, Dreamcast, DS or N64 without big issues (or installation annoyances) on any other CFW I will keep using stock OS. The games on those systems are the reason I got a Plus. I think is better to stick to the original XX with Garlic if you're just gonna play the same systems and want a better OS experience.
That's a power issue. I wouldn't consider this device for PSP, DC or N64 (and stated in my reviews as well).
There likely won't be any CFW that will make those possible with a good percentage of their catalogues as playable.
@@JoeysRetroHandhelds but many games are perfectly playable (if you don't mind things like aspect ratio on PSP). My honest question is, what's the point of upgrading to plus if you don't get to use that little extra power?
The last line is the exact point I usually make in a lot of my videos with the same power as this.
There really isn't one. You'd want to get a device that does those perfectly (Retroid 2S) otherwise stick with a device that does up to PS1 (35XX, MM+ etc.)
These devices that sit in the middle (35XX+/H/RK3566's) never made much sense to me nowadays, especially since they utilize frameskip and other hacks to get to those "playable" stages.
But people like them! Just not for me and my recommendations personally.
@@JoeysRetroHandhelds yeah, that's a valid point. Although, it is great to be able to play some DC on the go, for example, on such a pocketable device.
Question, will this work on the RG350?
Batocera turned my 128gb SD into a 4gb time to just deal with the standard os
I heard it is good enough for N64 and Dreamcast, and even PSP it is good for 50% of games.
I personally wouldn't agree with that.
N64 ,ps is just fine... dc needs frame skip and is OK... psp is meh... playable but not great.... I honestly haven't found a n64 game with lag except bond
I think the RG405V had better shit when it was on stock android
❤
Without garlic,jelos(rocknix),arkos,amberelec anbernic linux device not worth your time or money
I’m going to say that MU looks worse than the stock imo. List menus are so boring. Perhaps it works faster but I really don’t care much about that. I have a 556 and made ES-DE as my start up app. It looks great. When I get my H I’m putting Batocera.
the Batocera v40 boot is much faster
Both are shit really shit. Stick with the stock
Just wait for stock soft update. I prefer stock for save game in pokemon for example and wifi firmware update.
Stock does not have wifi firmware updates and Pokemon can save on any firmware. If yours isn't saving, it's because you're using the stock roms, you should replace them.
Anyone have an issue when you shutdown batocara it blacks out the screen but the device stays warm on the battery so I know it’s still on and 8hours later it’s stone dead tried on 2 different rg35xx plus and doesn’t have this problem with stock os. 128gb Samsung sd card