Before I purchased my last HP laptop, a person from HP headquarters ensured me, the problem me and many others were having regarding this hinge issue was fixed and this is no longer an issue. So I bought the one that I have now wouldn't you know it shortly after my extended warranty runs out it happens again. Nice fix job HP!
My laptop has the exact same problem, only that the hinge attachment to the base of the laptop was solid. So I just pulled apart the old and new hinges at their pivots and replaced just the screen assembly part of them, with a new back cover as the attaching points on the old one were shot.. This saved me from the trouble of pulling the base apart. As for the cause of the damage, it wasn't loose screws, as they were pretty tight when I removed them and I had no wobble. It was the plastic mounting points on the back cover that gave way.. Thank you for the video, it was an invaluable guide!
I'm surprised at the poor quality of HP laptops these days. I just repaired a 17-Y where the hinges and nuts were broken off much like you have here. In the end, I ordered a new back and hinge set to do the repair at a cost of $100 for parts alone. The notebook is made too cheap and the hinge tightness is too high. Seems this is far too common a problem.
I was given a laptop identical to that one, and I now regret not watching a video like this one prior to taking it apart. I didn't know that the keyboard had to come out first. I removed the bezel around it first, and in the process, severed the cable for the track pad, as well as ripping the power switch off of its ribbon cable, which led me to ask why HP designed it this way, rather than having the switch on the motherboard itself, in a spot where when the bezel was mounted, the power button would line up with the actual switch. I also noticed that they put the memory on the underside of the board, so in order to upgrade it, you have to remove the motherboard and flip it over to get at it. I'm going to attempt to fix the power switch, but not the trackpad, since I plan to use a mouse with it. Another thing that stuck me as odd was that it seems to lack Bluetooth, even though it was built in 2016. My 2010 HP Elitebook has Bluetooth, but this one, as well as my 2013 HP 2000 Notebook seem to lack that feature.
I also reinforcd the hinge sides with a piece of wire coat hanger & J-B Weld. I also used J-B weld to strenghten the hinge mount suppots on the lid; mine broke loose due to over tightened hinges.
God damn those HP 15r laltops have crappy build quality. I had the exact same issue with hinges. Gave it to local repair shop insfead of spending fortune on authorized HP repair and the repair guy messed the display up such that i cant control brightness on my screen anymore
Great video...I am the owner of a similar model, HP 15 r007tx, with a broken right hinge. I was scouring the whole internet for a instructional video...
Me too, the exact same problem on a 17" laptop. I thought I could fix the small metal that's broken and change the back cover but now I see o gotta buy a fucking hinge
Thanks Adamant IT, I fixed my hinges and cover, I left the hinge screws slightly loose in order to reduce stress and strain on hinges assembly, 🙂👍👏👏👏. I hope HP needs to correct there designs. I hope they will pay me the spares cost to me.
In my case, Ebay title: HP 15-G 15-R 15-G019WM series laptop LCD Hinges AM14D000100,AM14D000200 by "keyboard-skin" (tell him I said hi and ask for a hard case, mine got slightly bent) Then Aliexpress: "New LCD Back Cover for HP 15-G 15-R 250 G3 255 G3 760967-001 AP14D000C70 Gray" Other spare parts are available too, part number search is great for finding good offers.
Thanks a lot for your information. My laptop is hp 15r-062tu. What is the name of your laptop? I think , the hinges and back cover are same for the all Hp 15 r notebook laptops. I am getting the hinges and back cover for 15r laptop but exact part numbers are not there.
I've a 15r-280no but these parts are universal for all 15r and beyond. BTW by inserting my AP14D000C70 into google image search I get hits on red covers too, they go by 760964-001, affordable on aliexpress. You can probably work your way to other colors the same way.
Interesting. I've just upgraded my sister's 15r to an SSD and found that one of those hidden screws had failed in exactly the same way. I made much more of a performance getting the screw out than you did! Good to know they aren't hugely structural. Incidentally - I've never had to jump through so many hoops to replace a disk. Ridicularse. I much prefer older corporate laptops that are designed for rapid servicing. That said, the i3 performance after the upgrade was pretty snappy.
You prolly dont give a shit but does anybody know of a way to get back into an Instagram account? I somehow lost the account password. I love any tricks you can offer me.
@Judah Callum Thanks so much for your reply. I found the site through google and Im in the hacking process atm. Takes a while so I will reply here later with my results.
I have same laptop . My hinges broke two times. This particular model is the worst model from hp . Today most laptops are not durable as compared to old laptops. Only Mac and Lenovo Yoga seems pretty durable.
Great Video! Competitive pricing has driven the quality of some products down. Lighter weight convenience = flimsy design. What did you use to clean it?
hi...oxus72...i've HP Notebook - 15-r213na (ENERGY STAR).. i need the new hinges and back cover...how i get these parts??? and from where???i'm from pakistan...
Hi Thanks for the video but as I was opening the laptop I accidentally cut the lcd cable I ordered one online and turned out to be the wrong one how can I find the right part for my computer 15g073 NR
Not sure if anyone will see this, but I have a very similar model and by accident I shut my laptop screen too fast and the plastic lining around the screen split near the left hand bottom corner and I cannot close it or else it will ruin the inner workings of my computer. (With it stuck in the open position, I cannot close it to remove the long hinge peice.) Does anyone have any suggestions on how to fix this? It looks pretty ridiculous carrying around an open laptop. Needless to say I'll never slam my laptop closed again.....
I have a hp 15r 204tx that I haven't used last one month so I did open it two days ago but it won't turn on it just shows the power led blink for 10 seconds and goes off as well as the wireless key led glowing red but it won turn on no other things happening the battery charges and the battery indicates that it charged and I performed the power reset as per the hp support Forum plz help me to make my laptop on its kind of urgency
I accidentally spilled alcohol on my HP laptop. I wasnt able to close the laptop and let it dry. So Some keys stopped working, the usb port is making my mouse do stupid things. And the system is slow. The hinges were broken months ago. What should i do? Like buy parts or ask an expert first? From the Philippines.
I hope you can read my comment. I have another HP laptop with a similar hinge, I've changed the backcover and display only to find out that that long thin metal(5:49) from it is now broken. How important is that? Since it's so thin I don't know which function it holds. I'm planning to order a new hinge only because of that but you can tell me if it's worth the change.
@@Adamant_IT Thank you! I ordered one because I was worried, should be here next week. The display alone is expensive(upgraded from TN go IPS) and didn't want to risk it. Will let you know the result!
i have a Hp 15 T-R000cto that the hinge broke and just like on your video the lcd cover broke. i cant seem to find parts for this computer. do you know if the hinges and lcd cover ment for the hp 15-r are compatible with what i have? or what is compatible?
@@Adamant_IT i got the hinges but would you happen to have the part number for the shinny black lcd cover you used in the video. i ordered one and its a ugly matte black so im sending it back.
I have HP Star Wars Special Edition 15-an050nr. I will change also hinges by my laptop. I ordered the hinges in US.27$. I broke LCD display and also the hinges. LCD display bought in Berlin. I am living in Austria. I also ordered the back cover in GB. I paid 50 Euro for the cover. If i have the hinges, i will change it. Do you have video for this model, HP Star Wars Special Edition 15-an050nr Hinges, thank you for the video.
Hello there, I find myself having to perform this exact repair for my own HP laptop, but I don't think it's worth getting a new top cover (it would cost about 5 times as much as just getting the hinges, which doesn't seem worth it for a 5 year old laptop). So I was wondering, would this work by using my current top cover with a strong adhesive to glue it to a new pair of hinges? I think that would have the added benefit of the screws not loosening over time, and since the surface area between the hinge and the plastic would be relatively large I think it would hold well, thoughts?
@@Adamant_IT Thank you for the reply. I think I'll try gluing the nuts to the cover first and checking periodically to see how it's holding up, and then if I find them loosening again I'll glue the whole hinge to the cover, thus avoiding any disastrous consequences.
What's the part number for the casing and the hinges? I thought this video would show a repair but instead shows a complete replacement :O is it expensive to replace?
Searching eBay for "HP 15-r top lid" and "HP 15-r hinges" will usually turn up results. The fault is so common on this model that the other day I was doing one and an eBay seller was selling kits with all required parts in it.
@@Adamant_IT haha you're right, just searched it and saw the kit. For $30usd may as well get the kit rather than try to repair it myself. Is there a way to strengthen the new one to try and prevent it from happening again? rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F153592614068
Nothing much you can do sadly. The best defense is to keep an eye on screen-wobble. If the screen has any play in it (so it wobbles without the hinges actually moving) then the screws are getting loose, which is what leads to them getting ripped out.
@@Adamant_IT my hinge set came in from eBay today. It has the two hinges (complete assembly of top and bottom) and the top lid (too casing and front lcd surround). Great tip on buying the set 👍
Hi I managed to complete this myself using your guide however during the repair the power switch ribbon got damaged at the soldered connections. Ordered a new one but laptop keeps shorting out even though everything appears to be in place. Any ideas?
Hey man thanks for the video. I have the same problem in my HP R217 NX but i couldn't find hinghes and back panel for that same particular model so i was wondering if hinghes and display back panel from other HP- R model would work. What you say?
Hey bro...i have successfully replaced the hinges but i have one problem. Whenever i close the lid the laptop doesn't goes to sleep mode. I have checked the software its already in sleep option only i think i might have missed something could you help me ?
that same thing happened to my laptop ,i didnt know i could fix it ,it got a lot worse the metal broke and now my laptop hinge is practically useless :(
Philips 0 I usually have more than one of the same size screw driver on hand, because they're always slightly different and one might fit better than another.
Before I purchased my last HP laptop, a person from HP headquarters ensured me, the problem me and many others were having regarding this hinge issue was fixed and this is no longer an issue. So I bought the one that I have now wouldn't you know it shortly after my extended warranty runs out it happens again. Nice fix job HP!
My laptop has the exact same problem, only that the hinge attachment to the base of the laptop was solid. So I just pulled apart the old and new hinges at their pivots and replaced just the screen assembly part of them, with a new back cover as the attaching points on the old one were shot.. This saved me from the trouble of pulling the base apart. As for the cause of the damage, it wasn't loose screws, as they were pretty tight when I removed them and I had no wobble. It was the plastic mounting points on the back cover that gave way.. Thank you for the video, it was an invaluable guide!
I'm surprised at the poor quality of HP laptops these days. I just repaired a 17-Y where the hinges and nuts were broken off much like you have here. In the end, I ordered a new back and hinge set to do the repair at a cost of $100 for parts alone. The notebook is made too cheap and the hinge tightness is too high. Seems this is far too common a problem.
I was given a laptop identical to that one, and I now regret not watching a video like this one prior to taking it apart. I didn't know that the keyboard had to come out first. I removed the bezel around it first, and in the process, severed the cable for the track pad, as well as ripping the power switch off of its ribbon cable, which led me to ask why HP designed it this way, rather than having the switch on the motherboard itself, in a spot where when the bezel was mounted, the power button would line up with the actual switch. I also noticed that they put the memory on the underside of the board, so in order to upgrade it, you have to remove the motherboard and flip it over to get at it. I'm going to attempt to fix the power switch, but not the trackpad, since I plan to use a mouse with it. Another thing that stuck me as odd was that it seems to lack Bluetooth, even though it was built in 2016. My 2010 HP Elitebook has Bluetooth, but this one, as well as my 2013 HP 2000 Notebook seem to lack that feature.
Very nice work You remind me of myself with the care and detail to making the customer happy.. Thank you for such a well made video.
Thank you sir...today i repair my laptop successfully by following your steps
Very Professionally done, great job! Nice to see a true technician at work, not like a lot of amateau here who trying to be a computer technician.
I also reinforcd the hinge sides with a piece of wire coat hanger & J-B Weld. I also used J-B weld to strenghten the hinge mount suppots on the lid; mine broke loose due to over tightened hinges.
Thanks a lot for your great video with the guidance I have repaired my laptop hinges today. Thanks again!
Very bad laptop quality these days by hp .... dell quality suffered a long time back and now hp is following them too
yes bro my hp laptop hinge broke 2 times which cost me a lot..just again it happened 3 back back.
God damn those HP 15r laltops have crappy build quality. I had the exact same issue with hinges. Gave it to local repair shop insfead of spending fortune on authorized HP repair and the repair guy messed the display up such that i cant control brightness on my screen anymore
Great video...I am the owner of a similar model, HP 15 r007tx, with a broken right hinge. I was scouring the whole internet for a instructional video...
Me too, the exact same problem on a 17" laptop. I thought I could fix the small metal that's broken and change the back cover but now I see o gotta buy a fucking hinge
Thanks -learning how to patch up my very bad HP laptop. Friends dont let friends buy HP. I learned too late.
amazing job done.
Thanks Adamant IT, I fixed my hinges and cover, I left the hinge screws slightly loose in order to reduce stress and strain on hinges assembly, 🙂👍👏👏👏. I hope HP needs to correct there designs. I hope they will pay me the spares cost to me.
you are correct it was very tight hinge lock nut need heavy force
had a panic attack since this happened to my laptop two hours ago; gonna try this out in the morining. Hope it works Thanks my guy
Did it worked for you? Plzz tell... i have same prblm'
Hi, nice video there. Please what can I search for on eBay or aliexpress or Amazon for the casing you bought. I have the exact type of laptop. Thanks
Parts just arrived, starting the rebuild. Many thanks!
oxus72 ..hi, Can you please tell me , where shall I get these pieces? Thank you :)
In my case, Ebay title: HP 15-G 15-R 15-G019WM series laptop LCD Hinges AM14D000100,AM14D000200
by "keyboard-skin" (tell him I said hi and ask for a hard case, mine got slightly bent)
Then Aliexpress: "New LCD Back Cover for HP 15-G 15-R 250 G3 255 G3 760967-001 AP14D000C70 Gray"
Other spare parts are available too, part number search is great for finding good offers.
Thanks a lot for your information.
My laptop is hp 15r-062tu. What is the name of your laptop? I think , the hinges and back cover are same for the all Hp 15 r notebook laptops. I am getting the hinges and back cover for 15r laptop but exact part numbers are not there.
I've a 15r-280no but these parts are universal for all 15r and beyond. BTW by inserting my AP14D000C70 into google image search I get hits on red covers too, they go by 760964-001, affordable on aliexpress. You can probably work your way to other colors the same way.
Thank you for your response...today I got part from ali express and assembled it in laptop. Now, I am able to fold the laptop :)
Interesting. I've just upgraded my sister's 15r to an SSD and found that one of those hidden screws had failed in exactly the same way. I made much more of a performance getting the screw out than you did! Good to know they aren't hugely structural. Incidentally - I've never had to jump through so many hoops to replace a disk. Ridicularse. I much prefer older corporate laptops that are designed for rapid servicing. That said, the i3 performance after the upgrade was pretty snappy.
You prolly dont give a shit but does anybody know of a way to get back into an Instagram account?
I somehow lost the account password. I love any tricks you can offer me.
@Moses Douglas instablaster :)
@Judah Callum Thanks so much for your reply. I found the site through google and Im in the hacking process atm.
Takes a while so I will reply here later with my results.
@Judah Callum it did the trick and I now got access to my account again. Im so happy:D
Thank you so much, you saved my ass !
@Moses Douglas No problem :)
I have the same problem. Thank you for the video!!! Where can I buy back lid?
Sir Hp made hinge nut to tight of this model i loose both for easy open top cover no need heavy force between bottom layer and top layer broken
I have same laptop . My hinges broke two times. This particular model is the worst model from hp . Today most laptops are not durable as compared to old laptops. Only Mac and Lenovo Yoga seems pretty durable.
And my casing melted due to heat from heater 😑
Great Video! Competitive pricing has driven the quality of some products down. Lighter weight convenience = flimsy design. What did you use to clean it?
Nice job.
Can i glue the broken part of the hind instead of a costly total replacement
Hi, do you know the screw type for the hinges?
I miss the way older laptops looked, its kind of like how most phones are practically the same nowadays.
HP 15- models are really cheap and low quality. on of mine is stuck as well and the screw holes are broken, Im gonna try to fix it
thanks
loving this videos!!!! this channel is awesome :)
I have a HP 15-g201AX laptop, what type of hinges can i use to replace the broken ones?
Adamant IT tq man..appreciate
from where i can get this new front cover and hignes??
Thank you for your information, I got the same problem. The laptop is same. Where shall I get the these hinges with back cover?
This helped so much, however I have no where any of the tools that you use. How much do you charge for this?
thanks sir ❤️❤️❤️❤️❤️❤️❤️
nice video =) very informative..can you tell me where did you buy the hinges?
Thank youuu so much for this vid
hi...oxus72...i've HP Notebook - 15-r213na (ENERGY STAR).. i need the new hinges and back cover...how i get these parts??? and from where???i'm from pakistan...
I have the same laptop with same problem where that thin metal with connected part broken on left side is it bad to stick it with glue.
Hi Thanks for the video but as I was opening the laptop I accidentally cut the lcd cable I ordered one online and turned out to be the wrong one how can I find the right part for my computer 15g073 NR
where did you buy the plastuc back cover and the hinges ? i need to fix mine
Not sure if anyone will see this, but I have a very similar model and by accident I shut my laptop screen too fast and the plastic lining around the screen split near the left hand bottom corner and I cannot close it or else it will ruin the inner workings of my computer. (With it stuck in the open position, I cannot close it to remove the long hinge peice.) Does anyone have any suggestions on how to fix this? It looks pretty ridiculous carrying around an open laptop. Needless to say I'll never slam my laptop closed again.....
Thanks.. very helpful...
Sir where can I bought that hardcase, hinge and the LCD screen. Ty
I have a same problem but on the right hinge only what u think can i solve it by weld it ?or i must change all Back cover ?
I have a hp 15r 204tx that I haven't used last one month so I did open it two days ago but it won't turn on it just shows the power led blink for 10 seconds and goes off as well as the wireless key led glowing red but it won turn on no other things happening the battery charges and the battery indicates that it charged and I performed the power reset as per the hp support Forum plz help me to make my laptop on its kind of urgency
Why not use LOCTITE on those screws
I accidentally spilled alcohol on my HP laptop. I wasnt able to close the laptop and let it dry. So Some keys stopped working, the usb port is making my mouse do stupid things. And the system is slow. The hinges were broken months ago.
What should i do?
Like buy parts or ask an expert first?
From the Philippines.
Sir can you please tell me the cost of that new hinge with plastic lid top
Thanks buddy :)
I hope you can read my comment. I have another HP laptop with a similar hinge, I've changed the backcover and display only to find out that that long thin metal(5:49) from it is now broken. How important is that?
Since it's so thin I don't know which function it holds. I'm planning to order a new hinge only because of that but you can tell me if it's worth the change.
@@Adamant_IT Thank you! I ordered one because I was worried, should be here next week. The display alone is expensive(upgraded from TN go IPS) and didn't want to risk it. Will let you know the result!
Why not use glue without new parts to fix the hinge?
i have a Hp 15 T-R000cto that the hinge broke and just like on your video the lcd cover broke. i cant seem to find parts for this computer. do you know if the hinges and lcd cover ment for the hp 15-r are compatible with what i have? or what is compatible?
@@Adamant_IT i got the hinges but would you happen to have the part number for the shinny black lcd cover you used in the video. i ordered one and its a ugly matte black so im sending it back.
this age its gone. the new ones are hard asf. touch screens with slim screens . hot air to change a screen ? no more screwdriver? Fk me
I have HP Star Wars Special Edition 15-an050nr. I will change also hinges by my laptop. I ordered the hinges in US.27$. I broke LCD display and also the hinges. LCD display bought in Berlin. I am living in Austria. I also ordered the back cover in GB. I paid 50 Euro for the cover. If i have the hinges, i will change it. Do you have video for this model, HP Star Wars Special Edition 15-an050nr Hinges, thank you for the video.
Hello there, I find myself having to perform this exact repair for my own HP laptop, but I don't think it's worth getting a new top cover (it would cost about 5 times as much as just getting the hinges, which doesn't seem worth it for a 5 year old laptop). So I was wondering, would this work by using my current top cover with a strong adhesive to glue it to a new pair of hinges? I think that would have the added benefit of the screws not loosening over time, and since the surface area between the hinge and the plastic would be relatively large I think it would hold well, thoughts?
I've not experimented with adhesives. I've seen stuff like Sugru used in hinge repairs, and it's held up, but not tried it myself.
@@Adamant_IT Thank you for the reply. I think I'll try gluing the nuts to the cover first and checking periodically to see how it's holding up, and then if I find them loosening again I'll glue the whole hinge to the cover, thus avoiding any disastrous consequences.
Thanks mate..
cool
I'm surprised that the laptop owner was willing to invest that much money into a really lame laptop
How much total time did it take you to repair the laptop
thanks
How much does hinge and back panel cost?
what is body price
What's the part number for the casing and the hinges? I thought this video would show a repair but instead shows a complete replacement :O is it expensive to replace?
Searching eBay for "HP 15-r top lid" and "HP 15-r hinges" will usually turn up results. The fault is so common on this model that the other day I was doing one and an eBay seller was selling kits with all required parts in it.
@@Adamant_IT haha you're right, just searched it and saw the kit. For $30usd may as well get the kit rather than try to repair it myself. Is there a way to strengthen the new one to try and prevent it from happening again?
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F153592614068
Nothing much you can do sadly. The best defense is to keep an eye on screen-wobble. If the screen has any play in it (so it wobbles without the hinges actually moving) then the screws are getting loose, which is what leads to them getting ripped out.
@@Adamant_IT my hinge set came in from eBay today. It has the two hinges (complete assembly of top and bottom) and the top lid (too casing and front lcd surround). Great tip on buying the set 👍
Can you do this with a chrome book??
HP Body Nowadays Suck Earlier Laptops had hard body nowadays very weak body when first time opened
15-r120ne?
Hi I managed to complete this myself using your guide however during the repair the power switch ribbon got damaged at the soldered connections. Ordered a new one but laptop keeps shorting out even though everything appears to be in place. Any ideas?
Hey man thanks for the video. I have the same problem in my HP R217 NX but i couldn't find hinghes and back panel for that same particular model so i was wondering if hinghes and display back panel from other HP- R model would work. What you say?
Adamant IT yeah thanks man..good video
Hey bro...i have successfully replaced the hinges but i have one problem. Whenever i close the lid the laptop doesn't goes to sleep mode. I have checked the software its already in sleep option only i think i might have missed something could you help me ?
@@pravinnirmaldoss You missed the small magnet which is placed on inside the front panel of the display.
@@sandeshkumar9156 got it by then itself. Thanks for the reply man .ll. 😉
@@pravinnirmaldoss that's okay Bro. I have ordered the back panel along with the hinges, but I am not sure I can get the screws for the same
from where i can get this new front cover and hignes??
Mirza Noman hinges***
that same thing happened to my laptop ,i didnt know i could fix it ,it got a lot worse the metal broke and now my laptop hinge is practically useless :(
Is this model laptop can upgradeable extra ram and SSD
Yes, these laptops generally respond well to more RAM and an SSD
Do you have a shop?
Did that turn on after
I have the same model facing the same issue......I think its a poor design
how much it costs you
All that shit just to fix hinges.. il just stick to tape
ruclips.net/video/2V4A8MbyQRI/видео.html what is the screw drive uou used? i stucked in this
Philips 0
I usually have more than one of the same size screw driver on hand, because they're always slightly different and one might fit better than another.
@@Adamant_IT Thank you
The same thing happened with my laptop because my youngest son accidentally dropped it on the floor 😩
You have repaired your laptop if pls tell from where you buy back panal
If yes psl tell me
Sorry 9416762371
Pls don't ignore my comment I need that particular parts buying link or web site
Adamant IT thanks frnd
Apparently HP sucks. -_- Never again