Best feeling ever haha. Man I love my 335is. My wife says I spend too much time with it, cleaning it, working on it or talking about it. It’s a great love/hate relationship.
I changed my camshaft sensor on Intake side and crank sensor last year because check engine would turn on and the car wouldn't crank up after it was hot. My 335i started stalling recently at low rpms at red lights and stop signs, changed the vacuum lines and came to realize it was mainly my camshaft sensor bank 1 b exhaust code P130A. After that Idle went smooth and car hasn't stalled since or jerked while driving, felt great
I had the same problem with my 335i when I got it. My car went into limp mode and when I drove it home right after I got a cylinder misfire from cylinder 6, which turned out to be a ignition coil. I thought I could play it slick by ordering a cheap $13 sensor from ebay, no luck. You need the original Siemens vdo (now bought out by Continental) for the car to leave limp mode. The dealer apparently charges $1100 for this replacement
This looks like it might be the one job that is easier for N54 (on my N52 /328xi I had to remove intake manifold). I had the same feeling when my new sensor was in.
I just did mine like 3 weeks ago... a very long extension and a joint on the end helped me a lot. 10 min sensor was off and on. All he symptoms i had scared the hell out me too lol
My 2004 BMW 530i has a horrible vacuum like behind the intake manifold, they capped it off. My mechanic suggested almost $500 doing the entire intake manifold no thanks, there is no leak coming from there and I am not losing coolant, pop off the microfilter housing and replace the cap then smoke the intake and see if it fixes it ha; I’m gonna smoke it first to see how effective it is. Always love your videos! Definitely gotta work on these cars, and I’m forcing myself to learn how to.
Simply Car Things so an update, I can actually access the vacuum cap with ease on my 5 series, ordered a new part was only $6, also my air filter was shot, previous owner never changed it. What a difference that made!
im getting a Cam Sensor number also! My 2008 335xi coupe is in limp I guess.. Half lite engine on gauge ..if I get up on it, it starts bogging out. as soon as I ease up on gas pedel, it kinda goes away .. Some one said its near my vannos in front? .. I also have a oil leak coming from my vannos or one of the 2 cam sensors on each side of it.... wont know were the oil leak is coming from until I remove the valve cover(cover) to see it better
Would it cause a no start as well? Chasing down stuff. Was having long cranks, but now it wont start at all anymore. Crankshaft sensor code and cyl injection cutout
Had the trans malfunction on for a while changed the battery checked alternator fluid was full haven’t checked cps hopefully it’s what’s wrong with mine too
Simply Car Things no but as soon as it starts the rpm fluctuates for a few seconds then settles down. I do get trans malfunctioning and engine malfunction it’s so annoying and I don’t get to enjoy my car
CPS are notorious for stalling at idle and no start conditions. Ive had to replace them in all my cars I've owned. Just a cheap part that gets toasted by heat over time
I got the same issue going on but it also had a really bad electric whine, when I hit the gas pedal I hear the whine more louder then the exhaust sound. Could it still be the crank shaft positioning senior or is it my transmission ??
Same thing happened to me when I had my E92 335i 08 model. Scary thing is that my car actually shut off on me at a stop light because of that sensor. Glad to see you got it fixed though.
So glad you're car is okay bro! I'm in the market for a 335i and been using TF out of your channel for any questions I have. This issue had me a little hesitant but since it's only the CPS I feel so much better. Hopefully I'll have my 335i no later than march!
My brother's e60 535xi is down and out also. It was getting really long crank before it started so figured that it must have been the hpfp. Bought a new hpfp and replaced it and also did new spark plugs. After installing everything the car would crank but won't start at all. I'm down to this. Ordered a new crankshaft sensor and going to be replacing it next week when it comes in. Fingers crosses that she will start up! Will keep you posted! Great video by the way! Keep it up bro!!
My car has been having the rough idle issue for the so long. Do you think this might help it? Yesterday was the First time I got a engine malfunction sign. This has me so worried
By any change did your starter click once and felt like the battery was weak I’m having a one click no start problem I already checked the starter it’s fine by I don’t know anymore on what to do no codes
Hey there. Curious why didn’t you remove your intake manifold before trying to get to the sensor? Would that have helped? About to attempt my sensor tonight on my 08 e90...a tad nervous
hi bro i have also same pro i change but still same issue even i change cam sansor also its me me tomuch stress if u get any posiblty to fix it please let me know thanks
Glad you got your ride fixed bro, noticed you have a scan tool. in your opinion, whats a good scan tool to get that will work great for bmw. I have a 2011 e90 n52. Thanks!!!
I changed My 2006 bmw 325xi crankshaft sensor and car got messed up like shaking really badly to the point it felt like shutting off then started smoking a bit now it’s been sitting don’t know what’s wrong with it anymore any suggestions?
Hi I have a 2008 335i and mines does turn on but it stalls I thought it was the camshaft sensor but the scanner indicated it’s po335 code which is the crankshaft sensor please tell me what do you think
Can you buy a good 335i for like 12k or do you have to invest at least like 16k for a good one? And whats the mileage limit for a car like this? Can a 335i with 120k miles still be good? (I love cars but dont really know what to look out for if I wanna buy one.)
Good to know :D It a bit luck every time cause you never know what will happen after 1-2 month I think :/. I found your channel like 2 days ago an I love your content :D Keep it up!
thank you! I used a scanner built into the MHD tuning app I was using back then. You can download it off the Google Play Store if you have an Android device
Get BMS dual cones. Glad you got the bimmah running. I've done that fix too, I broke one sensor and ordered another. Also if you look closely when you order, (got mine from ecs), you'll see the o ring is in fact a separate part. A LOT of parts are like this. You'll have to order the screws separate for some parts because the screws are to be used ONCE. Live and learn. Have fun brotha
So did you have to do any resetting once you installed the crankshaft sensor mine has done the exact same thing but after I replaced it it will only crank and not start
@@SimplyCarThings ok I will try that, it does wiggle a slight bit and I felt like the bolt was going to strip if I tightened it down anymore and I don't need that
it is actually really really similar happened to my 335i 2007 all the codes and errors comes on the screen and cars doesn't change the gears, showed my mechanic and he told me its electrical problem, you have to go to electrician and i know they gonna rip me off with this one, thanks for your vdo hopefully this sensor gonna fix the same issues in my car as well
Hey I'm looking for the videos leading up to this. Iv done a new battery, new alternator n I'm at the point of this sensor. I want to see if symptoms are the same. Great job btw
Hey bro. Love your channel. You mentioned in the title of this video that's this $80 part nearly destroyed your car. I can't seem to find your earlier videos that give the background on this. Can you please let me know how this part failing nearly destroyed your car? Thanks!
Mark Gill go to my channel and find this exact video under the video list. The two videos uploded prior to this one give all the background on the issue
I'm sure you've answered this question a million times, but I would like to know what scan tool/software do you use? I'm looking for the best option for coding and clearing fault codes. Right now I'm looking at iCarly and INPA. any advice/tips would be appreciated. BTW Great job on fixing your car!!
Dude when you type in crankshaft position sensor on RUclips there’s a bunch of camshaft position sensor’s and I accidentally replaced the wrong part thinking that I replace the crankshaft position sensor later on I noticed that I didn’t change it it’s much more of a hassle than the camshaft
Man!, I'm glad that your ride started up! I was happy with you bra! I see why BMW charges a mint to repair a part that is located in the area of the engine bay that it is! Where can I find a code reader that works best on BMW 335i?
Lit ! I knew it wasnt ur alternator. I blew a motor and at first I thought it was that sensor so I have an extra one but glad your cars good man ! #n54problems
Thank you for this! Currently having problems and my scan tool said one of the issues is my crankshaft sensor, so this gives me some optimism. Btw 6:10 is so relatable lmao
Just came back on this video because I think my crankshaft position sensor is beginning to fail. (Long cranks on cold start sometimes, hiccups in idle, and under acceleration i get hesitation around 5000-7000rpm
something like this www.ebay.co.uk/itm/MTC-MOTORSPORT-BMW-335i-135i-N54-HIGH-FLOW-INLET-INTAKE-KIT-07-10-BLACK/263236267167?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D49896%26meid%3D810d36a398764d6698c38d343610e33f%26pid%3D100005%26rk%3D1%26rkt%3D2%26sd%3D292240987527&_trksid=p2047675.c100005.m1851
I love that feeling when you complete a repair. Best feeling ever
Indeed it is :)
Glad you got it fixed, man!
Always a great feeling when you fix a BMW issue 👍🏻
Indeed! Thanks for your input man!
Best feeling ever haha. Man I love my 335is. My wife says I spend too much time with it, cleaning it, working on it or talking about it. It’s a great love/hate relationship.
6:10-6:24 every guy who ever worked on their own car can relate to this moment lol
So damn true hahaha!
then 5min later the check engine light is back.....
@@rampage3337 For something completely new...unless your previous fix was a bubble gum.
I like Energy you showed when you started up the car
I changed my camshaft sensor on Intake side and crank sensor last year because check engine would turn on and the car wouldn't crank up after it was hot. My 335i started stalling recently at low rpms at red lights and stop signs, changed the vacuum lines and came to realize it was mainly my camshaft sensor bank 1 b exhaust code P130A. After that Idle went smooth and car hasn't stalled since or jerked while driving, felt great
You had pure joy hearing that car start, best part of the video! Your videos do not have to be D.I.Y for us to get the point, Thank you! Much love
really appreciate it! Glad you enjoyed
I had the same problem with my 335i when I got it. My car went into limp mode and when I drove it home right after I got a cylinder misfire from cylinder 6, which turned out to be a ignition coil. I thought I could play it slick by ordering a cheap $13 sensor from ebay, no luck. You need the original Siemens vdo (now bought out by Continental) for the car to leave limp mode. The dealer apparently charges $1100 for this replacement
This looks like it might be the one job that is easier for N54 (on my N52 /328xi I had to remove intake manifold).
I had the same feeling when my new sensor was in.
I just did mine like 3 weeks ago... a very long extension and a joint on the end helped me a lot. 10 min sensor was off and on. All he symptoms i had scared the hell out me too lol
Nice! I wish it took me ten minutes haha if i was more experienced it would've beel a lot easier
Yes, but its all just patience and all these DIY's that are avaialble make it that much easier. keep up the work and great videos bro, from LA
Will do thanks bro :)
lpa187 what symptoms did you have ? Dealing with a crank no start issue thanks in advance
Glad you got your car running bro it obviously means a lot to you
Thanks man! It really does
Can this cause limp mode if I just changed vanos and all spark plugs and coils ?
My 2004 BMW 530i has a horrible vacuum like behind the intake manifold, they capped it off. My mechanic suggested almost $500 doing the entire intake manifold no thanks, there is no leak coming from there and I am not losing coolant, pop off the microfilter housing and replace the cap then smoke the intake and see if it fixes it ha; I’m gonna smoke it first to see how effective it is. Always love your videos! Definitely gotta work on these cars, and I’m forcing myself to learn how to.
Thanks bro good luck to you! Yea, I am learning myself its challenging but worth it
Simply Car Things so an update, I can actually access the vacuum cap with ease on my 5 series, ordered a new part was only $6, also my air filter was shot, previous owner never changed it. What a difference that made!
What fault code was she throwing ?? Was it 2A87? How did u know it was the sensor ? Help :(
What codes where you getting??
If you remove the starter it makes it super easy to get the bolt for the cps.
im getting a Cam Sensor number also! My 2008 335xi coupe is in limp I guess.. Half lite engine on gauge ..if I get up on it, it starts bogging out. as soon as I ease up on gas pedel, it kinda goes away .. Some one said its near my vannos in front? .. I also have a oil leak coming from my vannos or one of the 2 cam sensors on each side of it.... wont know were the oil leak is coming from until I remove the valve cover(cover) to see it better
Did you ever get this figured out?
Would it cause a no start as well? Chasing down stuff. Was having long cranks, but now it wont start at all anymore. Crankshaft sensor code and cyl injection cutout
did you fix it my guy ?
What scan tool do you use? I wanna get one for my 2011 e90 328i just Incase
What codes did it give you when it was running rough?
words could not describe that look when she turned over......great job! And now another BMW mystery solved for when mine eventually goes out lol!
Indeed! One mystery solved haha thnx man!
What were the codes?
Had the trans malfunction on for a while changed the battery checked alternator fluid was full haven’t checked cps hopefully it’s what’s wrong with mine too
hopefully man! Does the car have a long crank on start up?
Simply Car Things no but as soon as it starts the rpm fluctuates for a few seconds then settles down. I do get trans malfunctioning and engine malfunction it’s so annoying and I don’t get to enjoy my car
Get a code reader and pull the codes. That will be your best bet to pin point the issue
Bro... do you have a Porsche? Also your reaction when the car started was priceless😂
Nour Hummadi I can't stop laughing about that!🤣
N54 Lord fr
Yes...well it's not mine hahaha. and thanks bro i was so happy lol
Simply Car Things Believe me when I say I know the feeling!!!
Just had that same problem. I can completely relate to been stoaked when it's a easy fix when you have been thinking the worst case scenario
CPS are notorious for stalling at idle and no start conditions. Ive had to replace them in all my cars I've owned. Just a cheap part that gets toasted by heat over time
yep, so thankful that was my issue
I got the same issue going on but it also had a really bad electric whine, when I hit the gas pedal I hear the whine more louder then the exhaust sound. Could it still be the crank shaft positioning senior or is it my transmission ??
Same thing happened to me when I had my E92 335i 08 model. Scary thing is that my car actually shut off on me at a stop light because of that sensor. Glad to see you got it fixed though.
Wow this what jus happened to me the other day at the light 😂🤦🏽♂️
So glad you're car is okay bro! I'm in the market for a 335i and been using TF out of your channel for any questions I have. This issue had me a little hesitant but since it's only the CPS I feel so much better. Hopefully I'll have my 335i no later than march!
Good luck man! Yea these cars will test your patients but theyre awesome
Tey Enki I have a 2007 335i. With only 81000+ miles on it for sale.
Daniel Day Have the turbos been replaced? Still under warranty until 82k
My brother's e60 535xi is down and out also. It was getting really long crank before it started so figured that it must have been the hpfp. Bought a new hpfp and replaced it and also did new spark plugs. After installing everything the car would crank but won't start at all. I'm down to this. Ordered a new crankshaft sensor and going to be replacing it next week when it comes in. Fingers crosses that she will start up! Will keep you posted! Great video by the way! Keep it up bro!!
Thanks so much man! Good luck to you!
What ended up happening with this?
My car has been having the rough idle issue for the so long. Do you think this might help it? Yesterday was the First time I got a engine malfunction sign. This has me so worried
By any change did your starter click once and felt like the battery was weak I’m having a one click no start problem I already checked the starter it’s fine by I don’t know anymore on what to do no codes
Hey there. Curious why didn’t you remove your intake manifold before trying to get to the sensor? Would that have helped? About to attempt my sensor tonight on my 08 e90...a tad nervous
hi bro i have also same pro i change but still same issue even i change cam sansor also its me me tomuch stress if u get any posiblty to fix it please let me know thanks
Any update on this?
Glad you got your ride fixed bro, noticed you have a scan tool. in your opinion, whats a good scan tool to get that will work great for bmw. I have a 2011 e90 n52. Thanks!!!
i use the scanner off the mhd flasher app!
I changed My 2006 bmw 325xi crankshaft sensor and car got messed up like shaking really badly to the point it felt like shutting off then started smoking a bit now it’s been sitting don’t know what’s wrong with it anymore any suggestions?
Did the sensor fix the limp mode?
Your videos are awesome helped me out a lot!
Glad i can help!
Hi, my car has the same issue. Can I get some advice please. What did you use to clear the codes an what codes did you have?
What code did you get to know it was the crankshaft sensor?
What code where you getting bro
Hi I have a 2008 335i and mines does turn on but it stalls I thought it was the camshaft sensor but the scanner indicated it’s po335 code which is the crankshaft sensor please tell me what do you think
Hey I need help I keep getting the crankshaft sensor and a intake boost sensor but I changed the intake one
The reaction when the car started was priceless. I know the feeling man...
Hahaha, thanks man!
What scan tool do you use for your car?
what obd2 reader do you use. i have seat belt warning lights that i would like to reset. can u pls help
I use the scanner off the mhd flasher app !
Hahahahaha your face when it started
Glad you got it fixed!
Thanks bro hahaha!
Yoo! It's a blessing that the sensor went out. Those intakes could've done some damage if it didn't. There's always a positive 👌
What wheels are you running ? and specs if possible too, thanks !
Can you buy a good 335i for like 12k or do you have to invest at least like 16k for a good one? And whats the mileage limit for a car like this? Can a 335i with 120k miles still be good? (I love cars but dont really know what to look out for if I wanna buy one.)
Dark-Natsu its tough to say man. I bought mine for $9k its currently at 123k miles
Good to know :D It a bit luck every time cause you never know what will happen after 1-2 month I think :/. I found your channel like 2 days ago an I love your content :D Keep it up!
Great video and fix. Do you have a video on the scanner you are using..
thank you! I used a scanner built into the MHD tuning app I was using back then. You can download it off the Google Play Store if you have an Android device
How ? How would a sensor destroy a whole... ....car ?
Get BMS dual cones. Glad you got the bimmah running. I've done that fix too, I broke one sensor and ordered another. Also if you look closely when you order, (got mine from ecs), you'll see the o ring is in fact a separate part. A LOT of parts are like this. You'll have to order the screws separate for some parts because the screws are to be used ONCE. Live and learn. Have fun brotha
Thanks man! Yea i was surprised the o ring didnt come with the sensor but its all good ! Thanks for the input man
Hahaha loved your reaction Bro ! Haha glad you figured it out and fixed it lol
Thanks man! hahaha
Would you say if you had access to a lift, do you think it would've been easier replacing the part or just as difficult?
Nah I dont think a lift would've made it much easier to be honest!
Whats the website again?
So did you have to do any resetting once you installed the crankshaft sensor mine has done the exact same thing but after I replaced it it will only crank and not start
no mine started up after install, make sure you pushed the sensor all the way so that it's connected!
@@SimplyCarThings ok I will try that, it does wiggle a slight bit and I felt like the bolt was going to strip if I tightened it down anymore and I don't need that
Do you know where i can get a heatshield for my hood?
What size o-ring was it?
it is actually really really similar happened to my 335i 2007 all the codes and errors comes on the screen and cars doesn't change the gears, showed my mechanic and he told me its electrical problem, you have to go to electrician and i know they gonna rip me off with this one, thanks for your vdo hopefully this sensor gonna fix the same issues in my car as well
What happened
Check out the AFE intake full system. Its quality man. Great job on your repair.
Hey I'm looking for the videos leading up to this. Iv done a new battery, new alternator n I'm at the point of this sensor. I want to see if symptoms are the same. Great job btw
Nice vid man, you remind me of me when I get a part on my 335 fixed haha
What exactly was your car doing? My car is acting crazy and won’t start. I replaced a ton of crap but still acting crazy.
Did your car stall when the crankshaft position sensor went bad ?
it didnt stall but after i brought it home it wouldnt start and just kept cranking
Great reaction! So how do i know if my sensor is by starter or upfront by vanos? I have an 07 335i e92.
Adrian Olivares thanks! Check your obd codes!
Hey bro. Love your channel. You mentioned in the title of this video that's this $80 part nearly destroyed your car. I can't seem to find your earlier videos that give the background on this. Can you please let me know how this part failing nearly destroyed your car? Thanks!
Mark Gill go to my channel and find this exact video under the video list. The two videos uploded prior to this one give all the background on the issue
Thanks bro!
you just jacked the car up on the right side and get to the sensor right under the starter without having to remove all that junk on top?
I'm sure you've answered this question a million times, but I would like to know what scan tool/software do you use? I'm looking for the best option for coding and clearing fault codes. Right now I'm looking at iCarly and INPA. any advice/tips would be appreciated. BTW Great job on fixing your car!!
Thanks man! And I use the MHD app which you can get off the android marketplace to read codes!
use inpa
I just downloaded this software last night. I'm waiting on my cable to arrive Thursday. Thanks for the tip.
chillmagnet for which chassis
I have an 07' 335i E92. I believe I ordered the K+DCAN cable, USB to OBD2.
have you ever fixed or seen a surging idle?
- 2010 e92 6spd n54
During cold start ?
vanos solenoids, coils, spark plugs camshat sensor do all of these
Bro I am happy you got your car going again. Car problems are no fun
Thanks so much man! Yea i agree
Dude when you type in crankshaft position sensor on RUclips there’s a bunch of camshaft position sensor’s and I accidentally replaced the wrong part thinking that I replace the crankshaft position sensor later on I noticed that I didn’t change it it’s much more of a hassle than the camshaft
Your videos are so much simpler than all the other videos I’ve watched
Man!, I'm glad that your ride started up! I was happy with you bra! I see why BMW charges a mint to repair a part that is located in the area of the engine bay that it is! Where can I find a code reader that works best on BMW 335i?
Lit ! I knew it wasnt ur alternator. I blew a motor and at first I thought it was that sensor so I have an extra one but glad your cars good man ! #n54problems
Thanks so much man! Yea glad it wasnt the alternator
Bms dci or might as well get relocating inlets (vrsf, psp, mmp)
man those n54s haul ass but I’m glad I got an n52! Too much maintenance bullshit for me to make an n54 worth it
What did you use to clear the code?
MHD Flasher
Hey man just want to thank you for this video, you save me a lot of money...
no problem! thanks for watching!
I wonder if the euro intake for the n52 will work for your engine .Props on getting the car back in good shape!
Thanks so much man!
Who Did you order the crankshaft sensor from? You are saying that way too fast??? FPC euro
Mark Farnsworth FCP Euro
FCP Euro ! Haha
Any tips for buying an e60 5 series? Looking at an 08 550I. Want under 100k miles and I need reliability!
I've heard theyre unreliable! I would be careful with a 550i personally
if you like dumping money on cars get the 550i
This is problem came after your tune, correct?
Did it make like a motor noise or something like that when you are driving? And another question is that did it make it vibrate or not drive smoothly?
Not really it put me in limp mode and the transmission wouldnt shift out of 3rd gear. also car wouldnt start
Thank you for this! Currently having problems and my scan tool said one of the issues is my crankshaft sensor, so this gives me some optimism.
Btw 6:10 is so relatable lmao
Is your car on lowering springs or coilovers?
Venir Lekha coilovers
FCP IS IN MILFORD,CT...BEST EURO PARTS EVER..
Agreeeeed!
Just came back on this video because I think my crankshaft position sensor is beginning to fail. (Long cranks on cold start sometimes, hiccups in idle, and under acceleration i get hesitation around 5000-7000rpm
Did you find out your problem
Thanks for sharing 👍
I have the same problem but I was think that part was located at the front
Glad you got it fixed bro! The engine sounds really aggressive!
Thanks bro! Yea i love the sound
When the car fired up, I felt that. I own a 2007 335.
Yuna you know the feeling man!
Simply Car Things I sure do, in fact I just got mine back from the mechanic for a new....water pump!
glad you found the issue. Keep it up :)
Thanks brotha!
great news that it was the cps, thought it would be, take a look at the foam intake filters, ramair are good but theres others
Thanks man! I'll look into those
something like this
www.ebay.co.uk/itm/MTC-MOTORSPORT-BMW-335i-135i-N54-HIGH-FLOW-INLET-INTAKE-KIT-07-10-BLACK/263236267167?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D49896%26meid%3D810d36a398764d6698c38d343610e33f%26pid%3D100005%26rk%3D1%26rkt%3D2%26sd%3D292240987527&_trksid=p2047675.c100005.m1851
My hood is smoking I have p0015 code anyone know what it is???
glad ur car is running again bro!
Thank you my dude!
Does this mean charge pipe install vid coming soon ?
I have some other videos and stuff planned for the car right now, but hopefully soon :D
Bruh we’ve all made that face when your car started hahaha
agreed reaction was authentic .. I have made that reaction. hahahaha.thanks for posting this fix!
“Let’s get right into the video” then we are bombarded with a freakin title sequence😂😂😂
+Simply Car Things are you involved with CLAFD in anyway or just a fan/supporter?
Ando M Just a fan! One of my closest friend’s Dad works for them 👍🏼
Oh cool, I see
Where's your charge pipe?
Trevor. I'd bet he had clamping issues.