May I also introduce you to the BMW M12/13, 4 cylinder that actually ran in F1 ruclips.net/video/NmsCte3pF4w/видео.html ruclips.net/video/GCAWdo2WAI0/видео.html
@@Emira_75 Likely a dry sump and billet crank with a crank girdle. Head is likely converted to shim less buckets and high spring rate springs with oversized valves After that everything is normal to a built motor, balanced with forged internals and porting with ITBs.
I mean a honda with same build setup will sound very similar and Those can make 400hp NA but ive never seen a 4age pushed to these heights and honestly im blown away
LOVE this!! Mikko taking it to the ragged edge! As the old cliché in racing goes : If you never (almost) lose it or crash, you know you're not going fast enough.
Awesome driving and nice save as well and 2022. is the last this car had 4AGE engine since it will be replaced with RPE V8 engine for 2023. season.Honestly looking forward to seeing that.
This a re upload because you did a video on this already? Not that its a problem but if you are looking for content post some off the bloopers and just general videos of hill climb events you went to
Sky high RPMs, super aggressive cam profiles, ported everything to make it all flow with minimal restriction, and probably plenty of reinforcing with forged/treated parts to keep it from grenading itself... Keep in mind, you could also see that this thing isn't exactly kicking out a whole lot of torque(and you can see that even at higher RPMs, it's not exactly putting a whole lot more power down. I'd reckon that it's probably tapering off on power by 8.5-9k rpm and the extra rpms are more for gearing than for actual power production.
@@maqywhaq that’s not even half of it. You’ll need to have your head machines, the cams will be too big, so you’ll need to notch the cylinder head to make sure they clear, new shims, new valve springs, high compression pistons, you’ll need a dry sump system, fully balanced internals and you’ll need to stiffen the bottom end. You’ll have to run BIG ITBs, 48mm+, and that’ll have you right around 260hp at around 11,000 RPM. and you can run even higher if you have a shorter rebuild interval.
4A-GE is loving those rpms ! 😎💪🎌
Wrong.
Why don't you grow up from the low class?
@Damar Fadlan
I would have to agree with you on that one.
It makes me think of the Alfa 155 from Gran Turismo.
4A-GE powahhhh!!! 😍😍😍
*4A-GE
@@texasfoci you mean Alfa 155 TC from Gran Turismo 2 or 155 V6 TI on GT4?
Probably the most F1 sounding 4-cylinder I’ve heard. Beautiful
May I also introduce you to the BMW M12/13, 4 cylinder that actually ran in F1
ruclips.net/video/NmsCte3pF4w/видео.html
ruclips.net/video/GCAWdo2WAI0/видео.html
@@SUPRAMIKE18 yes!
Read the title, it’s a V8.
@@daddams2538 4A-GE is a 1.6L 4 banger
What about yamaha r6?
11k rpm 4age is insane!
I don't really understand how that exists
@@Emira_75Bunta Fujiwara
1:51 WHAT A SAVE
Love Mikko's KP!!! The level of development is simply amazing. 11k rpm sound.... no words 🤤🤤🤤😍😍😍
Very curious to see the next version of it...
@@HillClimbMonsters Yeah!!! Waiting impatiently to see it!! It would be a good idea to put this 4AGE in my hillclimb AE 😂😂🤤🤤
@@HillClimbMonsters how does that engine do 11k rpm?
@@Emira_75 Likely a dry sump and billet crank with a crank girdle. Head is likely converted to shim less buckets and high spring rate springs with oversized valves After that everything is normal to a built motor, balanced with forged internals and porting with ITBs.
@@HillClimbMonsters hopefully an engine swapped Subaru 360 with Escudo Dirt Trial Car engine.
Love the sound of N/A engines
We don't.
A lot of noise for no forwards motion.
@@Gma7788 emotions.
@@Gma7788 we'd still be running and enjoying the roads while you guys can sit and rebuild your forced induction engines👌
@@Gma7788 Wrong
@@jayfujiwara9740 they only can drive on straight line 😂
The 4age has to be one the best sounding 4 cylinder engines ever
Agree!!!!
Very high up there, probably on par with the M12/7..
I mean a honda with same build setup will sound very similar and Those can make 400hp NA but ive never seen a 4age pushed to these heights and honestly im blown away
Sounds amazing. Great audio and in car footage lads.
Thanks ;) You can check more of this little Monster right here www.youtube.com/@VHTRacing
That car sounds wilder than several years ago when we saw Mikko run up Mount Washington. Great show!
damn, now this looks and sounds sooo good
LOVE this!!
Mikko taking it to the ragged edge!
As the old cliché in racing goes : If you never (almost) lose it or crash, you know you're not going fast enough.
this monster starts to get happy 1.000 rpm past my redline and then goes on for 3.000 rpm more....unreal!
Always love seeing the VHT racing 4AGE
V8 coming next ;)
Love this car. Their RUclips channel is great, VHT Racing.
Real race engine. No motorcycle engine in a car. Sounds so much better and more technical. Race enginge
This build is sweet!
About to get sweeter!!
My mum had a Starlet, it was canary yellow. Standard and slow. But fun for being rwd. Years later they became very sort after and valuable!
Doing an amazing job keeping it in peak power
Yes yes and yes !!! Love that sound. Pedal to the metal. 🙌🏻
Now thats what im talking about! Much better then "class spec supercars"
Have to agree...
I wish this video was an hour long. That's beautiful music!!
Probably takes the cake for being the loudest little beast around. lol
Very high up there!!
awesome footage from brakes and supension, thx HCM for an another great video.🍻
Our pleasure ;)
the car looked so happy it's cute
Crazy High RPM 🔥
I love how they had to cram the numbers in on the screen overlay tachometer, so much rpm they ran out of room xD
the velocity stacks gulping that air at high rpm what a godly sound
Toyota starlet, a well known legend. Bullet proof engine.
that engine is piece of ART
The engine swapped KP62 STARLET kinda reminded me a lot to Ferrari 412T2. Amazing!
Omg.This car is crazy.Very nice sound intake and exh.Good video👍
Wrong.
Thanks ;)
@@Gma7788 Wrong
Wow, this engine and Honda B/K series are something else.
That might be the Coolest race car I have seen, ever!
This little 4A-AGE makes 160HP PER LITER. That is insane 🤯🤯🤯
It´s about as crazy as the 4A-GE gets...
Wild how far the 4AGE tech has come
🤨 shit was going on in the early 00's
MAGNIFIQUE🔬🏁🎼🎬
all the adjustability there for the antiroll bar!
this thing goes hard
What a ride ❤❤
This is real life 11000rpm 4A-GE AE86 Takumi's on Initial D, btw waiting new incrediible engine on Mikko Kataja´s KP62.
Double Hayabusa V8 ftw...
I appreciate detailed onboard part 👀
Excelente lovely sound
Would love to have that engine and gearbox in my Mini...brutal!
Look for a german video." Mini cooper mit hayabusa heckmotor( tim schrick)". Sonething close to the engine of that starlet. Pretty funny also...
bunta & takumi fujiwara approved👍
_[loud space boy playing]_
Tres belle voiture cette petite toyota
What a little maniac!
Oooooohhhh what a feeling it must have been 🙃♥️☮️🍻🍻🍻
"Make sure to rev it up to 11k rpm"
Just air shifting my sequential in my starlet. How good
Beautiful car and engine is fast and furious!
I'm excited to see the up coming V8 going in this thing next!
Doesn't just get there, actually produces good torque all the way out to 11,000 rpm,
Though not so much down at 4k🙂
Sounds like a swarm of very angry killer bees on steroids. What a machine.
4AG
Wonderful
Damn, solid axle too it seems? It's cool to see it
And with a simple panhard bar! Old school and very very cool.
Class restrictions I think... I might wrong...
@@ssc00pwhat class?😊
Like to see a full onboard of this! Love me some starlets....
Check this little Monsters´ Channel right here www.youtube.com/@VHTRacing
thanks yamaha for that wonderful sound 🔥🔥🔥
Toyota 4A-GE...
More 4AG 🔥🍒😍
glorious sweet noise
Awesome driving and nice save as well and 2022. is the last this car had 4AGE engine since it will be replaced with RPE V8 engine for 2023. season.Honestly looking forward to seeing that.
Oh hell yes!
Where lesser engines run out, the tuned 4A-GE merely begins.
What a little F1 car
Go Mikko Go 🇫🇮🇫🇮🇫🇮🇫🇮
Got a little squirrelly at the end
Amazing car.
The best KP62 ever
eargasmic sound
Tuner what rpm limit do you want ?
The guys : yes
I wonder what VHT could do with the new GR yaris/corolla engine. Those seem to handle 500hp without opening.
Avec le pont flottant à l'arrière c'est incontrôlable.
Need that in Barbados 🇧🇧
It has returned with a slightly different look
# IL PARADISO DELLA FRUTTA!
Spettacolare
Grazie!!
cute headlights mean sound
Oh man, I'd love to swap this toyota for my own boring hybrid toyota! Lovely sound here!:)
Volume o máximo se faz favor 🔥🔥🔥
Sempre!!
I wonder what oil type and viscosity they use
I got a Nissan EV ad before this. LOL!
Sick car, was hoping for cleaner onboard footage tho - no logos or suspension cams
Yeah :D
😍
Kalle Rovanpera is currently messing about in one of these 🤣 to
👍👍👍👍👍
Que paciencia. Yo seguro que estaría preso a los 5 minutos
This a re upload because you did a video on this already? Not that its a problem but if you are looking for content post some off the bloopers and just general videos of hill climb events you went to
This is not a re-upload.
Mph or kph?
Sounds like this guy got a Formula Atlantic 4A-GE
This is Mikko's own design. Built not bought...
11000 об/мин это 💪
Somebody call Takumi Fujiwara!
my first car was a 4age, then went to 20xe and never looked back
I want one
💜❤️💜
now they are swapping the custom 2.7 V6 from Radical Precision Engineering into this thing
Now that will make for a tremendous video too...
great , but i need to fix is line brake !!!!!!!!
How the hell do you get 260Hp out of a 1.6 liter engine
Sky high RPMs, super aggressive cam profiles, ported everything to make it all flow with minimal restriction, and probably plenty of reinforcing with forged/treated parts to keep it from grenading itself... Keep in mind, you could also see that this thing isn't exactly kicking out a whole lot of torque(and you can see that even at higher RPMs, it's not exactly putting a whole lot more power down. I'd reckon that it's probably tapering off on power by 8.5-9k rpm and the extra rpms are more for gearing than for actual power production.
A fuck ton of money that’s how.
@@maqywhaq that’s not even half of it. You’ll need to have your head machines, the cams will be too big, so you’ll need to notch the cylinder head to make sure they clear, new shims, new valve springs, high compression pistons, you’ll need a dry sump system, fully balanced internals and you’ll need to stiffen the bottom end. You’ll have to run BIG ITBs, 48mm+, and that’ll have you right around 260hp at around 11,000 RPM. and you can run even higher if you have a shorter rebuild interval.
@@Hashiriya086 Lol!!!! It's true!!!
@@maqywhaqit has peak power around 10-11k rpm...
Initial-d