Thanks, yeah i was thinking it would be easiest to do something like this as i get quite a lot of questions what has been done to the car. Ended up filming the car and warmup really spontaniously without much planning and realized when editing could have done some things different, but maybe we will do part 2 at some point with even more indepth look on the electronics etc as there is so much more than the quick look in this video... Maybe then i could also explain not just film and write some details on the footage.
This is one of those beautiful things that doesn't happen very often, I've always been curious about the full build on this car and wanted to know the full breakdown. Rather than 2 minute teasing videos on it, a full breakdown. Much is appreciated.
What an awesome machine!! It was great seeing you on Trento Bondone, and especially hearing all those 11000rpm 😄 hopefully we will see you on some more hillclimb races!
Thanks. Was fun again in Trento, too bad we had the brake issues so couldn’t beat my time from 2019. I think I had change for 11:20s at least. We do races regularly, but work takes a lot of weekends this year especially.
This generation of starlet has always been one of my favourite cars. You guys have done something absolutely increddible. Thank you and everyone who worked on it so much for sharing this amazing work with us.
This thing is epic! As someone who is currently building a hatchback Hillclimb car, I can see all the little touches. In particular the wheel position sensors! Nice electronics setup too.
Thx for the sneak peek! I like how you keep it competition ready, not showroom ready, this is no garage queen. I feared the worst for suspension, but was surprised, that high spec performance and yet the chassis is kept so original the suspension could be swapped back to 100% OEM almost overnight. That commands my respect, it speaks volumes about a very thought out, carefully modified, out of the box (in a different sense) suspension setup. A rare feat in a day and age where most people massacre the car until there's nothing other than outer shell resembling an old Toyota, and they won't EVER see the performance this car is putting out.
Thanks, yes this car still somewhat resembles the original Starlet many ways. So not just a tube frame racecar Starlet look a like. Many things are kept true to original car due to regulations, but I think it is also what brings the challenge and joy on the whole thing. When you beat some serious cars with this “old car” you can say yes still has a solid rear axle, yea still has the original McPherson front suspension and yes firewall is intact etc. let’s see what the future brings to this car. Next update is going to be a big one, but I think stays still true to the nature of this car.
@@VHTRacing Don't let me dissuade you from doing whatever you want with the car, even if unoriginal to the car. Saw enough mods to determine it's not getting plates again anyway!
Thanks, but the BBS wheels are already since 2020.. :) We sometimes run old set of tires in practice runs with the old wheels, or intermediate/wet tires with SSR's or Compomotives.. Unfortunately would have been too expensive to order bigger amount of these BBS's with different specs.
Brother runs a Starlet with a 1300 twin cam Suzuki Swift motor fitted with big hair dryer. Has 6 spd Quaife sequential box. Pokes out around 270 ponies at the rear and runs a big ass wing. A quick and effective weapon. Not quite as pretty as this rocket but from 10ft away who would notice.
@@fodenpetersen8992 yep a couple. Look up Import Parts Specialists. Hawkeswood Hill Climb 2021 & Three Mile. The footage is a bit crap but will give u an idea what the car is like. Hawkeswood Road had loose gravel on it which made it dangerous. The cars gearing also limited top speed. Brother has another diff now.
i hope these dont get as popular in the future so i can still wanna get one, because i will probably never be able to get an ae86 and these are just as cool
We had already end of 90's a street Starlet with 4AGE and AE86 T50 and rear axle, brakes etc. Was fun car to drive around, had it as daily driver for several years. And they are already hard to find. In europe they are getting really rare to find at least in good condition. In Finland oll of them have been used in rallying.
It's great. Takes 15mins to change the drop gears on the axle. There are few downside's on these axles, but generally quite happy. Very light especially this 7" version with the magnesium center and all the light options like gun drilled axles and lightened ring gear etc.
Love your work and the car model..... and when its a combo i really fall in love with them. I really love the 4age but i really wish to see the old 5k engine screaming in the future and their specs cause i want to build one to myself.
Very nice car. I have two questions: Did you consider using a 7a block with longer conrods for better rod/stroke ratio? Is there a reason why you mounted the watts link rocker on the diff instead of on the chassis? I am building an AE86 gravel rally car and I'm not sure which is the best way to do the watts link. Thank you.
@@MotoWot I’ve done 7age in the past. For this hillclimb engine wanted to stay true to 4AGE with the original stroke and block height, but had quite long rod already >134mm much longer than usually. Our piston rod combo for this is something quite special. For the wattslink simply the floor is not strong/structural in the middle and there is no space between axle/tank etc. with this typical layout it was easy to have the chassis side brackets in the frame rails that are more sturdy than the floor. There would be of course some “maybe” benefits to have it the other way around (like the fixed location/adjustability).
@@VHTRacing Thanks for your detailed reply. I agree there are some benefits to the chassis mounted rocker, but it won't work very well if I hit something and it gets ripped out of the floor 🤣
@@VHTRacing Sorry about the dumb ass a question. When I started watching your great video on your fantastic build I thought a Starlet was front wheel drive, then got to the bit about the rear end, and saw it was rear wheel drive, thought it an awesome set up with the quick change..... Even after watching it twice .... I still asked the question....( and I was lying in bed this morning thinking that was the dumbest question to ask ) That's what happens when you get old and you start work at 2 AM. I have loads of questions about your build, but as I'm new on here I'll have to go back through your video list and have a cruise about. Here's an interesting video about rear end development ruclips.net/video/pcQTXh9j0t0/видео.html Again I apologise for the question.... Here's another question. Have you done anything with the steering Ackerman. It looks like there's a bit of caster on it.
Only this one. Sold some piston/rod/crank combos around, but none has really been either build complete yet or had the other stuff to support this kind of performance.
Joskus Mikko k.n kans jotain juteltu sun moottorista ja enemmän oot kertonut videoissa. En voi muuta kuin hattua nostaa sinulle. Mahtava nähdä joku oulun poika maailmalla tekemässä hienouksia! T. Kempeleestä!
Kiitos. Koitetaan värkätä. Tuli muuten 20v täyteen tän auton kans siitä kun se ekan kerran oli ralliautona liikkeellä omin voimin. Välillä mietityttää, että voishan sitä rassata jotain muutakin vekotinta, mutta tässä on jo niin paljon historiaa, että hankala vaihtaa enään.
Muistan kyllä. Samoilta seuduilla ollaan. Tuli itselläkin oltua kartturina niihin aikoihin. Tuostahan on hyvä tehdä aina vaan paremmaksi turhaan hommata jotain muuta autoa ja on ollut kyllä mielenkiintoisia videoita. Ja jos ei kaikki rahat mene harrastukseen,niin harrastaa väärää lajia😂
No niinhän se menee, joutus opetteleen uudet jutut kokonaan. Kempeleessä tuli muuten käytyä about kuukausi sitten viimeksi nopeasti kun oltiin Oulussa käymässä. Vaimon puolen mummula on siellä. Mikonkin ”uudella” pajalla Kempeleessä pitänyt käydä, mutta ei joka paikkaan kerkeä. Meillä on lukkoprojektikin ollut sen kans menossa sovittaa mun vanha Cuscon lukko tohon nykyiseen akseliin, mutta pitäs viimeistellä piirustukset vaan materiaali siellä kuulemma odotellut jo vuoden varmaan 😂
What you need to do, is make a road car version, and put it into production, to rival the Porsche Restomod market!!! Still miss my Starlet ... it's the best car in the world!
We've kind of done that already in the past (~2000 we had a street staret with 4AGE and AE86 drivetrain etc) and more recently with the blue 2zz turbo Starlet. Have you seen these cars?
Juma mikä vehjes ja speksimäärällä varusteltu. Onko tuossa ihan vain Boschin DBW mikä teurastettu ja laitettu sen moottori pyörittämään akselia noille rumpuläpille? Huikeata nähdä tämän tason touhuamista.
Tattis, sähkökaasumoottori on ihan tehty tuollaiseksi. Harmi kun nuo ei tullut tuotantoon ja niitä ei saa mistään enään. Tuo on mallikappale minkä onnistuin saamaan. Varakappalettakaan ei ole 😐
No it’s something I made few years ago. We do have a mold so that we could produce them if there is interest as small batches. It however only fits good on the bugeye and would require those matching flares etc
Just eventually got the original Toyota grommets they are the best solution. All more or less generic aftermarket parts are bad, the origina ones work well and last long if not abused.
Just eventually got the original Toyota grommets they are the best solution. All more or less generic aftermarket parts are bad, the origina ones work well and last long if not abused.
Currently the gearbox is in the car since 2016 (Pikes Peak was the first race with the Sadev sequential). It has not been overhauled at all and I will need to do it later this year as 3rd gear is starting to show some engagement issues. I had to slow down the shifts lately. Engine target is one hillclimb season and overhaul every winter. Depends if problems occur.
Sorry if i missed it in this video (theres so much info!) Youre using a block girdle and beefed up bearing caps in the engine correct? What brand are these? Thanks!
I did not mention anything on it in this video, but you can see all internal parts on the full engine rebuild series of this engine i did few years ago. I'm using MRP girdle on this engine with the original caps and ARP studs. I'm not 100% happy with that solution and if i would ever start from scratch again with the 4AGE i would make something different, it's not that it wouldnt be beefy enough, but something to save weight and also lover the oil pan even more would help. Every 100 gram counts on these cars and if you could save a kilo from the engine it would be huge.
@@VHTRacing Thank you so much for the info. The MRP girdle is actually the one that had my eye- So thats quite interesting to hear. However my goal isnt to build a 11-12k RPM beast haha. Also super interesting to know theyre the standard caps!
@@SidewaysGts it was quite a process to get the girdle sit correctly and also to get the main tunnel straight and correct size what i wanted. We needed to machine the block and the caps etc and finally line bore/hone. I would not recommend using such girdle even on some over 200hp builds, like typical rally engines which are not dry sumps and wont spin anyway much over 9000. They do not need it, for a light street engine with some mods definitively not needed.
@@VHTRacing In your experiences do you think the girlde would be necessary / recommenced at all if youre only intending to rev to 9-10k rpms? What kind of machining was necessary to get that girdle in?
@@VHTRacing any chance of a video on that? I started designing one in CAD that could be 3d printed in a high temp filament like cf nylon or something similar.
It might show on some of the engine build series videos we did few years ago on this channel. There is for sure tons of photos of the barrel setup on our Facebook page under the 4age build folder. The barrels and barrel bodies are Aluminium and I also got the trumpets 3D printed in proper filament that can be used for structural automotive parts. Barrel has some important things to consider with the bearings and tolerances. I ended up using a self lubricating coating in the barrel and to get the clearance right was not easy.
256bhp from a 4age, Jesus Christ. Imagine an aw11 built to this level, I wonder if it would be faster if it could still be brought down to the same ~700kgs
Hard to say, in theory the mr2 aw11 should be better platform what comes to weight distribution and center of gravity height. I think you could get them better in the mr2, but also our Starlet is not bad i have put a lot of effort to get the weight distribution better and lower the cg as much as possible. Never driven mr2's myself, been just a passenger on short rides and it feels also quite nice, but might be that depending on the course and type of road these two cars could have their positives and negatives. One of the fastest home built hillclimb cars in europe in my opinion is Manuel Dondi's Fiat X 1/9 it is with a 2l na engine incredible. It is low and wide and has crazy cornering speeds. When i saw that i actually thought could the mr2 be similar if properly built. Search him in RUclips and you will be amazed if you dont know that car already. Anyway i think the car and driver needs to fit also together, even if some car is faster on paper it doesnt mean it will be faster on 17km up to Mt Bondone...
Man I love this car! Thank you Mikko for being so open with showing us all the little details and inspiring
Agree !! This is the best technical walkaround i have ever seen !
Thanks, yeah i was thinking it would be easiest to do something like this as i get quite a lot of questions what has been done to the car. Ended up filming the car and warmup really spontaniously without much planning and realized when editing could have done some things different, but maybe we will do part 2 at some point with even more indepth look on the electronics etc as there is so much more than the quick look in this video... Maybe then i could also explain not just film and write some details on the footage.
Sehr sehr geiles Auto :)
@@kevkay1737 Danke! :)
i probably had a shot of 10.000 downshifting my almost stock 4ag!!!! i know the feeling plus some extra fear. . thanks for the sound ....keep up
This is one of those beautiful things that doesn't happen very often, I've always been curious about the full build on this car and wanted to know the full breakdown. Rather than 2 minute teasing videos on it, a full breakdown. Much is appreciated.
Thanks and very welcome, i thought maybe my video walking around is just boring, but happy to find some people liked it. :)
@@VHTRacing It was well worth the effort. You have done a great job. I appreciate you feeding peoples curiosity with such a unique and cool car.
An absolute masterpiece Mikko - the jewel remains that engine !
Thanks! :)
I daily a 4k KP., Your car is a beautiful machine.
Maximum tune,no boost!
Super N/A!
Congratulations!
A fellow N/A lover!
Mikko, you had a dream and you made it! Congrats and best wishes!
Thanks 😊
Yours is my favorite hillclimb car in the world. Thank you for the tour. Amazing work!
What an awesome machine!! It was great seeing you on Trento Bondone, and especially hearing all those 11000rpm 😄 hopefully we will see you on some more hillclimb races!
Thanks. Was fun again in Trento, too bad we had the brake issues so couldn’t beat my time from 2019. I think I had change for 11:20s at least. We do races regularly, but work takes a lot of weekends this year especially.
This generation of starlet has always been one of my favourite cars. You guys have done something absolutely increddible. Thank you and everyone who worked on it so much for sharing this amazing work with us.
Thanks! 🙂
@@VHTRacing no, thank YOU :P
This thing is epic! As someone who is currently building a hatchback Hillclimb car, I can see all the little touches. In particular the wheel position sensors! Nice electronics setup too.
Thx for the sneak peek!
I like how you keep it competition ready, not showroom ready, this is no garage queen.
I feared the worst for suspension, but was surprised, that high spec performance and yet the chassis is kept so original the suspension could be swapped back to 100% OEM almost overnight.
That commands my respect, it speaks volumes about a very thought out, carefully modified, out of the box (in a different sense) suspension setup.
A rare feat in a day and age where most people massacre the car until there's nothing other than outer shell resembling an old Toyota, and they won't EVER see the performance this car is putting out.
Thanks, yes this car still somewhat resembles the original Starlet many ways. So not just a tube frame racecar Starlet look a like. Many things are kept true to original car due to regulations, but I think it is also what brings the challenge and joy on the whole thing. When you beat some serious cars with this “old car” you can say yes still has a solid rear axle, yea still has the original McPherson front suspension and yes firewall is intact etc. let’s see what the future brings to this car. Next update is going to be a big one, but I think stays still true to the nature of this car.
@@VHTRacing Don't let me dissuade you from doing whatever you want with the car, even if unoriginal to the car.
Saw enough mods to determine it's not getting plates again anyway!
This is car nerd heaven. No shitetalk just cars.
Εξαιρετικό αυτοκίνητο. Είχαμε ανάγκη αυτό το βίντεο. Συγχαρητήρια.
Pffff what a machine! Beautiful
Thanks.
new wheel set up, love it
Thanks, but the BBS wheels are already since 2020.. :) We sometimes run old set of tires in practice runs with the old wheels, or intermediate/wet tires with SSR's or Compomotives.. Unfortunately would have been too expensive to order bigger amount of these BBS's with different specs.
Absolutely beautiful car and engine
Thanks!
Just can’t get enough of this car, so want to build my own 4age 16v monster 😍😍😍
4AGE the little underdog engine.
@@VHTRacing awesome bro must say
Brother runs a Starlet with a 1300 twin cam Suzuki Swift motor fitted with big hair dryer. Has 6 spd Quaife sequential box. Pokes out around 270 ponies at the rear and runs a big ass wing. A quick and effective weapon.
Not quite as pretty as this rocket but from 10ft away who would notice.
Got any videos on RUclips?
@@fodenpetersen8992 yep a couple. Look up Import Parts Specialists. Hawkeswood Hill Climb 2021 & Three Mile. The footage is a bit crap but will give u an idea what the car is like. Hawkeswood Road had loose gravel on it which made it dangerous. The cars gearing also limited top speed. Brother has another diff now.
Che spettacolo , complimeti !!!
Mulțumesc pentru prezentare
Felicitări pentru mașină
Congrats on a fantastic machine!
Thanks.
awesome car brilliantly done. So good to watch, thank you Mikko!!
as an owner of a kp61 and a fx16 this makes me want to move the motor over- wow
Bonjour un Grand Merci pour cette Magnifique Vidéo Merci cordialement JNM
全てが完璧に見えます
ありがとう
MANY THANKS FOR SHARING THIS VIDEO.......
i hope these dont get as popular in the future so i can still wanna get one, because i will probably never be able to get an ae86 and these are just as cool
the locals at my place take 86’s parts and install em into their starlet 🤘🏼
@@musky420 yea i see a lot of people do an axle swap and i think the 4age fits the starlet really well
We had already end of 90's a street Starlet with 4AGE and AE86 T50 and rear axle, brakes etc. Was fun car to drive around, had it as daily driver for several years. And they are already hard to find. In europe they are getting really rare to find at least in good condition. In Finland oll of them have been used in rallying.
@@VHTRacing yeah it sucks these great cars are getting so rare. guess i will have to import one from japan
your TOYOTA is realy fantastic !!!!!!!!!!!!!!!!!!!!!!!
Awesome machine, thanks for sharing
Thanks.
this car is awesome, I would love to put a mini quick change in my Opel GT
It's great. Takes 15mins to change the drop gears on the axle. There are few downside's on these axles, but generally quite happy. Very light especially this 7" version with the magnesium center and all the light options like gun drilled axles and lightened ring gear etc.
Hats off 👍
Thanks.
Cool car. I hope I see it in osnarück this year.👍👍👍
Μπράβο👍 my friend ... I watch it since 5k !
🙂
Hyvä Mikko! Ei voi kun ihastella.. näytä niille miten vanhaa toyotaa prkl viedään 👍
Kiitos, yritetään! 🙂
Truly magnificient hi quality engineering sir..
Thank you 😊
11k rpm with non 20valve 4age Mikko olet hullu, kiitos että näytit speksejä
Good job !! 👍
Great Video, thanks 👍👍👍
Thank you too!
Unglaublich viel Arbeit! Klasse Auto, klasse Fahrer+Engineering…🤩 …hoffentlich hält die Hinterachse! (Hockenheim/April 22 ⚙️🔧👍). LG an die Frau!
Danke. Ja lauft gut momentan 👍
absolute amazing car and fantastik driver💪👌
Thank you ☺️
Just beautiful 😍😍😍🙏🙏🙏🙏
Love your work and the car model..... and when its a combo i really fall in love with them.
I really love the 4age but i really wish to see the old 5k engine screaming in the future and their specs cause i want to build one to myself.
161ps per liter.11000 rpm limiter. Impressive.
It is amazing, took quite an abuse again last weekend in Trento. Had no more temperature issues which was great.
superb.
OMG love it
which kind of transmission is fitted on this Special Starlet? Dog mission produced by "Holinger" ?
Very nice car. I have two questions: Did you consider using a 7a block with longer conrods for better rod/stroke ratio? Is there a reason why you mounted the watts link rocker on the diff instead of on the chassis? I am building an AE86 gravel rally car and I'm not sure which is the best way to do the watts link. Thank you.
@@MotoWot I’ve done 7age in the past. For this hillclimb engine wanted to stay true to 4AGE with the original stroke and block height, but had quite long rod already >134mm much longer than usually. Our piston rod combo for this is something quite special. For the wattslink simply the floor is not strong/structural in the middle and there is no space between axle/tank etc. with this typical layout it was easy to have the chassis side brackets in the frame rails that are more sturdy than the floor. There would be of course some “maybe” benefits to have it the other way around (like the fixed location/adjustability).
@@VHTRacing Thanks for your detailed reply. I agree there are some benefits to the chassis mounted rocker, but it won't work very well if I hit something and it gets ripped out of the floor 🤣
すごくかっこよく キレイにまとめて作られてますね cool !
It's good to see people still investing time and knowledge in reasons of passion...What's the torque steer like?
Thanks. Torque steer? It’s rear wheel drive, there is some snap oversteer if you turn the TC down and not be careful on the pedal.. 😄
@@VHTRacing Sorry about the dumb ass a question. When I started watching your great video on your fantastic build I thought a Starlet was front wheel drive, then got to the bit about the rear end, and saw it was rear wheel drive, thought it an awesome set up with the quick change..... Even after watching it twice .... I still asked the question....( and I was lying in bed this morning thinking that was the dumbest question to ask ) That's what happens when you get old and you start work at 2 AM. I have loads of questions about your build, but as I'm new on here I'll have to go back through your video list and have a cruise about.
Here's an interesting video about rear end development ruclips.net/video/pcQTXh9j0t0/видео.html
Again I apologise for the question....
Here's another question. Have you done anything with the steering Ackerman. It looks like there's a bit of caster on it.
so, since 5 Y ago, how many Starlets you already "convert" to a screaming 11.000 rpm 4-age?🤩
Only this one. Sold some piston/rod/crank combos around, but none has really been either build complete yet or had the other stuff to support this kind of performance.
Kyllä on hienosti rakennettu! Onko tulossa lisää jotain muutoksia?
Kiitos. Vähän se polttelis isompaa moottoria ens vuodelle..
Joskus Mikko k.n kans jotain juteltu sun moottorista ja enemmän oot kertonut videoissa. En voi muuta kuin hattua nostaa sinulle. Mahtava nähdä joku oulun poika maailmalla tekemässä hienouksia! T. Kempeleestä!
Kiitos. Koitetaan värkätä. Tuli muuten 20v täyteen tän auton kans siitä kun se ekan kerran oli ralliautona liikkeellä omin voimin. Välillä mietityttää, että voishan sitä rassata jotain muutakin vekotinta, mutta tässä on jo niin paljon historiaa, että hankala vaihtaa enään.
Muistan kyllä. Samoilta seuduilla ollaan. Tuli itselläkin oltua kartturina niihin aikoihin. Tuostahan on hyvä tehdä aina vaan paremmaksi turhaan hommata jotain muuta autoa ja on ollut kyllä mielenkiintoisia videoita. Ja jos ei kaikki rahat mene harrastukseen,niin harrastaa väärää lajia😂
No niinhän se menee, joutus opetteleen uudet jutut kokonaan. Kempeleessä tuli muuten käytyä about kuukausi sitten viimeksi nopeasti kun oltiin Oulussa käymässä. Vaimon puolen mummula on siellä. Mikonkin ”uudella” pajalla Kempeleessä pitänyt käydä, mutta ei joka paikkaan kerkeä. Meillä on lukkoprojektikin ollut sen kans menossa sovittaa mun vanha Cuscon lukko tohon nykyiseen akseliin, mutta pitäs viimeistellä piirustukset vaan materiaali siellä kuulemma odotellut jo vuoden varmaan 😂
Awesome cool
Sora alustaa seuraavaks alle ja vetomiehiin💪😎
Tarvis muutama muukin juttu muuttaa, mutta vetomies on listalla vielä joskus (jollain muulla vehkeellä) 😄
What you need to do, is make a road car version, and put it into production, to rival the Porsche Restomod market!!!
Still miss my Starlet ... it's the best car in the world!
We've kind of done that already in the past (~2000 we had a street staret with 4AGE and AE86 drivetrain etc) and more recently with the blue 2zz turbo Starlet. Have you seen these cars?
@@VHTRacing I’ve seen the blue 2zz. Are donor cars attainable over there? Extremely rare in Canada unfortunately.
Juma mikä vehjes ja speksimäärällä varusteltu. Onko tuossa ihan vain Boschin DBW mikä teurastettu ja laitettu sen moottori pyörittämään akselia noille rumpuläpille? Huikeata nähdä tämän tason touhuamista.
Tattis, sähkökaasumoottori on ihan tehty tuollaiseksi. Harmi kun nuo ei tullut tuotantoon ja niitä ei saa mistään enään. Tuo on mallikappale minkä onnistuin saamaan. Varakappalettakaan ei ole 😐
👍👍👍TOYOTA the Best👍👍👍
Mikko is the front body piece something sold on the open market?
No it’s something I made few years ago. We do have a mold so that we could produce them if there is interest as small batches. It however only fits good on the bugeye and would require those matching flares etc
@VHTRacing Did you do anything to eliminate the valve cover grommets? Or did you use the normal grommets for the valve cover nuts?
Just eventually got the original Toyota grommets they are the best solution. All more or less generic aftermarket parts are bad, the origina ones work well and last long if not abused.
Just eventually got the original Toyota grommets they are the best solution. All more or less generic aftermarket parts are bad, the origina ones work well and last long if not abused.
@@VHTRacing I forgot to ask, how many races do you get out of your engine and transmission before needing a rebuild?
Currently the gearbox is in the car since 2016 (Pikes Peak was the first race with the Sadev sequential). It has not been overhauled at all and I will need to do it later this year as 3rd gear is starting to show some engagement issues. I had to slow down the shifts lately. Engine target is one hillclimb season and overhaul every winter. Depends if problems occur.
I did not know porn was allowed on RUclips :) what a great car, well built in all aspects!
haha, thanks! :)
I love your Starlet, but how much does your 4AGE scream 😍
It screams from the intake entry to the bottom of it’s stroke for all the 77 millimeters and to the end of the 3” exhaust 367 times per second.
And all that with 125% effort.
Did you guys stack two sets of roll center adjusters?
yes, but so that they are "locked" from the inside of course for stability.
J aimerait tellement avoir ce modèle que j ai toujours adorer en 3 portes cher mitsubichie y avait la colt aussi pareille j adore cette caisse ❤ 😂
🖤
How much money have you invested in that rocket? Looks nice
Thanks, these are the questions you don’t ask 😂
😍
I dream of my kp starlet race car I'm building to be like this but funds are low so I'm just doing what I can
This car started also with very small budget. I would have never been able to build it like this at once. It is development over 20 years.
Are the primary measurements outside or inside diameter? is it because stepped?
OD and yes two different sizes makes it stepped!? 🙃
Sorry if i missed it in this video (theres so much info!)
Youre using a block girdle and beefed up bearing caps in the engine correct? What brand are these? Thanks!
I did not mention anything on it in this video, but you can see all internal parts on the full engine rebuild series of this engine i did few years ago. I'm using MRP girdle on this engine with the original caps and ARP studs. I'm not 100% happy with that solution and if i would ever start from scratch again with the 4AGE i would make something different, it's not that it wouldnt be beefy enough, but something to save weight and also lover the oil pan even more would help. Every 100 gram counts on these cars and if you could save a kilo from the engine it would be huge.
@@VHTRacing Thank you so much for the info. The MRP girdle is actually the one that had my eye- So thats quite interesting to hear.
However my goal isnt to build a 11-12k RPM beast haha.
Also super interesting to know theyre the standard caps!
@@SidewaysGts it was quite a process to get the girdle sit correctly and also to get the main tunnel straight and correct size what i wanted. We needed to machine the block and the caps etc and finally line bore/hone. I would not recommend using such girdle even on some over 200hp builds, like typical rally engines which are not dry sumps and wont spin anyway much over 9000. They do not need it, for a light street engine with some mods definitively not needed.
@@VHTRacing In your experiences do you think the girlde would be necessary / recommenced at all if youre only intending to rev to 9-10k rpms? What kind of machining was necessary to get that girdle in?
Das ist eine feine starlette neuester technik. Aber alter schule
Danke, ja alt und neue gemischt :)
Wow.
🚀🚀🚀🏁🏁🏁
I was just thinking about barrel throttle bodies for my AW11, where'd you get those? Or did you make them?
Our own design. I once calculated it would cost around 4000€ to make similar package and that doesn’t include the carbon plenum.
@@VHTRacing any chance of a video on that? I started designing one in CAD that could be 3d printed in a high temp filament like cf nylon or something similar.
It might show on some of the engine build series videos we did few years ago on this channel. There is for sure tons of photos of the barrel setup on our Facebook page under the 4age build folder. The barrels and barrel bodies are Aluminium and I also got the trumpets 3D printed in proper filament that can be used for structural automotive parts. Barrel has some important things to consider with the bearings and tolerances. I ended up using a self lubricating coating in the barrel and to get the clearance right was not easy.
Did it cost much to build this
Or was it all home built
Yes and yes
May I ask what crankshaft you are using?
Moldex crankshaft made in Michigan US.
@@VHTRacing Thank you. Might check them out for my 7age
かっこいい！
these coil pack are weak ?
Only if you use them wrong.
Old school
With modern twist. 👍
😍🥰🤩
Which version of the 4age is it?
Is this a general question or more detailed which of our developed tunes versions it is? 😊
@@VHTRacing More like which generation of the 4age is it. Bluetop, redtop?
@@sirsomebody1453 block is 20v blacktop and head is 16v early blue top. Pretty much nothing else is original.
256bhp from a 4age, Jesus Christ. Imagine an aw11 built to this level, I wonder if it would be faster if it could still be brought down to the same ~700kgs
Hard to say, in theory the mr2 aw11 should be better platform what comes to weight distribution and center of gravity height. I think you could get them better in the mr2, but also our Starlet is not bad i have put a lot of effort to get the weight distribution better and lower the cg as much as possible. Never driven mr2's myself, been just a passenger on short rides and it feels also quite nice, but might be that depending on the course and type of road these two cars could have their positives and negatives. One of the fastest home built hillclimb cars in europe in my opinion is Manuel Dondi's Fiat X 1/9 it is with a 2l na engine incredible. It is low and wide and has crazy cornering speeds. When i saw that i actually thought could the mr2 be similar if properly built. Search him in RUclips and you will be amazed if you dont know that car already. Anyway i think the car and driver needs to fit also together, even if some car is faster on paper it doesnt mean it will be faster on 17km up to Mt Bondone...
Why didn't you go with 20v head
Don’t think it would be better.
its a beuty😅😅😅
La même caisse que talbot lotus non je pense à ça mais non 😂
Danke 👍👍👍👍👍👍💪💪💪💪💪💪