Hi . Were to buy the harness that look easy to work on it I litter big of that place We're to buy it . The video making easy whit the explanation . Thanz
Hi there you really manufacture a very nice harness i would like to come in contact with you or your website . gen v ls1 6.2 corvette motor with a 8l90e ,
So if my harness has the black o2 sensors connect on the passenger side. I put 12666673 on the passenger and driver side or is it 2 different o2 sensors? My passenger is black and driver side is grey
Can u help me get a harness for my swap I got a 95 Chevy short bed single cab that I want to install a 2001 5.3 motor, trans I got everything of the 2001
Hi, thanks for sharing. Where do I get the tachometer RPM signal from? From which connector, I have an L83 with a TH400 transmission.. Which fuel pressure regulator do you recommend?
Hi, my name is Willy and I would like to see if you can make a harness for a LT4 swap. I was looking for a phone number to get a hold of you and I could not find it.
What front end accessories would you recommend for a 2000 S10 ? 5.3 and 4L60e out of a 2004 Silverado dbw . Camaro accessories or Corvette accessories. The pros and cons of both.
I like your videos you make it look easy. Im planing on doing 1976 C3 resto-mode. 2015 Sierra 5.3L with a C6 rear suspension. Very nervous need a harness.
2020 5.3 with 8l90 im interested in get a stock harness reworked to put the engine in my c10 can you contact me with a price & info for me to ship it all to you
you prolly dont give a shit but does any of you know a way to log back into an instagram account? I was stupid forgot my password. I appreciate any assistance you can offer me!
@Graham Bodie I really appreciate your reply. I got to the site thru google and I'm in the hacking process atm. Seems to take a while so I will get back to you later with my results.
On the fuel pump section, you have the fuel module (GM part) and the fuel pressure sensor,,,, what is the part number for that fuel pressure sensor, and is it a GM part??? Thanks Mark
What about tuning the ecm and tcm. Just want it run and drive no performance adds looking at a 2019 pull out. 5.3 / 8L80e can you unlock those (remove vats ) I have hp tuner. Is it doable with there software ?
Hi . Were to buy the harness that look easy to work on it I litter big of that place We're to buy it . The video making easy whit the explanation . Thanz
How would I go about purchasing this set up?
Got a l83 engine and transmission and I’m trying out it on my 88 xj jeep I need a harness
Can you make the truck harness for 95 obs chevy
Hi there you really manufacture a very nice harness i would like to come in contact with you or your website . gen v ls1 6.2 corvette motor with a 8l90e ,
BEAUTIFUL
Installing my L86 harness today. Beautiful work! Artistic in its execution!
So if my harness has the black o2 sensors connect on the passenger side. I put 12666673 on the passenger and driver side or is it 2 different o2 sensors? My passenger is black and driver side is grey
I can do this same thing on an 99 fbody?
Can u help me get a harness for my swap I got a 95 Chevy short bed single cab that I want to install a 2001 5.3 motor, trans I got everything of the 2001
Got l83 going in f100 how much for harness and ecm can they be set up for 4l60e
How can I get in touch with you for the service?
On the gen5 how do you tap in for the ac compressor
Nice rework. This harness worked out great for me.
Hi, thanks for sharing.
Where do I get the tachometer RPM signal from?
From which connector,
I have an L83 with a TH400 transmission..
Which fuel pressure regulator do you recommend?
Hi, my name is Willy and I would like to see if you can make a harness for a LT4 swap. I was looking for a phone number to get a hold of you and I could not find it.
What front end accessories would you recommend for a 2000 S10 ? 5.3 and 4L60e out of a 2004 Silverado dbw . Camaro accessories or Corvette accessories. The pros and cons of both.
Necesito un arness para un 6.2 l86, transmicion 8L90 4wD para hacer swap en blazer 1990 donde lo puedo consegir
Lo conseguiste??
Do you sell a wiring harness for a gene 5.3 that will work with a 1968 C10
*Gen V
I need one just like this how do I order it
I like your videos you make it look easy. Im planing on doing 1976 C3 resto-mode. 2015 Sierra 5.3L with a C6 rear suspension. Very nervous need a harness.
That’s some beautiful work right there.
I been trying to get hold of u for a wile I need a harnesses done for a 71 c10 l83 5.3
Could this work on my 72 cutlas I’m using the same engine and 8 speed transmission ? How can I get this from you?
Cool looks great, hope this one is mine 😂 can’t wait for that UPS truck, I’m like my kids on Christmas Eve.....
Planning swapping a l83 in my 94 4thgen camaro with t56
I need help planning on putting a l86 6.2 into a 1971 c10 wat else is needed ? Will this harness work?
Do you man a harness for a 89 Chevy obs?
Algún número para comunicarme quiero inf
Website or how can I order one
I have a l83/8l90 setup…any control options for that?
2020 5.3 with 8l90 im interested in get a stock harness reworked to put the engine in my c10 can you contact me with a price & info for me to ship it all to you
Can you tell me where to order this. What website?
nice! well done.. with a standalone harness I'm I able to wire it up to anu vehicle to run their own gauges? mph.. oil pressure.. coolant temp etc
you prolly dont give a shit but does any of you know a way to log back into an instagram account?
I was stupid forgot my password. I appreciate any assistance you can offer me!
@Franklin Kyle instablaster :)
@Graham Bodie I really appreciate your reply. I got to the site thru google and I'm in the hacking process atm.
Seems to take a while so I will get back to you later with my results.
@Graham Bodie It worked and I finally got access to my account again. I'm so happy!
Thanks so much you really help me out !
@Franklin Kyle No problem :D
How can I get a PWM harness set up?
On the fuel pump section, you have the fuel module (GM part) and the fuel pressure sensor,,,, what is the part number for that fuel pressure sensor, and is it a GM part???
Thanks
Mark
I bought, 13579380 GM Fuel Pressure Sensor.
Question. What is a typical oil pressure on a 6.2 gen iv truck motor warmed up? Thank you.
I have an 2015 L83 but no harness or ecu...whats best route to get those items? Keep up good work too!
You can either get a used harness or get new from me. Just depends on your budget
@@swaptimeusa ok where can I order new from you
@@swaptimeusa Please, Need one too.
How's much for you to convert a harness? Manual trans.
Can I have your website so I can order a harness. Thanks
I need some info on a swap for my 1999 and 2000 s10 xtreme. The l83 would be for the 1999 and the l86 for the 2000. How can you help!
It will be a extremely tight fit. Besides the fit it should be the same install as a LS engine
What kind of harness conversion cost? I may be getting a 6.0/6l90. Need to convert to 2wd though.
Do you one for sale?
Price for one like shown ?
550$
What about tuning the ecm and tcm. Just want it run and drive no performance adds looking at a 2019 pull out. 5.3 / 8L80e can you unlock those (remove vats ) I have hp tuner. Is it doable with there software ?
@@locrewcustoms3490 Since you have hptuners you can use it yourself to program with my help.
I look forward to
Getting mine. Just waiting on a text back bro.
@@swaptimeusa @ how much would it be a harness for a 2010 gen 4 4.8 with 60e transmission????
Im suprised no one hs come up with a way to run stock gauges yet..
Hey man show your phone num..
Email address
I need you number I'm swapping a oBS Chevy with a 6.2 2020 I need help