Giraffe Tools Grandfalls Pressure Washer Pro & Plus+ | New Replaceable Hose! | Car Wash Tips

Поделиться
HTML-код

Комментарии • 88

  • @CarsWithKeav
    @CarsWithKeav  Год назад +5

    They have fixed the Firework whistle sound which is a big improvement. They have also assured me that all old inventory has been taken off the market and only the new PRO version without that annoying noise will be what you order. They worked quick to resolve this for you after seeing my video and getting my feedback. I have a video they sent me that will will show in an update video soon.

    • @bikemancody2752
      @bikemancody2752 Год назад +1

      Thank God!! I ordered one today and just noticed the Lteradactyl screech.

    • @mike18421
      @mike18421 Год назад +1

      I hope so as I just ordered the Pro yesterday. I also ordered the upgrades you mentioned in your video! Thanks for the review!

    • @petermerrill04
      @petermerrill04 Год назад +1

      I ordered mine and bad news… the screech is still there. I mentioned this review and sent them a video. They told me it was normal. 🤦🏻‍♂️

    • @mike18421
      @mike18421 Год назад +1

      I also received my Pro the other day and installed it in my basement and NO Screech!! Completely quiet after ramp up. Washed 2 of my vehicles and no noise. Having said that the pressure is ridiculously low. It is super convenient though and I like the McKillans Short Pressure Washer Gun and quick disconnects that Cars with Keav recommended.

    • @choppedupfitness2375
      @choppedupfitness2375 Год назад +1

      Great review - I was definitely not going to buy it with that annoying firework whistle…now I’m interested again. Sick BMW btw!

  • @TheDailyDriven
    @TheDailyDriven Год назад +5

    The pressure washer makes noise that I would hear in the zoo. Lol. Super glad I went with the Active 2.0. Solid review

    • @CarsWithKeav
      @CarsWithKeav  Год назад +2

      Noise is quite loud. Might have to Frankenstein me a Franken Washer 9000. 😂

  • @ShrugMedia
    @ShrugMedia Год назад +1

    Always learn something new from your review videos. One day when I get my house I’m going to have the best wash set up possible lol

    • @CarsWithKeav
      @CarsWithKeav  Год назад

      When you do you know you can hit me up for help.

  • @highflysugar
    @highflysugar Год назад +3

    Ha. Love the videos!! I was sold until the pressure release screech.

    • @CarsWithKeav
      @CarsWithKeav  Год назад +1

      I was sold reviewing it until then, but their Plus + model has the motor with less screech, but has the good hose. I tested almost a year ago and it hit better GPM than this pro one.

    • @annagraham6204
      @annagraham6204 Год назад +2

      I wonder if that’s across the board they all do that? I couldn’t imagine a company being ok with that! I’d end up taking a shotgun to it;)

    • @CarsWithKeav
      @CarsWithKeav  Год назад +2

      @@annagraham6204 The other 3 models do not have a screech only the Pro with the induction motor does. I let them know when they asked my opinion on the device and I asked them back why did nobody point out that annoying noise when this was being developed. I never would have let that make it to production. They have added me to their opinion maker group hopefully some of my ideas and critiques can help them. This unit is only a screech away from being really good.

  • @diydetailofficial
    @diydetailofficial Год назад +1

    Love your videos brother! Always learning something from you

    • @CarsWithKeav
      @CarsWithKeav  Год назад +1

      Appreciate that. Learn from you guys a lot too. Quick beads was so good I used it on 3 cars in one day and ran out before I could film a video. Decided to support you guys and bought a good bit and will film a whole car wash using your products. Really interested in the magnetic microfibers and using iron remover on wheels with All clean on the tires.

    • @cfwebdeveloper
      @cfwebdeveloper Год назад

      Glad to see DIY Detail stopped by

    • @diydetailofficial
      @diydetailofficial Год назад

      @@CarsWithKeav thank you, yes DIY Detail Quick Beads is addictive, that said if you used a bottle on 3 cars, it’s safe to say you used way too much on those cars.

    • @diydetailofficial
      @diydetailofficial Год назад

      @@CarsWithKeav thank you, yes DIY Detail Quick Beads is addictive, that said if you used a bottle on 3 cars, it’s safe to say you used way too much on those cars.

    • @diydetailofficial
      @diydetailofficial Год назад +1

      @@cfwebdeveloper thanks!

  • @hermanjlyons
    @hermanjlyons Год назад +3

    Excellent review. Do you know if the plus + makes that annoying sound too?

    • @CarsWithKeav
      @CarsWithKeav  Год назад +2

      It does not make that whistle sound. Check this video out as it shows you the sound it will make. ruclips.net/video/zzdegq9-3lU/видео.html

  • @jayo7866
    @jayo7866 6 месяцев назад +2

    Great video! Does the silver flex water hose on the left of unit come with the plus +

    • @CarsWithKeav
      @CarsWithKeav  6 месяцев назад +1

      No it does not only the Black rubber hose comes with it. I used that silver one to get the hose to the ground where I can connect it to my outside hose.

  • @Godfather44055
    @Godfather44055 6 месяцев назад +2

    They just released an Upgraded Pro version that comes with 3300 Psi motor for $699

    • @CarsWithKeav
      @CarsWithKeav  6 месяцев назад

      The original PRO was not worth it in my opinion. It didn’t perform anywhere near the price. Maybe they fixed the issues because in that price range there are some exceptional machines.

    • @Godfather44055
      @Godfather44055 6 месяцев назад +1

      ​@CarsWithKeav what other ones do you recommend. I'm in the market for one and was ready to pull the plug on this one

    • @CarsWithKeav
      @CarsWithKeav  6 месяцев назад +1

      @@Godfather44055 Really depends on what you are looking for and how much work you want to do. If doing things around the house this might be what you need. I myself would build my own setup with a separate reel and hose with an active 2.0. I could have a full professional setup for $700. That would be for washing cars only though.

  • @mingoreyes1
    @mingoreyes1 Год назад +2

    It great if they may this for mobile detailing.

    • @CarsWithKeav
      @CarsWithKeav  Год назад +2

      I think it could be used for mobile detailing, but one thing I don't know is if it self primes and if gravity feed was enough. I can't comment on how well it would hold up to constant running all day though.

  • @LYTS0UT
    @LYTS0UT Год назад +1

    Quick question: can you use it as a regular garden hose (ie, without the motor turned on) or does it require the motor being on to get any flow? Would be nice to be able to fill a bucket or water plants or whatever without pressure. Also, I love how you did your hair to match the rolled-up hose on the reel. That's some serious commitment! 😂
    J/k, bro. Great video. I'm gonna get the Plus+ thanks to this! Beautiful F30 btw 👍

    • @CarsWithKeav
      @CarsWithKeav  Год назад +2

      Yes, you can run without the pressure washer on and I myself do that to fill buckets or foam cannons. It will not be as much flow as a garden hose, but it does the job and lets you have just one hose for everything. Everything has to match. LOL

  • @Lasani1121
    @Lasani1121 Год назад +1

    Hi. Thank you for this thorough review. I actually ordered your exact setup because of this video. I ordered the grandfalls pro pressure washer, the foam canon and spray gun. I have a question for you. Can you provide the measurement of the grandfalls pro unit. I am not able to make out the width, depth and height. Width: (left to right), Height and depth (front to back).

    • @CarsWithKeav
      @CarsWithKeav  Год назад

      I did my best to measure as it’s a very curvy unit. 20.5 inches tall, 14 inches deep and 19 inches wide.

    • @Lasani1121
      @Lasani1121 Год назад +1

      Thank you. That is all I needed to know. I built a backing board for my setup so I wanted to make sure the measurements of the unit will allow for it to fit along with other items I am mounting on the backing board

    • @CarsWithKeav
      @CarsWithKeav  Год назад

      @@Lasani1121 Awesome

  • @DeplorableTexan
    @DeplorableTexan Год назад +1

    Im building a house. I'd like to have power and water at the point in garage I mount the Pressure washer at. Should I just get a spigot in the garage near mounting location or something else like a washing machine hook up?

    • @CarsWithKeav
      @CarsWithKeav  Год назад

      I would go spigot personally. Just east to do bucket fills if needed. Usually washer hookups are recesses int the wall.

  • @HarmlessP0TAT0
    @HarmlessP0TAT0 Год назад +1

    When you added the fitting to make the gun shorter….are u still able to use the long wand ?

    • @CarsWithKeav
      @CarsWithKeav  Год назад +1

      Yes, you would just remove the adapter and use the wand as normal.

  • @paul9387
    @paul9387 Год назад +1

    Kaev, I'm so confused about these quick connects. Trying to add them wherever possible before first use. One guy on RUclips said that gun hose connection he's using M15 quick connect. I went to his description to check what it is it actually was M22 15mm, I think that's what he ment. But you're using M22 14mm, both to ¼ and ⅜. Can I use either or? Dudes are watching chicks, cars, party all night long and I'm just trying to learn about fittings for past few days 🙈

    • @CarsWithKeav
      @CarsWithKeav  Год назад +1

      The giraffe tools hose at least on the three units I have gotten are 14mm and I always use 3/8 connection plug. You can’t use a 15mm on a 14mm connection or it will leak. The opposite a 14mm will not fit or thread onto a 15mm connection. Maybe that guy replaced the hose? Even then most all aftermarket hoses are 14mm and using adapters to convert to 15mm. Best thing about 14mm is if in a pinch you can get those at Home Depot. This for example www.homedepot.com/p/Powercare-3-8-in-Female-Quick-Connect-x-Male-M22-Connector-for-Pressure-Washer-AP31041B/100664033

    • @paul9387
      @paul9387 Год назад +1

      @Cars With Keav great! So do you try to stick with 14mm ⅜ on your all devices? Or lats put it this way, is 14mm ⅜ a standard on all let's say high end equipment?

    • @CarsWithKeav
      @CarsWithKeav  Год назад

      @@paul9387 14mm isn’t really a standard just the most popular at the big box stores. There are a few companies that use 15mm such as Active, AR Blue, Stanley and Sun Joe. I doesn’t matter to me I keep enough fittings and adapters of both sizes around. Active actually ships an adapter to go from 15 to 14 to help consumers out. On my setup the Greenworks is 14 and my Active is 15.

  • @jadoctor
    @jadoctor Год назад +2

    PRO VS the PLUS + ? Is it just the motor?

    • @CarsWithKeav
      @CarsWithKeav  Год назад +2

      Motor mostly which in my testing does less flow, but is less noise overall. Except that fireworks sound at the end. The only other difference is the PRO has a more robust and higher quality spring in the reel assembly. It lasts more than 2x the Plus+ version. They had to upgrade that to match the length of time the motor is good for. if I had to buy myself I would get the Plus+

  • @futbol1972
    @futbol1972 Год назад +1

    I bought a portable pressure washer but thinking about taking it back to buy this. Would u recomend this? Do I need an air compressor to make it work or just hook the water hose to it? Will this replace a pressure washer?

    • @CarsWithKeav
      @CarsWithKeav  Год назад

      This is an all in one unit. All you need to do is supply power and water. I personally don’t recommend the pro model as it’s too expensive, but their plus+ model has the good hose and does a good job. Plus it’s half the price almost of the pro. Portable pressure was has its benefits as well due to it being portable. Will never perform like this unit though. I think it all comes down to what you will be using it for.

  • @vanessaziobro1118
    @vanessaziobro1118 Год назад +1

    What is the max temp the water coming in to the pressure washer can be

    • @CarsWithKeav
      @CarsWithKeav  Год назад

      They show 104 degrees Fahrenheit as the max inlet water temp. So it’s for sure a cold water machine.

  • @Yerevan301
    @Yerevan301 Год назад +1

    Are you aware if they sell an upgrade kit ? If we have the older/standard version , I’d the newer hose and guide with ball bearings can be bought to upgrade ?

    • @CarsWithKeav
      @CarsWithKeav  Год назад

      The redesigned a good bit internally as well. They don’t sell one, but reach out to their customer service and see.

  • @dcbowlin
    @dcbowlin Год назад +2

    Hey Keav, I'd love to know the true dimensions of these units... would you be willing to tape measure it? thinking about it for my detailing van. Thanks!!

    • @CarsWithKeav
      @CarsWithKeav  Год назад +2

      I would say go with 21x21x15, but that is rounding up and that is a conservative measurement. Its closer to 20x20x14, but I rounded up an inch because this is so curvy and oblong its hard to measure.

    • @LYTS0UT
      @LYTS0UT Год назад +1

      @@CarsWithKeav This helped a ton, too. Thanks! Amazon lists the height as 34" but now I realize that's with the gun/nozzle mounted to the back.

    • @CarsWithKeav
      @CarsWithKeav  Год назад +1

      @@LYTS0UT I think they didn't post it right. They say 34 inches from the ground is the best mounting point for the reel to retract its best, but that is mainly for the base model. The ones with the upgraded hose have a better reel guide that lets you do any angle. As long as the hose is being held at the same height as the reel it will retract the same on the base model.

  • @Zack0944
    @Zack0944 Год назад +1

    nice bbs wheels

  • @adambarb3899
    @adambarb3899 8 месяцев назад +1

    Do you still recommend the MJJC Pro 2 Foam Cannon OR its upgrade V3.0 ?

    • @CarsWithKeav
      @CarsWithKeav  8 месяцев назад +1

      Both are amazing and it just depends on your style. The clear bottle and easy too is my pick and why I use the S V3 more. The Pro V2 is the better choice for a detailer doing high volume cars as the bottle and cap is more durable. I did a review on the S V3 recently. ruclips.net/video/kQlB5qEI_5E/видео.htmlsi=Dp7A2GFQ0DX6QX_B

    • @adambarb3899
      @adambarb3899 8 месяцев назад

      @@CarsWithKeav thanks so much for your response!!!

  • @eliteaviators
    @eliteaviators Год назад +1

    Fantastic video

  • @tylerfj24
    @tylerfj24 Год назад +1

    if they would sell a 50 foot hose the psi and gpm may improve

    • @CarsWithKeav
      @CarsWithKeav  Год назад

      You can convert this to 50ft., but I have something coming from them that might just be what you are looking for. Will know more soon and video to come.

  • @nicksulak
    @nicksulak Год назад +1

    Do you recommend the plus plus or the active 2.0? I know that I would have to purchase a reel and stuff in addition to the active 2.0. Just wasn’t sure if the “value or total package” for the added expense would be worth it. Just wash cars at the house nothing crazy. Just tired of pulling out the bigger pressure washer to wash one car.

    • @CarsWithKeav
      @CarsWithKeav  Год назад

      The Plus+ is only $20 more than the 2.0, but the 2.0 is way better performance. If you want the all in one unit that’s easy to use the I would go plus+. If you want superior performance and the ability to pick your own hose and reel the. 2.0. Just know a good reel and hose with the 2.0 is going to be close to $500.

    • @nicksulak
      @nicksulak Год назад

      Sweet, yeah definitely going with the active 2.0 then. I saw Adam’s had a kit you could add on that gave you a 60 foot hose. I also saw OG had a kit with reel and 100 foot hose but it was $1,300. Do you have a recommendation on hose and reel for at least 50 feet, that the active 2.0 could handle? I figured a good hose and reel was around $400-$500.

  • @sticktron2857
    @sticktron2857 8 месяцев назад +2

    I find the bottle runs out fast

    • @CarsWithKeav
      @CarsWithKeav  8 месяцев назад +2

      The bottle is very small compared to most foam cannons out there. Most all of my cars take about 750ml in the foam cannon of a soap and water mix. This one hold 500ml or less.

    • @sticktron2857
      @sticktron2857 8 месяцев назад +1

      @@CarsWithKeav where u got it from

  • @Elderloker_27
    @Elderloker_27 Год назад +2

    This company do shipping to puerto rico?

    • @CarsWithKeav
      @CarsWithKeav  Год назад +1

      I’m not sure. Would Need to check their website during checkout if shipping is available.

    • @Elderloker_27
      @Elderloker_27 Год назад +2

      @@CarsWithKeav we did that but there is no answer
      Even in their call number or email
      Is this company from europe?

    • @CarsWithKeav
      @CarsWithKeav  Год назад +1

      @@Elderloker_27 I’m pretty sure they are from China.

  • @sticktron2857
    @sticktron2857 8 месяцев назад +1

    Mines started leaking from bottom today 😢

    • @CarsWithKeav
      @CarsWithKeav  8 месяцев назад

      Oh no! How old was it? I hate that happened.

    • @sticktron2857
      @sticktron2857 8 месяцев назад

      @@CarsWithKeav actually got it from Amazon and I am sending it back tomorrow.The last day for sending it back Jan 31 2024 got it right before Christmas.Will get the refund I will order the pro kind with the grey hose.

  • @ephraimnorthernkingdom6795
    @ephraimnorthernkingdom6795 10 месяцев назад +2

    🤣😂🤣😂🤣😂 ...... eeeeaaaaa !!!! aaaaahhhhh jajajajaja ! funny video but cool ... lol 🤣

  • @bnorby213
    @bnorby213 Год назад +1

    Looks like my garden hose puts out more pressure 👎🏻

    • @CarsWithKeav
      @CarsWithKeav  Год назад

      Somebody reaching big time I’m sure your
      Water pipes could handle 1500 PSI. 😂 It’s not the best and not worth the money if your on a budget, but you don’t want high pressure to clean a car safely. 900 to 1200 is the sweet spot.

  • @JohnJones-zm3nb
    @JohnJones-zm3nb Год назад

    I have the plus + makes no funny noise I just want to no witch quick connect I need to buy to put on my Mc Killons short gun on my hose to gun

    • @CarsWithKeav
      @CarsWithKeav  Год назад

      If your Mckillans gun has the 3/8 male plug at the end which it normally does then you would need this to connect them. This adapter seems to never come by itself it is always paired with something, but still only $10 for both. amzn.to/3C2PgJY

  • @skyserf
    @skyserf Год назад +2

    Do they make a model that doesn’t make a noise like a distraught seal? 🦭

    • @CarsWithKeav
      @CarsWithKeav  Год назад +1

      They have actually fixed that noise and assured me all inventory is the newer model, but as I mentioned in the video the Plus+ model is almost half the price and does not make the noise. It has the upgraded hose as well.

    • @skyserf
      @skyserf Год назад +1

      @@CarsWithKeav Thanks