The GPS in Ainav burned red, it turned out that it was better to look at the instructions for Matek. RX and TX are inverted. When I connected the RX wire to the TX jack and TX to RX, everything worked and the GPS turned blue.
Thanks for the suggestions. I noticed on one of my builds that if the GPS is placed near the RX antenna (yours is Crossfire?) the Fr-Sky and ELRS telemetry from RX to TX will disturb the GPS. Repositioning is a good solution if you have the space.
Good eye, your right, that might’ve been the cause of my interference as well. I’ve already moved away all accessories from the back for direct capacitor soldering, helps cleaner electrical flow 😬
The GPS in Ainav burned red, it turned out that it was better to look at the instructions for Matek. RX and TX are inverted. When I connected the RX wire to the TX jack and TX to RX, everything worked and the GPS turned blue.
Fantastic, Congrats on getting Your GPS working 👏👏
Thanks for the suggestions. I noticed on one of my builds that if the GPS is placed near the RX antenna (yours is Crossfire?) the Fr-Sky and ELRS telemetry from RX to TX will disturb the GPS. Repositioning is a good solution if you have the space.
Good eye, your right, that might’ve been the cause of my interference as well.
I’ve already moved away all accessories from the back for direct capacitor soldering, helps cleaner electrical flow 😬
This issue hapen with me now ...
Does it happen even if inav or betaflight ah bro?
@@TanFK my issue is cable lossed from board .... i fix it already by re soldering
@@nugrostv4600 good to hear you manage to solve it. The gps wires that come with the packet is sometimes low quality. So problems can come from them