I saw this video when you posted it a few years ago. I just wanna say your video is hands down the best on youtube and a massive thank you sir for sharing your skills and knowledge 👍
Great guide this mate! Nice to see someone doing it with close ups and encountering and then resolving the issues every tinter has whilst starting out.
Great Demo Vid . Nice Work ! Easy to Follow instructions. I failed my first attempt on 2 small rear windows not realizing the cheap heat gun i got off ebay wasn't hot enough to actually shrink , so now im going to borrow a real heat gun and have another go soon.
You all prolly dont care at all but does anybody know a way to log back into an instagram account?? I was stupid lost the login password. I would love any tips you can give me
@Hezekiah Abdiel I really appreciate your reply. I found the site thru google and im waiting for the hacking stuff atm. Takes a while so I will reply here later with my results.
This is the only video I've found where you explain how to shrink the fingers and where to place them first. I'm going to try and do mine Again with this extra knowledge. Thanks.
@@ryanbrilliant6793 yeah I messed it up 😒 it all went well except one of the corners wouldn't tuck in to both sides at the same time and it ended up creasing and not sticking down. But 3 of the windows were OK I still need to do the back 1. I bought ready cut tint so now I need to buy a roll to replace the 1 window. But I managed to get the fingers out by using this video. I guess i just need more practice. But thanks 😁
Thank you for the video, this really helped me a lot learning online., there was guy who tried to charge me £400 just to teach me how to tint the window.. ridiculous.. thank you again!!
Bro!! You're an absolute legend. I've watched a few videos now on this but nobody was answering the key questions. Is the tint directional? What solution are you using etc. You literally addressed every single point. I'm gonna attempt this over the weekend armed with all the knowledge you passed on. God bless you brother 🙏
@@ryanbrilliant6793 Fully flopped lol. Took the roll outside. A gust of wind came and creased the whole roll 😂 Tried cutting the film against the rubber seals but ended up with a fully jagged edge. I've done all sorts of mechanical, electrical and paint jobs but I think tinting just ain't for me 😂 I may try again when I have some free time
My tinting foil came in as foil only, not a carton roll in there. Not expecting it to be that slippery, the whole inside of the roll just slide down and as an reacting I grabbed it harder, causing it to crease the whole roll..😭. for those who have a similar roll, I recommend holding it at the bottom or with two hands and roll it out over the window as you stick it to the window
Great vid. Fully explaining and getting rid of the fingers.... should have watch your vid before my first attempt on the rear window... 2nd attempt is going to be so much easier. Thanks
@@boblad77 got on fine apart from the door part. The rear did not shrink as well as I wanted. Be patient. I was hurrying it a bit. Turned out alright though.
thank you for a clear easy to follow instruction, appreciate your video! I will attempt my first tint ever on the hatchback of my toyota hiace! do you think a hair dryer will be hot enough for shrinking? and..i've noticed small rectangular compartments on the inside of the glass itself that connect the defrosting wires..i reckon i'll cut from outside the window and see the line of the boxes..fingers cross it'll all line up nicely!! Thanks again.
Dan Davidson mate are you thicker than glass itself. Bro you always cut on the glass just don’t dig the knife in and you won’t scratch it. How else are you going to cut the tint to shape without being a bell end and wasting excess time
Hey, can you tell me why you don't heat-shrink and cut to size, before moving to the inside? I don't understand that part. If you cut it when it's all wrinkled, how does it fit properly on the inside? Thanks in advance.
I don’t understand I was following all the steps an then it got to the bit where u first squeege the middle part and across then the two sides going up and down but even the first time I put there squeegee on the glass and went across it jus scrunched up and I ended up getting cracks everywhere in it where it wasn’t laying down was so fckn frustrating
use a heat gun to heat the outside whilst pushing the bubbles back down. eventually they will stick. unless there to big and if so that means you did heat shrink sufficiently
Good job! Tip? Use a brown card to shrink or some kind of plastic tool. Works much better than a glove and cut the shrinking time in half. Each finger should take 4 to 5 passes up and down.
No bro, you ain’t got it right. You need to use a glove on very curvy windows else the card isn’t flexible and it will crease the tint as you push down on the fingers
Proper good job. Tried this today, all i can say is get the fingers vertical. I tried shrinking horizontal fingers and it creases immediately. Details do matter. I'll report my results when im done.
Im done with that. Still doesnt look acceptable and i dont want to roll my windows down. After about 5 rolls i came to the conclusion that film really matters. At first i thought im just making mistakes, but cheap chinese stuff is really thin, you can shrink only tiny fingers, if you handle it like the dude in this video you're getting nowhere. It scratches very easily when pushing out the solution, even when using a soft squeege and lubricating the surface. Need to get my hands on some proper film, problem is, nobody sells it in my area, only tint shops have it since they buy in bulk. If you can get your hands on something like genuine 3M( a lot of fakes out there) stuff then by all means try it, if its the shenzen special "solarwindowfilm" then dont bother, you'll wreck your nerves. Honestly you get what you pay for.
Hi there dear friend, I like your video, if I use not expensive film tint, and like cheap as usual, they sell in accessories shops, is going to be easy to install, or I have to buy, something, quality, like something expensive , I will be happy to have your positive reply, any film tint company, recommendation
Yes mate this is me. Use Suntek tint. You can buy it from mdpsupplies.co.uk. Problem with the cheaper tint is that it won’t heat shrink and it makes the job a lot harder because it is such bad quality
no its much easier to do it on the outside because the film is thicker as u haven't removed the outer protective layer and also more space to work around
I saw this video when you posted it a few years ago. I just wanna say your video is hands down the best on youtube and a massive thank you sir for sharing your skills and knowledge 👍
Great guide this mate! Nice to see someone doing it with close ups and encountering and then resolving the issues every tinter has whilst starting out.
thanks so much mate!
You made it look so easy, I tried 4 times and couldn't even get creases out and wasted half the tint roll 🤣
Great Demo Vid . Nice Work ! Easy to Follow instructions. I failed my first attempt on 2 small rear windows not realizing the cheap heat gun i got off ebay wasn't hot enough to actually shrink , so now im going to borrow a real heat gun and have another go soon.
You should post more videos!! You’re a true teacher. You have a clear way of explaining things
You all prolly dont care at all but does anybody know a way to log back into an instagram account??
I was stupid lost the login password. I would love any tips you can give me
@Nicolas Achilles instablaster ;)
@Hezekiah Abdiel I really appreciate your reply. I found the site thru google and im waiting for the hacking stuff atm.
Takes a while so I will reply here later with my results.
@Hezekiah Abdiel it did the trick and I finally got access to my account again. I'm so happy:D
Thanks so much, you saved my account!
@Nicolas Achilles No problem :D
You taught me and now I’m teaching others! U a hero!
Helped me for real, no dry shrinking etc. Thanks boss.
This is the only video I've found where you explain how to shrink the fingers and where to place them first.
I'm going to try and do mine Again with this extra knowledge.
Thanks.
your very welcome. how is it going? need more help?
@@ryanbrilliant6793 yeah I messed it up 😒 it all went well except one of the corners wouldn't tuck in to both sides at the same time and it ended up creasing and not sticking down.
But 3 of the windows were OK I still need to do the back 1.
I bought ready cut tint so now I need to buy a roll to replace the 1 window.
But I managed to get the fingers out by using this video.
I guess i just need more practice.
But thanks 😁
You make it look so easy boss lol, I'm going to have a crack at doing it. Thanks for the guide
2 years later still waiting to tint my side window's, least the back looks sweet 😂😂
Its impossible in bravo 2 to tint side Windows without taking out Window from door 😓
Thank you for clearly explaining how to shrink the film.... many tutorials on here of how to tint but they gloss over the shrinking.
Nice job, never gonna attempt this but if i did, now i'm an expert. keep up the good work
Thank you, Easyest guide I seen online yet
Thank you for the video, this really helped me a lot learning online., there was guy who tried to charge me £400 just to teach me how to tint the window.. ridiculous.. thank you again!!
hi great to know. how can I help further? anything your struggling with?
@@ryanbrilliant6793 no brother! Now practicing on my mates cars..😅
Thanks Ryan, I was struggling to get a bubble free finish. I'm having one more attempt with the last of my tint using your tutorial.
How did it go
Brilliant video helped me
Alot cheers bud!
Bro!! You're an absolute legend. I've watched a few videos now on this but nobody was answering the key questions. Is the tint directional? What solution are you using etc. You literally addressed every single point. I'm gonna attempt this over the weekend armed with all the knowledge you passed on.
God bless you brother 🙏
hey bro thanks so much for the positive comment. how did you get on? I can help you furthermore? thanks
@@ryanbrilliant6793 Fully flopped lol. Took the roll outside. A gust of wind came and creased the whole roll 😂
Tried cutting the film against the rubber seals but ended up with a fully jagged edge.
I've done all sorts of mechanical, electrical and paint jobs but I think tinting just ain't for me 😂
I may try again when I have some free time
@@salimsheikh2580 haha I fuck everything hopefully this not going to be the case with this
@@Prince-yw4lk Good luck broski!
Bro best window tint video I think I seen simple easy to follow. 👍
My tinting foil came in as foil only, not a carton roll in there. Not expecting it to be that slippery, the whole inside of the roll just slide down and as an reacting I grabbed it harder, causing it to crease the whole roll..😭. for those who have a similar roll, I recommend holding it at the bottom or with two hands and roll it out over the window as you stick it to the window
That was quite honest guide mate ty
Great vid. Fully explaining and getting rid of the fingers.... should have watch your vid before my first attempt on the rear window... 2nd attempt is going to be so much easier. Thanks
hey how did it go?
@@ryanbrilliant6793 sort of ok. Side widows was spot on, but the rear tailgate window, not so good
It's mi t my brother. Great job. I do great on all windows. Just have some trouble with the rear window and I just got a good lead. Tha KS again
Great tutorial. About to tackle mine today. this is very helpful indeed.
how did you get on? am going do mine tomorrow..
@@boblad77 got on fine apart from the door part. The rear did not shrink as well as I wanted. Be patient. I was hurrying it a bit. Turned out alright though.
Good job, nice and clean and clear
Great video bro u made it look so easy
thank you for a clear easy to follow instruction, appreciate your video! I will attempt my first tint ever on the hatchback of my toyota hiace! do you think a hair dryer will be hot enough for shrinking? and..i've noticed small rectangular compartments on the inside of the glass itself that connect the defrosting wires..i reckon i'll cut from outside the window and see the line of the boxes..fingers cross it'll all line up nicely!! Thanks again.
Bro! Excellent tutorial
Great video man. 👍
I don't know why but you make me laugh so much.
Nice and easy video for new people thanks
Excellent vid ,not full of bulls...t straight to the job.thx
Mate this it full of bullshit you would never cut on the glass like that in case you damaged the glass
Dan Davidson mate are you thicker than glass itself. Bro you always cut on the glass just don’t dig the knife in and you won’t scratch it. How else are you going to cut the tint to shape without being a bell end and wasting excess time
good vid man, clear info and nice result!
Excellent video
How can i make the film adhere to the edges on the screen printing of the glass? I have the whole edge with the white effect of non-adhesion....
I have a question, I don’t have a heat gun what can I do? I was thinking of using a hair dryer? Or is it necessary to use a heat gun?
Have never seen somebody shrink w a glove that’s dope 👍
Will be trying that
Thanks dude a lot of healp , Peace
Brilliant job mate! How much would you charge for my 5 door mk5 vw golf?
Great done
Great video
Hey, can you tell me why you don't heat-shrink and cut to size, before moving to the inside? I don't understand that part. If you cut it when it's all wrinkled, how does it fit properly on the inside? Thanks in advance.
Really good tutorial, make,s it look easy "I'am sure it's not though" lol .
WOW! your good!
what do you think of these ebay pre-cut tints? would that be a better option for non cutting?
Excellent
Great job I need a heat gun 😁
Hey Mate, great video! Just wanted to know what % tint did you use for this car ?
It’s limo tint, 5% light
Very nice 👌👌👌👌🚗🚗
Quality thanks for sharing 🙌🏽
brilliant
Just wondering why you didn't used soap with a cloth or baby powder ??? You just used water with washing up liquid and looks better I think
Hi. you said you leave us the links where we can find what we need..
Can you use a hair dryer instead of the heat gun
很棒的工作...
Hi,like your video ,same rear car window price please.kind regards .are you near London
Good Mr
Reason that my foil doesn’t shrink right is just bad foil? What foil do i need to look at?
really east to follow
If u dont have a heat gun can u still go ahead with tinting
How much do you charge for tinting?
If I buy pre cut tints do I still need the heat gun for it to work? Thanks for this video
yes
What brand tint do you use
Great about to do my corsa this week
How can I purchase this tint film in the U.K?
Where do you get tint from ?
Can I use hair dryer instead heat gun?
I don’t understand I was following all the steps an then it got to the bit where u first squeege the middle part and across then the two sides going up and down but even the first time I put there squeegee on the glass and went across it jus scrunched up and I ended up getting cracks everywhere in it where it wasn’t laying down was so fckn frustrating
i was wondering,could a home window tint film be used on a car window?would it shrink?
no it won't shrink
Nice job, I'll give this a shot since I don't trust anyone else to touch my shitbox. Is it worth getting the expensive film?
yeap! you can try Llumar ATC. it is much better.
Thats one of the most easy back glass to do !
It all depends on the shape of the glass
All the ppl struggling to tint. Practise makes Perfect. You cant expect a perfect fit first time😂
Nice vid. Make more pls.
Let's see the side window video!
Bro 😅😅😆😆😆tf .. We in Jamaica only use the spray bottle, the squeegee and the stencil .. it turns out better than this 😂😂
👍
The headace occurs later when the air bubbles creeks back on the edges.
use a heat gun to heat the outside whilst pushing the bubbles back down. eventually they will stick. unless there to big and if so that means you did heat shrink sufficiently
Bravvvo
How do get a perfect dot matrix?
Doing a H pattern this thick whilst also wet shrinking will cause you a world of problems on curvier windows
👥👍👌🏻bien
Good job! Tip? Use a brown card to shrink or some kind of plastic tool. Works much better than a glove and cut the shrinking time in half. Each finger should take 4 to 5 passes up and down.
Did you see my last video? Could help you cut all so.
No bro, you ain’t got it right. You need to use a glove on very curvy windows else the card isn’t flexible and it will crease the tint as you push down on the fingers
👨🎓👍
Did the tint ever interfere with the defrosting lines?
It doesn't
Proper good job. Tried this today, all i can say is get the fingers vertical. I tried shrinking horizontal fingers and it creases immediately. Details do matter. I'll report my results when im done.
Im done with that. Still doesnt look acceptable and i dont want to roll my windows down.
After about 5 rolls i came to the conclusion that film really matters. At first i thought im just making mistakes, but cheap chinese stuff is really thin, you can shrink only tiny fingers, if you handle it like the dude in this video you're getting nowhere. It scratches very easily when pushing out the solution, even when using a soft squeege and lubricating the surface. Need to get my hands on some proper film, problem is, nobody sells it in my area, only tint shops have it since they buy in bulk.
If you can get your hands on something like genuine 3M( a lot of fakes out there) stuff then by all means try it, if its the shenzen special "solarwindowfilm" then dont bother, you'll wreck your nerves. Honestly you get what you pay for.
Would a hair dryer work any bit for this
Yes it will but will take longer
IsJohnsons baby shampoo is that Yelow one??
Hi there dear friend, I like your video, if I use not expensive film tint, and like cheap as usual, they sell in accessories shops, is going to be easy to install, or I have to buy, something, quality, like something expensive , I will be happy to have your positive reply, any film tint company, recommendation
Yes mate this is me. Use Suntek tint. You can buy it from mdpsupplies.co.uk. Problem with the cheaper tint is that it won’t heat shrink and it makes the job a lot harder because it is such bad quality
like
Greetings, what shampoo do you use?
Head and shoulders
ben chan nice t
Why did i get a rainbow effect in some places when looking from outside?
probably just condensation so should go
Why do we stick n shrink outside and place the sticker inside finally? Can we instead place the sticker inside directly and shrink it?
no its much easier to do it on the outside because the film is thicker as u haven't removed the outer protective layer and also more space to work around
@@ryanbrilliant6793 Got it. Thanks for the reply!
Great tutorial
Hilarious
Ok now front doors please
I wouldn't want him to do my car, made an easy job hard
Hi mate how much on average can you make doing this
Sky's the limit!
Way to complicated dry shrinking is much easier
Can u use a hairdryer rather than a heat gun
Not not hot enough, tried with a crap heat gun and did not work
Suntek it's a good film?
If it's carbon based then yes. The other/cheap stuff will fade in the sun as it's coloured using dye.