@Charles X it went pretty good really had a hard time with that back window of a Camry but came out pretty good tips on your videos really help lots thanks
bro i love watching your video over and over i do tint for leaving but i will put your tec Nic in use soon ,, i love when you strink it with the torch,, one day i want to be as good as you
helpful tip**** if you are trying to cut around the border for the window, have a buddy hold their phone flashlight right under your razor from the inside, helps a LOT
I hand cut tint on every car, because I'm mobile. I also use a shop light inside so there's no guessing where I'm cutting. Every new Camry I've done has a fold down rear seat. Much easier on the knees and back installing on the rear. Super easy to pull the 3rd brake light. Slide to the right and lift and pop the connector off. Good job.
"MAN THANK YOU!!.." I liked!.."i shared!.."& i subscribed!!.."THANK YOU!.."LMAO!.." U have made me so excited about my new.."SIDE HUSTLE" tinting windows 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍✌
I shrink sideways all the time . great video! Gotta leave the film long hit it then cut it off. Works well. On the Camry cut the bottom on edges then slide it up. Save a crapload of time. Fold one seat down to install.
8:25 is solved by a cheaper LED (!) floodlight from a construction/tools store and a gallow stand (like a microphone or cymbal stand), so you can stick it in through the rear passenger doors without it touching the interior of the car. Even better 2 floodlights back to back, so usable from either side but you can also just rotate it horizontally into a position that covers the whole windshield at once.
What is your dawn to water ratio for the mix you use to spay on the windows? Do you leave a little extra as for as the fingers on the back glass because you were going to shrink the material to fit? Why did you not try to set the material a little tighter on the glass so you would not have to shrink so many fingers?
I like your video there very informative however everyone shows how to take fingers out but no one talks about the heat setting.I have a single-speed one will that do?1500 Watt 11 Amp Heat Gun
when you use a hard card to wet shrink any imperections in or on the glass will transfer to the film. It will cause the film to fail with a granular look. Dry shrink is the only way to shrink. Another shread of advice, keep the heat gun cord off the body. You will destroy a paint job by dragging the cord across the body.
Dave's World 77 you want to stay away from dish soap degreaser’s are hard on the adhesive. Baby shampoo is what I have found works best. Not to mention I noticed dish soap leaves streaks on the door panels If not dried fast enough.
Baby shampoo hands down. If your film company tests the film under warranty they will not warranty it if you use dish soap. Aka degreaser. Destroys the adhesive.
Sir, what is the good measurement for wet spray, I am trying to put film on my Audi A4 2009, I been searching many methods none of them gives correct or honest measurement,thank you good luck in your business and RUclips channel
Thanks for all your info brother I really appreciate you giving tips on how todo window tinted what film do you recommend to used thanks in advance keep the good work👍👌
Excellent video - Your film is awesome it shrinks much better than the film I bought off of Amazon. On my Ford Crown Vic the large curved rear window is a nightmare because the film won’t shrink to fit Is there a quality film that a DIYer can buy with good to excellent heat shrinking capability like your film? I put 20% VLT on my car but here in Massachusetts I have to remove it each year in order to pass inspection
Hey buddy, i attempted to do a rear window on a 06 civic sedan, those big finger bubbles kept reoccuring on the edges, whats the trick? I did heat shrink, was that necessary?
what type or kind of heat gun (watts, temp, voltage, not sure how they go by) you recommend for heat shrinking? Im trying to tint the windows for my vehicle and its going to be my firs time (yikes lol) o yea what kind of film would you recommend for a 2018 Accord? thank you for your time
Professional at work!!! When you are doing the tint shrinking on the upper right side I noticed scratches on the bottom part, are those on the film itself or the films glue side protective plastic? Thanks. How much do you charge to get all windows tinted, let's say 2018 optima?
would it have helped if you remove the head rests from the back seats? I noticed when you were putting the tint in the tint scraped the top of the head liner. I'm looking to re-tint my Scion tC and relearning the tricks of the trade, a friend and I used to tint windows back in the day when there was't much curves on the windows. Very helpful and informative.
To prevent contamination from the top u can use the California roll technique. He uses an old technique that only works for a shop user but not for a MOBILE tinter.
Tried doing my own back glass tonight, had those "fingers" wreaking havoc when I was trying to squeegee it on, now I see where I went wrong having not shrunk it at all. Gotta find someone with a heat gun I can borrow 🤔
Hey can u do a video on a single piece back glass of any pickup truck?? I did one today and the side windows came out perfect but the back glass was absolutely trash 😭
? for you. I had my 2012 bmw 7 series Li tinted today and tint shop had bubble problems on by back rear windshield since is has the defroster lines. The did it 3 times and no success. They did show me other cars they did with defrost lines with no problems. They are telling me that i have some kind of damage defroster lines thats preventing tint from sticking. What advise would you give me since they are telling to that i need to replace my back windshield, THANKS.
Hi, can i ask a practical question based on your expertise? I hav a vann without windows at the rear . Can i use tint film on the outside giving the impression there are windows? Will it hold? And if so, can it be removed if necessary in the future (to sale my vann)
Hey Dave, can u "PLEASE! make us a really quick list of the tools will need to do window tinting to get us started.."THANK YOU!👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍✌
Glad these videos exist for when your instructor doesn’t make enough time to show you how to finish properly.
Excellent and very informative video explaining in depth what to look out for and how to get out of situation of window tinting, great job guys 🙏
Next week I'll be attempting a tint install on my daughter's car this has been really helpful thanks David
@Charles X it went pretty good really had a hard time with that back window of a Camry but came out pretty good tips on your videos really help lots thanks
Great informative video. Thinking of starting up my own tinting business and these videos help a lot. Keep up the good work. Mick Northern Ireland 👍🍻
"Finesse" You're a friggin artist.. It's hypnotic watching you work
Super informative and detailed video, making it look simple
Best tint video on RUclips!
Awesome job! You are the MASTER!
bro i love watching your video over and over i do tint for leaving but i will put your tec Nic in use soon ,, i love when you strink it with the torch,, one day i want to be as good as you
helpful tip**** if you are trying to cut around the border for the window, have a buddy hold their phone flashlight right under your razor from the inside, helps a LOT
Hey... Really appreciate the video. Many thanks ma brother.
Nice video thanks for your time. I learned a lot with this tutorial!!
You're so good at doing it
gracias por demostrar tu talento, eres un profecional. muy buen trabajo.
Awsome job,perfection
I hand cut tint on every car, because I'm mobile. I also use a shop light inside so there's no guessing where I'm cutting. Every new Camry I've done has a fold down rear seat. Much easier on the knees and back installing on the rear. Super easy to pull the 3rd brake light. Slide to the right and lift and pop the connector off. Good job.
Shop light idea is great. I put 5% in my wife's car rear windshield. Couldn't have done it without this.
Thank you VERY much for sharing your knowledge. Can’t wait to tint my Jag!
"MAN THANK YOU!!.." I liked!.."i shared!.."& i subscribed!!.."THANK YOU!.."LMAO!.." U have made me so excited about my new.."SIDE HUSTLE" tinting windows 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍✌
“Alright now that window is SHRANK” lol good video helped me out. I kept fucking up my shrinking process by too much heat and creasing.
You make cutting look so easy :-D
Good Work! Made it look easy and well presented. Talent and patience and a good drive like you have you can go anywhere
The best video ever
Nice job man, simple steps 👊🏾
Many thanks for this video. A++++
I shrink sideways all the time . great video! Gotta leave the film long hit it then cut it off. Works well. On the Camry cut the bottom on edges then slide it up. Save a crapload of time. Fold one seat down to install.
GREAT DEMO LOOKING TO ADD TINT TO MY SERVICES AND THIS WAS A HUGE HELP
To cut the film the easy way is if you put a light inside following the line of the window.
Olso u can try the dealer white placards to se the border better with light. Is all common sense lol
Also you can cut the bottom edge and slide it up ? No light needed..
Excelente trabajo , saludos de colombia
Man you r a pro thanks for you video
Leonel Flores
Thanks
As always if you have any questions ask away
Awesome work
Thanks a lot. Very well done.
Good job thao for the video helps a lot
Good work!
8:25 is solved by a cheaper LED (!) floodlight from a construction/tools store and a gallow stand (like a microphone or cymbal stand), so you can stick it in through the rear passenger doors without it touching the interior of the car. Even better 2 floodlights back to back, so usable from either side but you can also just rotate it horizontally into a position that covers the whole windshield at once.
Great video bro💯🏁
You make it look so easy. Heat shrinking is harder than you make it look.
Great vid. Very informative.
Do you have a dry install vid.?
Would like to see how that's done. Wanting to tint my 2019 Bullitt.
nice info Dave!
Great Video.
Thanks Dave!
Thanks bro.. Shiiiitt i needed that
😄
Thank you ..currently struggling with rear window definitely need a bulldozer
Straight to the point
That was a good vid, i will have to have another crack at mine later
Yes this guy helped more than anyone else on the net. Great camera work also BTW, without that we are lost sheeps...
GOOD WORK
This video ain’t teachx nothx ...ur just showcasing urself. Crazzyyyy!!!
What is your dawn to water ratio for the mix you use to spay on the windows? Do you leave a little extra as for as the fingers on the back glass because you were going to shrink the material to fit? Why did you not try to set the material a little tighter on the glass so you would not have to shrink so many fingers?
Nice vid bro!
Very well done, bub. Thanks for sharing.
bro you made that look hella easy.
I like your video there very informative however everyone shows how to take fingers out but no one talks about the heat setting.I have a single-speed one will that do?1500 Watt 11 Amp Heat Gun
you knocked that install out like it was nothing and fast no 2nd attempts.
when you use a hard card to wet shrink any imperections in or on the glass will transfer to the film. It will cause the film to fail with a granular look. Dry shrink is the only way to shrink. Another shread of advice, keep the heat gun cord off the body. You will destroy a paint job by dragging the cord across the body.
Good work
Excess not access. Very informative video otherwise.
That was distracting as hell.
Exactly!! That wasn’t a southern accent, that’s just using the wrong word!.... over and over again.
mike miller p
Man u a male karen
We the 3rd class workers, thats how we talk, its dialect, not misuse of words😅👊🏾
Great video, do you use heat gun at the end or you just let it dry out like that?
Magical 🎉 👍✅
An led light pack on the inside rear tray will help you to see better
For solution I’m using dawn dish soap
Use baby shampoo less suds bro
Dave's World 77 you want to stay away from dish soap degreaser’s are hard on the adhesive. Baby shampoo is what I have found works best. Not to mention I noticed dish soap leaves streaks on the door panels If not dried fast enough.
@@rkchevy1408 That's what I use, much better and smells better.
Baby shampoo hands down. If your film company tests the film under warranty they will not warranty it if you use dish soap. Aka degreaser. Destroys the adhesive.
When do you use stainless and when do you use carbon steel blades?
Sir, what is the good measurement for wet spray, I am trying to put film on my Audi A4 2009, I been searching many methods none of them gives correct or honest measurement,thank you good luck in your business and RUclips channel
Thanks for all your info brother I really appreciate you giving tips on how todo window tinted what film do you recommend to used thanks in advance keep the good work👍👌
So there is no glue of any kind just a soapy water and it stays on? No heating it afterwards either?
How do you brake in new yellow turbo can you sand them ??? Leaving streaks ???
Easy with hard card on the top
I need an answer on this.. so i don't need to pull of anything like a foil?
Excellent video - Your film is awesome it shrinks much better than the film I bought off of Amazon.
On my Ford Crown Vic the large curved rear window is a nightmare because the film won’t shrink to fit
Is there a quality film that a DIYer can buy with good to excellent heat shrinking capability like your film?
I put 20% VLT on my car but here in Massachusetts I have to remove it each year in order to pass inspection
Hey buddy, i attempted to do a rear window on a 06 civic sedan, those big finger bubbles kept reoccuring on the edges, whats the trick? I did heat shrink, was that necessary?
Good video
what type or kind of heat gun (watts, temp, voltage, not sure how they go by) you recommend for heat shrinking?
Im trying to tint the windows for my vehicle and its going to be my firs time (yikes lol)
o yea what kind of film would you recommend for a 2018 Accord? thank you for your time
R Estrada Heatgun Type- Wager Furno 300, 1200 W. Available in Walmart/Home depots and many more places for around $24.
Professional at work!!!
When you are doing the tint shrinking on the upper right side I noticed scratches on the bottom part, are those on the film itself or the films glue side protective plastic?
Thanks.
How much do you charge to get all windows tinted, let's say 2018 optima?
I believe those scratches are only in the clear film overtop of the sticky side.
Marcodoz
On protective layer
Marcodoz
About a100 bucks
Super champion of the world
Hi I’m a beginner like what size tint should I order. Not sure like how do I know if it’s long enough?? Thanks
would it have helped if you remove the head rests from the back seats? I noticed when you were putting the tint in the tint scraped the top of the head liner. I'm looking to re-tint my Scion tC and relearning the tricks of the trade, a friend and I used to tint windows back in the day when there was't much curves on the windows. Very helpful and informative.
If you look at 14:36 I think this year they don't come out of the car.
To prevent contamination from the top u can use the California roll technique. He uses an old technique that only works for a shop user but not for a MOBILE tinter.
@@andresdena6052 I use Cali roll a lot for back glasses. All the time for FULL windshields
What temperature did you have the heat gun on when you did this video, low or high setting?
High Temp
Hey bud wats the name of the tint and where can i order it from
Good vid. Is hair dryer can use in the rear windshield?
Yes
how do get around the rear wiper if a car has it on there.
Would you want to do the back first, so you could see?
Tried doing my own back glass tonight, had those "fingers" wreaking havoc when I was trying to squeegee it on, now I see where I went wrong having not shrunk it at all. Gotta find someone with a heat gun I can borrow 🤔
“I’m a little height deprived” lol
Hey can u do a video on a single piece back glass of any pickup truck?? I did one today and the side windows came out perfect but the back glass was absolutely trash 😭
like Window Film
I used the strips but got alot of bubbles I tried using a squeegee but it didn't solve the problem.
Man you make it look so easy. Back windows are still my weak point..
noweyjose1
Well.
Come out someday all I’ll spend a day with ya and get you rolling!!
TD-us where are you located?
noweyjose1 Texas
TD-us damn I’m in Illinois
noweyjose1
Hop skip and a jump
Love you bosd
? for you. I had my 2012 bmw 7 series Li tinted today and tint shop had bubble problems on by back rear windshield since is has the defroster lines. The did it 3 times and no success. They did show me other cars they did with defrost lines with no problems. They are telling me that i have some kind of damage defroster lines thats preventing tint from sticking. What advise would you give me since they are telling to that i need to replace my back windshield, THANKS.
ruclips.net/video/6YO6WlwwtiI/видео.html
nice
Hi, can i ask a practical question based on your expertise?
I hav a vann without windows at the rear .
Can i use tint film on the outside giving the impression there are windows?
Will it hold?
And if so, can it be removed if necessary in the future (to sale my vann)
Mc Dee Rick
I’m sure it would peel off
Why do you want it to look like if you have windows ??
👍
I bought 40" × 20' tint is that enough for a 2018 Camry????
Yes if you cut the 40" to half for the side windows. Leave it 40" for back window.
Recently had done for my mercedes e class i have seen alots bubbles
Question is
After tinted film how many days later bubbles will go away??
4 weeks
Daeshawn Taylor thanks very much , all better now
Or you just use some light below so its easy to see where you cut
Hey Dave, can u "PLEASE! make us a really quick list of the tools will need to do window tinting to get us started.."THANK YOU!👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍✌
A blade, a squirt bottle filled with whatever you want, the fanny pack, and your “common sense”. lol
my only problem is the dotmatrix always poping out a very small fingers, heat is not working some times the heat is making it worse
What machine do you use to cut? What the cost for the specific model you have?
Michelle Muncy-Silva those machines and software typically run around 3-4000 $$
#ThankYouForTheWatches xD
hey lovely job, i want to get into the tinting Business. Can you give me a list of the tools I Will need and where I can get them to buy. Thanks
Access?