A suggestion: Cut the board that attaches to the mobile home with an angle on the top. Then caulk the gap. That will allow the water to run off without pooling.
I am in the process of purchasing a manufactured home, and opted for smart panel skirting. As I am not a handy man, I am paying a $4,000 upgrade for this. Tons of respect here to those who can do these jobs themselves.
@@EastTexasHomestead did you vent your skirting? i know it's been 3 years but this could be part of your mildew/mold problem. hardieboard claims that their material holds up in harsh weather so i would imagine that would include snow and rain even directly onto it. how has it held up since you finished your project? i am also gearing up to do my skirting and looking at different cheap materials to use. thanks
Hello I am hoping you will comment back but how did you mount the top of the hardie panel to the home under the trim you made Thank you for this video btw! We really needed it!!!
Looks amazing, but did you include any venting? What is the product used for the skirting below the 2x6’s? I’ve been looking for a skirting solution that I absolutely loved and this is it for our summertime Mobile!
Thanks! Yes. I went back and put vents in. I used 4x8 Hardie Panels. Be sure to paint them quick and they will start to crumble (eventually) where they come in contact with the ground.
I like the look. It seems like home ownership is a never ending project. I know my house uses up a lot of my weekends (though at the moment I can't stay out of the garden lol) keep up the great vids, I really enjoy getting to see another Texan homesteading.
+Alec Capel you've got that right about home ownership! We really had to limit ourselves on the garden this year knowing that we had so many projects on the house. I'm glad you're able to spend time and yours! When we purchased this mobile home for $3500, we expected to do a lot of work on it, but I had no idea what I was getting into! It'll all be worth it when we're done though. Thanks for the great comment! It's always awesome to hear from other Texas homesteaders.
Water will still find a way in. that skirting should be set back from the exterior siding dude. Give it 2 years in Texas and yu'll have rot. My only suggestion now is to get some wide metal drip rails and try to get them in place. If it were me, I'd take that 2x6 off and then run a small drip rail.
The part that was painted has held up great. There are a few spots that I left natural that need to be replaced. Over time, the moisture breaks down the board. I'd also recommend stopping a bit higher than the ground and finishing that off with some flashing or something else.
At a minimum you should cut a 45 on the entire top of that 2x6. All the caulk in the world won't keep standing water away very long. Hope that will help my friend, it will at least allow the caulk to do its intended job. Great video.
@@EastTexasHomestead You must be the moderator for ur channel and delete the negative comments. They will attract more negative comments. Looks like u have great family. U should feel fortunate.
Thanks Jimmy. I am fortunate and a blessed man. For the most part, I let all the comments slide. I do on occasion block, delete or mark as spam when they get out of hand.
2/3 of video is how to install trim + a couple of minutes devoted to how to cut the hardieboard + last 30 second shows shirting all done Where's the beef?
It's been 3 years and is holding up great, except where I bumped it with the tractor. Even then, it's just dented a bit. Be sure to paint it for best results.
@@EastTexasHomestead how did u fasten the 2x4s to the ground? Im thinking about doing something similar, thought about just using long tent stakes but I am not sure that would be strong enough, thanks
Why would you take the time to elevate your lumber off the ground but not your bottom plate? No one told you that earth to wood contact is a very bad idea? Maybe a creosote treated timber.
I wish you could have talked and explain what you were doing while you were doing it. I wanted to learn how to put skirting on a mobile home and I didn't learn anything here. I hate to say anything negative about RUclips channels but as I said you didn't explain what you were doing while you were doing it!
Sorry to disappoint you but this was not intended to be the definitive guide to installing mobile home skirting. It was merely a vlog of my day for my subscribers. I'm a web developer, not a builder, and I was crafting this design as I went. This is not the recommended way to do it, nor is it the best way. I intended to inspire people to get out there and get stuff done, even if they don't know precisely how.
Mobile homes, what a pain, ask me how i know:) I had one question though,don't mean to sound like a know it all,but that 2x6? you ran around the parameter...what keeps water getting behind it and rotting the sheathing/2x6/wall out? it looks like a great rain trap? will you rely on just paint/caulk?
+a4000t my plan is to caulk the seams between the 2 x 8 and the cement board real good before painting the wall. It may have to be redone every 10 years or so but I think some good 40year caulk will be fine for now. The cement board is not going to rot and the cedar is pretty rot resistant. Good input though.
That was a quick reply, i hope that works well for you.I shot a 2x2 on the underside about 3/8 from the siding and slipped the underpinning up in it and shot a screw, so it was basically behind the sheeting a bit.
Disappointing. Video does not actually show how the skirting was installed. Lots of footage on the trim, but nothing on how to install the siding as skirting. Footage of the skirting is before and after only.
This is a good video. Now the wood will not last but a few years and rot away. And the lip the wood makes will collect debris and accelerate the rot. By the way I love the helper in the window. 🙏🏽
The would at the bottom should be good for a long time since it is rated for ground contact. But you're right. It will eventually go. I've not seen water standing/pooling on the top ledge. It may not be the best design but it's working well for now.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
A suggestion: Cut the board that attaches to the mobile home with an angle on the top. Then caulk the gap. That will allow the water to run off without pooling.
What did you put under the Hardie board to keep it off the ground?
I am in the process of purchasing a manufactured home, and opted for smart panel skirting. As I am not a handy man, I am paying a $4,000 upgrade for this. Tons of respect here to those who can do these jobs themselves.
Learn to do it!
Great video brother. Very informative and helpful advice for my project. Thanks
You have a neat workshop
Thanks :)
Thanks so much for doing this video? It helps me so much on how im going to do my skirting. I even thought about lattice for my skirting.
You bet. Just be sure you have good drainage and if at all possible, don't let the HB touch the ground. I've had a bit of a mildew issue.
@@EastTexasHomestead did you vent your skirting? i know it's been 3 years but this could be part of your mildew/mold problem. hardieboard claims that their material holds up in harsh weather so i would imagine that would include snow and rain even directly onto it. how has it held up since you finished your project? i am also gearing up to do my skirting and looking at different cheap materials to use. thanks
Rats will get you.
Nice job!😊
Hello I am hoping you will comment back but how did you mount the top of the hardie panel to the home under the trim you made Thank you for this video btw! We really needed it!!!
with that red iron ore you got to be some where between Henderson and Dangerfield
Not bad... We’re north of Tyler.
Looks amazing, but did you include any venting? What is the product used for the skirting below the 2x6’s? I’ve been looking for a skirting solution that I absolutely loved and this is it for our summertime Mobile!
Thanks! Yes. I went back and put vents in. I used 4x8 Hardie Panels. Be sure to paint them quick and they will start to crumble (eventually) where they come in contact with the ground.
Nice work but you need Z flashing so water comes over the 2 x 10's..
That was so cool how you broke that plywood in half
Thanks
Was hoping to see step by step action, for example, what’s the board nailed too?
I like the look. It seems like home ownership is a never ending project. I know my house uses up a lot of my weekends (though at the moment I can't stay out of the garden lol) keep up the great vids, I really enjoy getting to see another Texan homesteading.
+Alec Capel you've got that right about home ownership! We really had to limit ourselves on the garden this year knowing that we had so many projects on the house. I'm glad you're able to spend time and yours! When we purchased this mobile home for $3500, we expected to do a lot of work on it, but I had no idea what I was getting into! It'll all be worth it when we're done though. Thanks for the great comment! It's always awesome to hear from other Texas homesteaders.
Water will still find a way in. that skirting should be set back from the exterior siding dude. Give it 2 years in Texas and yu'll have rot. My only suggestion now is to get some wide metal drip rails and try to get them in place. If it were me, I'd take that 2x6 off and then run a small drip rail.
How has the Hardie board held up over the years? Thank you
The part that was painted has held up great. There are a few spots that I left natural that need to be replaced. Over time, the moisture breaks down the board. I'd also recommend stopping a bit higher than the ground and finishing that off with some flashing or something else.
How are the treated boards on the bottom secured?
We have hard clay soil so I drove 10 inch galvanized nails threw them into the ground.
Answer and question I was looking for!
I see you're getting creative with the video angles! Cool!
Thanks! Just having a little fun. :)
At a minimum you should cut a 45 on the entire top of that 2x6. All the caulk in the world won't keep standing water away very long. Hope that will help my friend, it will at least allow the caulk to do its intended job. Great video.
@@EastTexasHomestead You must be the moderator for ur channel and delete the negative comments. They will attract more negative comments. Looks like u have great family. U should feel fortunate.
Thanks Jimmy. I am fortunate and a blessed man. For the most part, I let all the comments slide. I do on occasion block, delete or mark as spam when they get out of hand.
@@jimmyschmidt14nah, Billy is right, and he's comment/suggestion is not negative, I'd take as helpful, he knows what he's talking about.
Do you have Video on how to make an access door in the skirting?
I don’t. Sorry. That would be a good one to do though.
Great skills!
Thanks!
45° edge on the 2x6 will be best agains rain
Great idea!
2/3 of video is how to install trim + a couple of minutes devoted to how to cut the hardieboard + last 30 second shows shirting all done
Where's the beef?
agree totally, you stole the comment I was going to leave.
well...at least he did not film himself waking up and getting coffee...all most though.
Nice, this is exactly how RUclips was intended.
Nice job!
Thanks! It looks pretty nice now that it's painted and the wood is stained. I'll have to get some new videos out showing it.
can you tell me how this has worked out? I read about people who say it lasts, and others that say it won't work. Any advice is appreciated.
It's been 3 years and is holding up great, except where I bumped it with the tractor. Even then, it's just dented a bit. Be sure to paint it for best results.
@@EastTexasHomestead how did u fasten the 2x4s to the ground? Im thinking about doing something similar, thought about just using long tent stakes but I am not sure that would be strong enough, thanks
What type of hardie panel is this?
I don’t remember. I’m pretty sure it was the standard siding.
Nice looking skirt
Thanks Nick!
Why would you take the time to elevate your lumber off the ground but not your bottom plate? No one told you that earth to wood contact is a very bad idea? Maybe a creosote treated timber.
I wish you could have talked and explain what you were doing while you were doing it. I wanted to learn how to put skirting on a mobile home and I didn't learn anything here. I hate to say anything negative about RUclips channels but as I said you didn't explain what you were doing while you were doing it!
Sorry to disappoint you but this was not intended to be the definitive guide to installing mobile home skirting. It was merely a vlog of my day for my subscribers.
I'm a web developer, not a builder, and I was crafting this design as I went. This is not the recommended way to do it, nor is it the best way. I intended to inspire people to get out there and get stuff done, even if they don't know precisely how.
If you round the top of board with router will stop it from being a water trap.
That’s a good idea. Thanks!
Mobile homes, what a pain, ask me how i know:) I had one question though,don't mean to sound like a know it all,but that 2x6? you ran around the parameter...what keeps water getting behind it and rotting the sheathing/2x6/wall out? it looks like a great rain trap? will you rely on just paint/caulk?
+a4000t my plan is to caulk the seams between the 2 x 8 and the cement board real good before painting the wall. It may have to be redone every 10 years or so but I think some good 40year caulk will be fine for now. The cement board is not going to rot and the cedar is pretty rot resistant. Good input though.
That was a quick reply, i hope that works well for you.I shot a 2x2 on the underside about 3/8 from the siding and slipped the underpinning up in it and shot a screw, so it was basically behind the sheeting a bit.
+a4000t I bet that worked pretty good.
So far its been there 10 yrs. i am all for simple/easy lol.Just 5986 more projects to finish. good luck on you're repairs.
+a4000t lol I know what you mean. There's always a never ending list of projects.
Looks great
Disappointing. Video does not actually show how the skirting was installed. Lots of footage on the trim, but nothing on how to install the siding as skirting. Footage of the skirting is before and after only.
This was more like an ad for the jack
This is a good video. Now the wood will not last but a few years and rot away. And the lip the wood makes will collect debris and accelerate the rot. By the way I love the helper in the window. 🙏🏽
The would at the bottom should be good for a long time since it is rated for ground contact. But you're right. It will eventually go. I've not seen water standing/pooling on the top ledge. It may not be the best design but it's working well for now.
And termites?
WTF was this? lol Never showed the hardie board being installed AT ALL.
Nice video but I wish you would explain what you're doing for us novices.
Looks like a lot of lumber
👍🏼
Rotten already
Music is so distracting on DIY videos. 😑
Sorry